Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV8804FV-TRM-H by Onsemi is a Motion Control IC with 12V supply voltage, 1.2A output current, and BICMOS technology. It is used as an AC motor controller in applications requiring small outline, low profile packages for surface mount assembly.
Median Price
$1.302
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.230
1k+ parts
$1.100
10k+ parts
$1.030
Verical
$1.375
Digiode
$1.292
Vyrian
Corphita
$1.224
Corohmni
$1.360
Component Stockers USA
$1.370
$1.290
$1.170
AZTECH Wire
$9.400
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
$0.981
Problanco Electronics
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Perfect Parts
Microchip USA
UHIMA Technologies
Authorized Procurement Solutions
Plastic/epoxy material is lightweight and durable, making the product suitable for various applications.
Surface mount capability allows for easy installation on circuit boards, saving space and reducing assembly time.
Operating at a standard 12V supply voltage ensures compatibility with common power sources.
Having 20 terminals allows for a higher level of control and connectivity in the circuit.
Utilizing BiCMOS technology ensures a good balance of speed, power efficiency, and noise immunity in the IC.
Motion Control ICs LV8804FV-TRM-H attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LV8804FV-TRM-H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 1/Apr/2020 Mult Dev EOL Retraction 15/Jun/2018
PCN Assembly/Origin - LV880YYY 06/Feb/2019
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
ERJ6ENF10R0V
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Surge Components
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
L6206D013TR
L6206D013TR by STMicroelectronics is a Motion Control IC with 48V supply voltage, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, this stepper motor controller has a small outline package style and operates b/w -40°C to 150°C.
PDRV8306HRSMR
BRUSHLESS DC MOTOR CONTROLLER;
PDRV8220DSGR
PDRV8220DSGR by Texas Instruments is a motion control IC with 1 function. It operates at a supply voltage range of 4.5V to 18V and can handle a max output current of 1.76A. This IC, designed for automotive applications, is a brush DC motor controller in a square-shaped package with 8 terminals.
MAX22205ATU+T
Maxim Integrated
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: LCC38,.2X.27,20;
FSB50450S
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Matte Tin (Sn);
A5979GLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A5979GLPTR-T is a Motion Control IC with 28 terminals, operating temperature range of -40 to 105°C. It's a Stepper Motor Controller with max output current of 2.8A, suitable for industrial applications requiring precise motion control in compact spaces.
STK681-332-E
Sanyo Semiconductor
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 19; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XZFM-T19; Maximum Supply Voltage (Vsup): 5.25 V;
DRV8243HQRXYRQ1
DRV8243HQRXYRQ1 by Texas Instruments is a motion control IC with a max output current of 12A. It operates at a nominal voltage of 13.5V and has a package style of chip carrier, very thin profile. This IC is commonly used as a brush DC motor controller in various applications.
TLE7181EMXUMA1
Infineon Technologies
TLE7181EMXUMA1 by Infineon is a Motion Control IC with 24 terminals, operating voltage range of 5.5V to 45V. It's designed for brush DC motor control applications, featuring a small outline package with low profile and gull wing terminal form.
DRV8231ADSGR
DRV8231ADSGR by Texas Instruments is a Motion Control IC with 8 terminals, operating voltage range of 4.5V to 33V, and max output current of 3.7A. It is ideal for brush DC motor control applications due to its small outline package and wide temperature range (-40°C to 150°C).
MAX6651EEE-T
MAX6651EEE-T by Maxim Integrated is a Motion Control IC with 16 terminals, operating at -40 to 85°C. It has a supply voltage range of 3-5V and output current of 0.1A. Ideal for industrial applications requiring brushless DC motor control in compact spaces.
DRV10866DSCR
DRV10866DSCR by Texas Instruments is a motion control IC with a square package and a small outline, heat sink/slug, very thin profile. It operates at a nominal voltage of 3V and has a max output current of 0.85A. This IC is commonly used as a brushless DC motor controller in industrial applications.
STSPIN32G4
BRUSHLESS DC MOTOR CONTROLLER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
DRV8306HRSMR
DRV8306HRSMR by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 6-38V, and max output current of 0.15A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish in nickel palladium gold.
E-PBL3717A
E-PBL3717A by STMicroelectronics is a Motion Control IC with 16 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 1.2A. It is designed for stepper motor control applications, featuring a rectangular package style with through-hole terminals suitable for commercial temperature grades up to 70°C.
DRV8245PQPWPRQ1
DRV8245PQPWPRQ1 by Texas Instruments is a Motion Control IC with 28 terminals and a max output current of 32A. It operates b/w -40 to 125°C, suitable for automotive applications due to AEC-Q100 screening level. The IC features BICMOS technology, GULL WING terminal form, and supports supply voltage range from 4.5V to 35V.
TDA1085C
TDA1085C by Onsemi is a Motion Control IC with 16 terminals, operating voltage range of 15-16V. It has a max output current of 0.2A and operates b/w -10 to 120°C. Widely used as a Universal Motor Controller in various applications due to its compact size and through-hole terminal form.
A4915METTR-T
Allegro MicroSystems' A4915METTR-T is a Motion Control IC with 28 terminals in a square chip carrier package. It operates b/w -20 to 105°C, suitable for Brushless DC Motor Controllers. With a supply voltage range of 3-5.5V, it offers precise control and reliability for various motion control applications.
BD63843EFV-E2
ROHM
ROHM's BD63843EFV-E2 is a Motion Control IC with 24V supply, 1.5A output current, and -25 to 85°C operating range. Ideal for stepper motor control applications due to its compact size (9.7mm x 4.4mm), low power consumption (5mA max), and bipolar technology for precise motion control.
L6470HTR
L6470HTR by STMicroelectronics is a Motion Control IC with 28 terminals, operating at supply voltages of 3.3/5V and up to 45V. It features a max output current of 7A, suitable for stepper motor control applications. The package style is small outline with gull wing terminals, making it ideal for compact designs requiring precise motion control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV8813G-AH
LV8813G-AH by Onsemi is a Motion Control IC with 20 terminals, operating voltage range of 6-16V. It's a Brushless DC Motor Controller suitable for industrial applications, offering max output current of 2A and low supply current of 7mA.
LV8811G-AH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8827LFQA-NH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LV8806QA-MH
LV8806QA-MH by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 2-6V, and output current of 0.7A. Ideal for AC motor control applications due to its industrial temperature grade and BICMOS technology. Package style is chip carrier with very thin profile, suitable for surface mount assembly.
LV8804FV-TLM-H
LV8804FV-TLM-H by Onsemi is a Motion Control IC with 12V supply voltage, 1.2A output current, and BICMOS technology. Ideal for AC motor control applications due to its small outline package style and dual terminal position. Operating temperature ranges from -30°C to 95°C, making it suitable for various industrial environments.
LV8805V-MPB-H
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 36; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8806GQ
Motion Control Electronics; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
LV8804V
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 36; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8800V-MPB-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8800V-TLM-H
LV8804V-MPB-H
LV8805V
LV8805V-TLM-H
LV8800V-TLM-E
LV8804V-TLM-H
LV8804FV
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8805SV
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8805SV-MPB-H
LV8800V
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved