Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LB1860M-TLM-H by Onsemi is a Motion Control IC with 14 terminals, operating at -30 to 80°C. It supports power supplies of 12/24V and has a max output current of 1.5A. Ideal for Brushless DC Motor Controllers, this IC is compact (8x4.4mm) and surface-mountable for various applications.
Median Price
$1.193
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.150
1k+ parts
$0.955
10k+ parts
$0.851
DigiKey
$1.440
Verical
$1.064
Nova Conductors
$0.895
Digiode
$0.896
Vyrian
Chip Stock
Bristol Electronics
Dan-Mar Components
DigiKey Marketplace
$0.980
Ampacity Inc.
$0.710
Corohmni
$0.752
Corphita
$0.849
Argo Parts USA
Netroflash
$0.850
$0.833
Continental Prestige Electronics
$0.805
Kepictronics
TANS Electronics
Authorized Procurement Solutions
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
Kulean Microsystems
Microchip USA
Plastic/Epoxy material provides durability and protection for the internal components of the motion control IC, ensuring long-term reliability.
Surface mount capability allows for easy and convenient installation on PCBs, saving space and reducing assembly time.
Suitable nominal supply voltage for efficient operation and compatibility with various power sources.
Supports multiple power supply options, giving flexibility in system design and compatibility with different power sources.
Wide operating temperature range allows for reliable performance in various environmental conditions.
High maximum output current capability for driving motors and other loads with ease, making it suitable for a wide range of applications.
Motion Control ICs LB1860M-TLM-H attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LB1860M-TLM-H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Fairchild Semiconductor
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
Goodwork Semiconductor
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
FSBB20CH60F
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; No. of Functions: 1;
A4935KJPTR-T
Allegro MicroSystems
Allegro MicroSystems' A4935KJPTR-T is a Motion Control IC with 48 terminals, operating b/w -40 to 150°C. Suitable for automotive applications, it supports brushless DC motor control at supply voltages ranging from 5.5V to 50V. The package style includes flatpack, heat sink/slug, and low profile features in a square shape measuring 7mm x 7mm.
A3979SLPTR-T
Allegro MicroSystems' A3979SLPTR-T is a Motion Control IC with 28 terminals, operating voltage of 3-5.5V, and max output current of 2.5A. Ideal for stepper motor control applications due to its compact size, NMOS technology, and peak reflow temp of 260°C.
DRV8434ERGER
Texas Instruments
DRV8434ERGER by Texas Instruments is a Motion Control IC with 24V nominal voltage and 2.5A max output current. It features a plastic/epoxy package body, operates in automotive temperature grade, and is suitable for brush DC motor control applications. With surface mount capability and quad terminal position, it offers high performance in compact designs.
IRMCK311TY
International Rectifier
Motion Control Electronics; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
FSB50760SFS
FSB50760SFS by Onsemi is a Motion Control IC with 23 terminals, operating at 15V. It features a max output current of 9.4A and is ideal for AC motor control applications. With a compact rectangular package style and matte tin terminal finish, it offers precise control in a small form factor.
UC3625DWTR
Unitrode
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 10 V;
DRV8350FHRTVR
DRV8350FHRTVR by Texas Instruments is a Motion Control IC with 32 terminals, operating temperature range of -40 to 125°C, and max supply voltage of 100V. It is a Brushless DC Motor Controller suitable for automotive applications due to its compact size (5x5mm) and low supply current (13mA).
BA6846FVE2
ROHM
ROHM's BA6846FVE2 is a Motion Control IC with 5V supply voltage, 0.5A output current, and 14 terminals. Ideal for BRUSH DC MOTOR CONTROL applications, it operates b/w -25 to 70°C with a compact rectangular package style. Suitable for surface mount assembly, this IC offers precise control in various motion control systems.
DRV8800PWPR
Texas Instruments' DRV8800PWPR is a motion control IC with 16 terminals and a supply voltage range of 8-38V. It features a max output current of 2.8A, NMOS technology, and operates in industrial temperature grades. Ideal for brush DC motor control applications due to its compact size, dual terminal position, and high operating temperature range up to 85°C.
TLE94106ESXUMA1
Infineon Technologies
TLE94106ESXUMA1 by Infineon is a Motion Control IC for brushless DC motor control. It operates with a supply voltage range of 5.5V to 20V and comes in a 24-terminal rectangular package suitable for surface mount applications. The IC features gull wing terminals and has a moisture sensitivity level of 2A, making it ideal for various motion control applications.
STGIB10CH60TS-L
STMicroelectronics
STGIB10CH60TS-L by STMicroelectronics is a Motion Control IC with 26 terminals, operating voltage range of 13.5V to 18V, and temp range of -40°C to 125°C. It's designed for AC motor control applications in automotive systems due to its compact rectangular package style and matte tin terminal finish.
FSB50250A
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 3.1 A; Maximum Seated Height: 3.3 mm;
IM231L6S1BALMA1
AC MOTOR CONTROLLER; Moisture Sensitivity Level (MSL): 3;
FNA25012A
FNA25012A by Onsemi is a Motion Control IC with 600V nominal voltage, 75A max output current, and -40 to 125°C operating temperature range. Ideal for AC motor control applications in automotive settings due to its hybrid technology and through-hole terminal form.
IKCM15L60GAXKMA1
IKCM15L60GAXKMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 30A. Ideal for AC motor control applications in industrial settings due to its temp range -40°C to 100°C and compact rectangular package design (36mm x 21mm x 5.6mm).
DRV8847RTET
DRV8847RTET by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 18V, and temp grade for automotive applications. It features a package style of CHIP CARRIER and is surface mountable. With a wide temp range from -40°C to 125°C, it's ideal for stepper motor control in automotive systems.
TMC5160A-WA
Trinamic Motion Control & Kg
TMC5160A-WA by Trinamic is a Motion Control IC with 47 terminals, operating voltage of 10-50V. Ideal for automotive applications, it has a temp range of -40 to 125°C and uses CMOS technology for precise stepper motor control.
DRV10866DSCR
DRV10866DSCR by Texas Instruments is a motion control IC with a square package and a small outline, heat sink/slug, very thin profile. It operates at a nominal voltage of 3V and has a max output current of 0.85A. This IC is commonly used as a brushless DC motor controller in industrial applications.
A4952ELYTR-T
Allegro MicroSystems' A4952ELYTR-T is a Motion Control IC with 8-40V power supplies, suitable for industrial applications. Featuring DMOS technology, it offers 2A max output current and operates in temperatures ranging from -40 to 85°C. This small outline IC with gull wing terminals is designed for brush DC motor control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB1867M-TLM-H
LB1867M-TLM-H by Onsemi is a Motion Control IC with 12/24V power supplies, 14 terminals, and operating temperatures from -30 to 80°C. It features a small outline package style for surface mount applications. This bipolar technology IC is ideal for commercial extended temperature grade applications requiring precise motion control.
LB1830MC-AH
LB1830MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating voltage of 3-9V. It features a max output current of 0.5A and operates b/w -20 to 80°C. Ideal for brush DC motor control applications due to its small outline package and bipolar technology.
LB1836M-TLM-E
Sanyo Electric
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1838M-TRM-E
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1838M-TLM-E
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1836M
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1836M-MPB-E
LB1836M-MPB-E by Onsemi is a motion control IC with a supply voltage of 3V and max operating temperature of 85°C. It has 14 terminals, uses bipolar technology, and is suitable for industrial applications requiring small outline packaging.
LB1843V-TLM-E
LB1843V-TLM-E by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 7.2V, and max output current of 0.8A. Ideal for brush DC motor control applications due to its small outline package and temp range of -20 to 80°C.
LB1838M
Sanyo Semiconductor
LB1843V
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BRUSH DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 20; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1838JM-TRM-E
LB1838M-MPB-E
LB1830M-TE-L-E
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1837M-MPB-E
Motion Control Electronics; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB1840M
LB1860M
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 14; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved