Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LB1862MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating voltage of 3.8-16.8V, and output current of 0.5A. It is a Brushless DC Motor Controller in a small outline package suitable for applications requiring precise motor control at temperatures ranging from -30 to 90°C.
Median Price
$0.467
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.458
1k+ parts
$0.381
10k+ parts
$0.339
Verical
$0.476
$0.424
Digiode
$0.374
Nova Conductors
$0.389
Chip Stock
Vyrian
Flip Electronics
ACDS - Activité Composants Distribution Service
Bristol Electronics
Dan-Mar Components
Ampacity Inc.
$0.335
Corphita
$0.355
Corohmni
AZTECH Wire
$6.320
$6.070
$5.950
$5.830
Advanced Electronics
$20.073
$18.266
$16.460
Component Stockers USA
$99.990
Lixinc
Authorized Procurement Solutions
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
TANS Electronics
UHIMA Technologies
Perfect Parts
Bastille Electronics
Kepictronics
Futuretech Components
Microchip USA
Provides durability and protection for the internal components of the Motion Control ICs.
Standard voltage requirement for easy integration with existing systems and components.
Allows for reliable performance in a wide range of operating conditions.
Ensures that the Motion Control ICs can be used in cold environments without any issues.
Capable of handling high output currents to drive motors efficiently.
Utilizes bipolar technology for precise control and efficient operation of motors.
Motion Control ICs LB1862MC-AH attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LB1862MC-AH Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 7/Apr/2021
PCN Design/Specification - Mult Dev Material Chg 12/Dec/2018
PCN Assembly/Origin - Mult Devices 23/Feb/2018
PCN Other - Temporary Suspension 08/Sep/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Motorola
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
A3988SJPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3988SJPTR-T is a Motion Control IC with 4 functions, suitable for Stepper Motor Controller applications. It operates at 3.3V nominal voltage and supports power supplies of 3.3/5,36V. The package style includes flatpack, heat sink/slug, low profile, fine pitch design for compact integration in various electronic devices.
IRAMS10UP60B
Infineon Technologies
IRAMS10UP60B by Infineon Technologies is a Motion Control IC with 15V supply voltage, 15A output current, and 25 terminals. It is an AC motor controller suitable for automotive applications due to its hybrid technology and wide operating temperature range (-40 to 125°C).
BD62220AEFV-E2
ROHM
ROHM's BD62220AEFV-E2 is a small outline motion control IC with 28 terminals, operating voltage range of 8-28 V, and max output current of 2.8 A. Ideal for brush DC motor control applications, it offers a temp range of -25 to 85 °C and compact dimensions (9.7mm x 4.4mm x 1mm).
FSB50450TB
Fairchild Semiconductor
Fairchild Semiconductor's FSB50450TB is a Motion Control IC with 23 terminals, operating at 12-15V. It features a max output current of 3A and a nominal voltage of 13.5V. This AC Motor Controller has a compact MICROELECTRONIC ASSEMBLY package suitable for various motion control applications.
FSBB15CH60C
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 15 A; Terminal Position: DUAL;
L6226QTR
STMicroelectronics
L6226QTR by STMicroelectronics is a Motion Control IC with 32 terminals, operating voltage range of 8-52V. It features BCDMOS technology, automotive-grade temperature rating (-40 to 150°C), and is ideal for brush DC motor control applications.
STSPIN32F0251Q
BRUSHLESS DC MOTOR CONTROLLER;
E-L6219
E-L6219 by STMicroelectronics is a Motion Control IC with 24 terminals and a max output current of 1A. It operates at a nominal voltage of 5V, making it suitable for stepper motor control applications. The package style is in-line with dimensions of 31.75mm x 7.62mm x 4.32mm, ideal for various motion control systems.
L293B
Sgs-ates Componenti Electronici S P A
Motion Control Electronics; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Pitch: 2.54 mm;
L6207D
L6207D by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage of 8-52V, and max output current of 2.8A. Ideal for automotive applications, this BCDMOS technology-based Stepper Motor Controller offers dual terminal position in a small outline package.
L6208PD
L6208PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage of 48V, and max output current of 5.6A. Ideal for automotive applications, this BCDMOS technology-based IC features a small outline package with a rectangular shape and gull wing terminals for precise stepper motor control.
DRV8704DCPR
Texas Instruments
DRV8704DCPR by Texas Instruments is a Motion Control IC with 38 terminals, operating b/w -40 to 85°C. It features a supply voltage range of 1.7V to 1.9V and a max current of 22mA, making it ideal for industrial stepper motor control applications. The compact rectangular package design with gull wing terminals ensures efficient heat dissipation and reliable performance in various motion control systems.
A4984SLPTR-T
A4984SLPTR-T by Allegro MicroSystems is a motion control IC with a supply voltage range of 3V to 5.5V and max output current of 2A. It is commonly used as a stepper motor controller in various applications.
DRV8830DRCR
DRV8830DRCR by Texas Instruments is a Motion Control IC with 10 terminals, operating voltage of 3-6.5V, and max output current of 1A. Ideal for industrial applications like brush DC motor control due to its compact square package and wide temperature range (-40 to 85°C).
IKCM30F60GDXKMA1
IKCM30F60GDXKMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 60A. Ideal for AC motor control applications in industrial settings due to its temp range of -40°C to 100°C and compact rectangular package design (36mm x 21mm x 5.6mm).
DRV8842PWPR
Texas Instruments DRV8842PWPR is a motion control IC with 5A max output current and 24V nominal voltage. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package style, and supports stepper motor control.
DRV2605YZFR
DRV2605YZFR by Texas Instruments is a Motion Control IC with 9 terminals and a supply voltage range of 2.5V to 5.5V. It features a max output voltage of 5.5V, operates in industrial temperature grades (-40°C to 85°C), and is suitable for brush DC motor control applications due to its thin profile grid array package style.
DRV8848PWP
DRV8848PWP by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4-18V, and max output current of 2A. Ideal for brush DC motor control applications, it features a small outline package with nickel palladium gold finish and can operate in industrial temperature range (-40 to 85°C).
A4964KEVTR-J
Allegro MicroSystems' A4964KEVTR-J is a Motion Control IC with 36 terminals, suitable for automotive applications. It operates b/w -40 to 150°C, supporting supply voltages from 5.5V to 50V. This brushless DC motor controller in a square package shape is surface mountable and has a very thin profile.
VNH3SP30-E
VNH3SP30-E by STMicroelectronics is a Motion Control IC with 30 terminals, operating at 9-36 V. It features a max output current of 30 A and supports brush DC motor control applications. The package style is small outline with gull wing terminals, making it suitable for surface mount designs in various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB1867M-TLM-H
LB1867M-TLM-H by Onsemi is a Motion Control IC with 12/24V power supplies, 14 terminals, and operating temperatures from -30 to 80°C. It features a small outline package style for surface mount applications. This bipolar technology IC is ideal for commercial extended temperature grade applications requiring precise motion control.
LB1830MC-AH
LB1830MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating voltage of 3-9V. It features a max output current of 0.5A and operates b/w -20 to 80°C. Ideal for brush DC motor control applications due to its small outline package and bipolar technology.
LB1836M-TLM-E
Sanyo Electric
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1838M-TRM-E
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1860M-TLM-H
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1838M-TLM-E
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1836M
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1836M-MPB-E
LB1836M-MPB-E by Onsemi is a motion control IC with a supply voltage of 3V and max operating temperature of 85°C. It has 14 terminals, uses bipolar technology, and is suitable for industrial applications requiring small outline packaging.
LB1843V-TLM-E
LB1843V-TLM-E by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 7.2V, and max output current of 0.8A. Ideal for brush DC motor control applications due to its small outline package and temp range of -20 to 80°C.
LB1838M
Sanyo Semiconductor
LB1843V
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BRUSH DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 20; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1838JM-TRM-E
LB1838M-MPB-E
LB1830M-TE-L-E
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1837M-MPB-E
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1840M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved