Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV8805SV-MPB-H by Onsemi is a Motion Control IC with 12V supply, 1.2A output current, and BICMOS technology. Ideal for AC motor control applications in industrial settings due to its small outline package and wide temperature range from -40 to 95 °C.
Median Price
$1.832
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$6.570
100+ parts
$4.100
1k+ parts
$3.650
10k+ parts
-
Rochester
$1.600
$1.330
$1.180
DigiKey
$2.000
Verical
$1.663
$1.475
Digiode
$1.244
Chip Stock
Vyrian
Corohmni
$1.160
Corphita
$1.179
AZTECH Wire
$8.130
Advanced Electronics
$26.627
$24.231
$21.834
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
SupplyDigital Components
Perfect Parts
Problanco Electronics
TANS Electronics
UHIMA Technologies
GreenTree Electronics
Authorized Procurement Solutions
Microchip USA
Continental Prestige Electronics
$1.120
Provides durability and protection for the internal components, ensuring long-term reliability of the product.
Enables easy and efficient integration onto PCBs, saving space and facilitating automated assembly processes.
Ensures compatibility with common power supply systems, making it suitable for a wide range of applications.
Designed to operate reliably in industrial environments with varying temperature conditions, enhancing overall performance and longevity.
Capable of driving high-current loads, making it ideal for applications requiring robust motor control capabilities.
Motion Control ICs LV8805SV-MPB-H attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LV8805SV-MPB-H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - 2Q2016 Product EOL 22/Jul/2016
PCN Design/Specification - LV8805 Datasheet Update 04/Mar/2015 LV8805 Datasheet Update 04/May/2015
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Formosa Microsemi
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Synsemi
Rectron
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Vishay Telefunken
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
IRMCK311TY
Infineon Technologies
The Infineon IRMCK311TY is a Motion Control IC with 64 terminals in a square flatpack package. It operates b/w -40°C to 85°C, suitable for industrial applications. With power supplies of 1.8V and 3.3V, it utilizes CMOS technology for precise motion control systems.
A3906SESTR-T
Allegro MicroSystems
Allegro MicroSystems' A3906SESTR-T is a Motion Control IC with 20 terminals, operating voltage of 2.5-9V, and max output current of 1.5A. Ideal for stepper motor control applications due to its compact chip carrier package and CMOS technology, suitable for temperatures ranging from -20 to 85°C.
IRSM836-025MA
International Rectifier
AC MOTOR CONTROLLER; No. of Terminals: 36; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES; Maximum Supply Current (Isup): 10 mA;
LB11696V-TLM-E
LB11696V-TLM-E by Onsemi is a Motion Control IC with 30 terminals, operating at -20 to 100°C. It has a supply voltage range of 8-17 V and can handle a max output current of 0.03 A. Ideal for Brushless DC Motor Controllers, this IC is compact (9.75x5.6 mm) and surface-mountable for various motion control applications.
DRV8912QPWPRQ1
DRV8912QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals and a supply voltage range of 4.5V to 32V. It operates in temperatures from -40°C to 125°C, making it suitable for automotive applications. This IC features a small outline package with gull wing terminals and is designed for brush DC motor control systems.
L6472PDTR
L6472PDTR by STMicroelectronics is a Motion Control IC with 36 terminals, operating at a supply voltage range of 8-45V. It features a max output current of 7A and uses NMOS technology for stepper motor control applications. The package style is small outline with heat sink, making it suitable for surface mount designs in various electronic systems.
DRV8434ERGER
DRV8434ERGER by Texas Instruments is a Motion Control IC with 24V nominal voltage and 2.5A max output current. It features a plastic/epoxy package body, operates in automotive temperature grade, and is suitable for brush DC motor control applications. With surface mount capability and quad terminal position, it offers high performance in compact designs.
SI9986DY-T1
Siliconix
Motion Control Electronics; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8889AQPWPRQ1
DRV8889AQPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 45V, and output current up to 0.01A. Ideal for automotive applications due to AEC-Q100 screening level, it features a compact rectangular package with very thin profile and dual terminal position. Operating temperature ranges from -40°C to 125°C, making it suitable for demanding environments.
DRV8842PWP
DRV8842PWP by Texas Instruments is a motion control IC with a supply voltage range of 8.2V to 45V and max output current of 5A. This small outline package IC operates in industrial temperature grades from -40°C to 85°C, making it ideal for stepper motor control applications. With surface mount capability and dual terminal position, it offers high performance in a compact design.
TMC246A-PA
Trinamic Motion Control & Kg
TMC246A-PA by Trinamic: Motion Control IC for stepper motors. Nominal Vsup 3.3V, Max Isup 1.35mA, Max Output Current 7A. Ideal for automotive applications due to -40 to 125 °C operating temp range and HVCMOS technology.
IRSM515-025PA
AC MOTOR CONTROLLER;
A3967SLB-T
Allegro MicroSystems' A3967SLB-T is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at 3-5V, has a max output current of 0.85A, and measures 15.4mm in length. The IC features bipolar technology, Gull Wing terminals, and can withstand temperatures from -20 to 85°C.
STGIPS10K60T
STGIPS10K60T by STMicroelectronics is a Motion Control IC with 25 terminals, operating voltage range of 13.5V to 18V, and temperature grade suitable for automotive applications. It features a rectangular package style made of plastic/epoxy material, ideal for AC motor control in microelectronic assemblies with dimensions of 44.4mm x 22mm x 7.5mm (LxWxH).
DRV8302DCA
DRV8302DCA by Texas Instruments is a motion control IC with 56 terminals and a supply voltage range of 6-60V. It operates in temperatures from -40 to 125°C, making it suitable for automotive applications. With a max output current of 1.7A, this brushless DC motor controller comes in a small outline package ideal for surface mounting.
DRV10987DPWPR
DRV10987DPWPR by Texas Instruments is a Motion Control IC with 24 terminals and a supply voltage range of 6.2V to 28V. It operates in temperatures from -40°C to 125°C, making it suitable for automotive applications as a Brushless DC Motor Controller. With a max output current of 3A, this IC is ideal for compact designs requiring precise motion control.
MC3479PG
MC3479PG by Onsemi is a Motion Control IC with 16 terminals, operating at 12V. It features a max output current of 0.5A and operates in a temperature range of 0-70°C. Ideal for stepper motor control applications due to its bipolar technology and through-hole terminal form.
DRV8885PWPR
DRV8885PWPR by Texas Instruments is a Motion Control IC with 24V nominal voltage and 2.3A max output current. It is a stepper motor controller in a small outline package suitable for automotive applications, operating b/w -40 to 125 °C. The IC features dual terminal position, gull wing form, and 0.65mm pitch terminals.
STGIB10CH60TS-LZ
NCV7724DQBR2G
BRUSH DC MOTOR CONTROLLER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV8813G-AH
LV8813G-AH by Onsemi is a Motion Control IC with 20 terminals, operating voltage range of 6-16V. It's a Brushless DC Motor Controller suitable for industrial applications, offering max output current of 2A and low supply current of 7mA.
LV8811G-AH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8827LFQA-NH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LV8806QA-MH
LV8806QA-MH by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 2-6V, and output current of 0.7A. Ideal for AC motor control applications due to its industrial temperature grade and BICMOS technology. Package style is chip carrier with very thin profile, suitable for surface mount assembly.
LV8804FV-TLM-H
LV8804FV-TLM-H by Onsemi is a Motion Control IC with 12V supply voltage, 1.2A output current, and BICMOS technology. Ideal for AC motor control applications due to its small outline package style and dual terminal position. Operating temperature ranges from -30°C to 95°C, making it suitable for various industrial environments.
LV8805V-MPB-H
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 36; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8804FV-TRM-H
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8806GQ
Motion Control Electronics; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
LV8804V
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 36; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8800V-MPB-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8800V-TLM-H
LV8804V-MPB-H
LV8805V
LV8805V-TLM-H
LV8800V-TLM-E
LV8804V-TLM-H
LV8804FV
LV8805SV
AC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8800V
Sanyo Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved