Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Texas Instruments' DRV8301DCA is a Motion Control IC with 56 terminals, operating at -40 to 125 °C. It supports supply voltages from 6V to 60V and offers a max output current of 1.7A. Ideal for automotive applications, this IC features a small outline package with gull wing terminals and nickel palladium gold finish.
Median Price
$8.315
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$6.019
100+ parts
$4.907
1k+ parts
$3.271
10k+ parts
-
Farnell
$7.450
$5.080
$5.010
Newark
$9.180
$6.460
$5.760
Mouser Electronics
$9.470
$6.680
$5.870
$5.790
DigiKey
$9.720
$6.863
$5.976
$5.844
Element14
$12.520
$9.360
$9.240
RS (Exports)
$5.514
Arrow
$4.457
$3.937
Digiode
$5.718
Bristol Electronics
$6.048
$2.621
$2.480
Nova Conductors
$6.330
Chip Stock
Vyrian
Dan-Mar Components
Rebound Electronics
ComSIT Distribution GmbH
ComSIT USA
Cyclops Electronics Ltd
Speed Components Ltd
NexGen Digital
Ampacity Inc.
$3.790
Semicontronic
$3.695
$3.676
Continental Prestige Electronics
$5.348
$5.241
Corphita
$5.417
Corohmni
$9.714
Advanced Electronics
$12.083
$11.479
Parana Technologies
$17.802
$17.979
DigiPath Technology Company
$19.602
ChromeModa Solutions
$20.002
$16.402
IDEA Electronic Components Group
$19.002
$18.002
Perfect Parts
S.R.D Solutions
Robosynatics
Lucentia Tech
$16.250
$15.919
Alle Elektronik GmbH
Lixinc
Authorized Procurement Solutions
Argo Parts USA
Kepictronics
Futuretech Components
Netroflash
$6.203
$6.013
$5.887
This material provides durability and protection for the internal components, making it a reliable choice for long-term use.
Surface mount technology allows for easy integration onto printed circuit boards, saving space and simplifying the assembly process.
The rectangular shape provides a standardized form factor, making it compatible with a wide range of applications and equipment.
The specified supply voltage ensures consistent performance and efficiency, making it suitable for various operating conditions.
With multiple power supply options, this IC can adapt to different voltage requirements, enhancing its flexibility and versatility.
The numerous terminals allow for easy connection to other components, enabling seamless integration and effective communication within a system.
The compact and efficient package style optimizes space usage and thermal management, making it ideal for compact designs.
The high maximum operating temperature ensures reliable performance in harsh environments, providing durability and stability under demanding conditions.
The wide temperature range allows for operation in extreme cold conditions, making it suitable for a variety of applications.
This terminal finish provides excellent conductivity and corrosion resistance, ensuring long-lasting and reliable electrical connections.
The dual terminal position offers redundancy and improved signal reliability, enhancing the overall performance and robustness of the IC.
The low seated height minimizes the overall footprint of the IC, enabling compact and space-saving designs.
The small width allows for easy integration into tight spaces, making it suitable for applications with size constraints.
This additional functionality allows for precise control and operation of brushless DC motors, expanding the range of potential applications for the IC.
The low minimum supply voltage enables energy-efficient operation, making it a cost-effective and environmentally friendly choice.
The specified reflow time ensures proper soldering and thermal management during the manufacturing process, ensuring the reliability and durability of the IC.
The high peak reflow temperature allows for secure and reliable solder joints, ensuring the long-term functionality and performance of the IC.
The compact length facilitates easy integration into various designs, making it a versatile and adaptable solution.
The automotive-grade temperature rating ensures reliable performance in automotive applications, meeting industry standards for quality and safety.
The high maximum output current capability enables driving of high-power devices, expanding the range of applications where the IC can be used.
The gull-wing terminal form provides mechanical strength and secure solder joints, ensuring reliable electrical connections and long-term durability.
The small terminal pitch allows for high-density mounting, optimizing space usage and enabling compact designs.
The specified moisture sensitivity level ensures safe storage and handling, preventing damage to the IC during transportation and assembly.
The high maximum supply voltage rating allows for compatibility with a wide range of power sources, making it suitable for diverse applications with varying voltage requirements.
Motion Control ICs DRV8301DCA attributes and parameters. Explore more Motion Control ICs devices from Texas Instruments
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
DRV8301DCA Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Datasheet Update 08/Sep/2015 Design 22/Feb/2022
PCN Assembly/Origin - Mult Devices 17/Oct/2017
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Shandong Yiguang Electronic Joint Stock
Vishay Telefunken
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IM231L6S1BALMA1
Infineon Technologies
AC MOTOR CONTROLLER; Moisture Sensitivity Level (MSL): 3;
L6235D
L6235D by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage range of 8-52V, and max output current of 5.6A. Ideal for automotive applications due to its BCDMOS technology and compact rectangular package design.
DRV8803PWPR
DRV8803PWPR by Texas Instruments is a motion control IC with a nominal voltage of 24V, suitable for industrial applications. It features a max output current of 0.02A and can operate in temperatures ranging from -40 to 85°C. With a compact rectangular package style and surface-mount capability, it offers precise control for stepper motor systems.
DRV8871DDAQ1
Texas Instruments DRV8871DDAQ1 is a Motion Control IC with 24V nominal voltage, 3.6A max output current, and AEC-Q100 screening level. Ideal for automotive applications due to its low profile design, operating temperature range of -40 to 125°C, and support for brush DC motor control.
MC3479FN
Motorola
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE; Surface Mount: YES;
L6206D
STMicroelectronics L6206D is a Motion Control IC with 24 terminals, operating voltage of 8-52V. It features BCDMOS technology, peak output current of 5.6A, and temp range -40 to 150°C. Ideal for automotive applications as a stepper motor controller in compact design with small outline package.
TLE52052GXT
TLE52052GXT by Infineon Technologies is a Motion Control IC with 7 terminals, BCDMOS technology, and a max output current of 6A. It is designed for brush DC motor control applications with a nominal voltage of 13.2V and a compact rectangular package style measuring 10mm in length and 9.25mm in width.
TB6559FG,8,EL
Toshiba
Toshiba's TB6559FG,8,EL is a motion control IC with a rectangular package shape and 16 terminals. It operates at a nominal voltage of 24V and can handle a max output current of 2.5A. This IC is commonly used as a brushless DC motor controller in various applications.
MC33035DW
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM629M-6
Texas Instruments' LM629M-6 is a Motion Control IC with 24 terminals, operating at 5V. Ideal for BRUSH DC MOTOR CONTROL applications, it has a temperature range of -40 to 85°C and supports surface mount installation.
DRV8320RSRHAR
Texas Instruments DRV8320RSRHAR is a Motion Control IC with 40 terminals, operating voltage range of 6-60V. Ideal for automotive applications, it offers max output current of 1A and temp range of -40 to 125°C. Package style: CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE.
SLA7078MPRT
Allegro MicroSystems
Allegro MicroSystems' SLA7078MPRT is a Motion Control IC with 23 terminals, operating voltage of 5V, and output current up to 3A. Ideal for stepper motor control applications, it has a temperature range from -20°C to 85°C and supports supply voltages from 3V to 5.5V.
L6207PD013TR
STMicroelectronics L6207PD013TR is a Motion Control IC with 36 terminals, operating voltage of 8-52V. It features a max output current of 5.6A and BCDMOS technology. Ideal for automotive applications due to its small outline package and dual terminal position.
MC34931EK
NXP Semiconductors
MC34931EK by NXP Semiconductors is a Motion Control IC with 32 terminals, operating at -40 to 85°C. It features a power supply range of 5-28V and uses BICMOS technology. Ideal for brush DC motor control applications due to its small outline package and industrial temperature grade suitability.
EMC2301-1-ACZL-TR
Microchip Technology
Microchip Technology's EMC2301-1-ACZL-TR is a Motion Control IC with 3.3V supply voltage, suitable for automotive applications. It features a small outline package, matte tin terminal finish, and operates b/w -40 to 125°C. Ideal for brush DC motor control with dual terminals and gull wing form factor.
DRV8803PWP
DRV8803PWP by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 8.2V to 24V, and max output current of 0.02A. It is a Stepper Motor Controller suitable for industrial applications due to its compact size, dual terminal position, and high temperature tolerance up to 85°C.
STSPIN32F0251Q
BRUSHLESS DC MOTOR CONTROLLER;
DRV10983ZPWPR
DRV10983ZPWPR by Texas Instruments is a Motion Control IC for BLDC motors with 24V nominal voltage and 3A max output current. It features a small outline package, dual terminal position, and automotive temperature grade suitability. Ideal for applications requiring precise motor control in compact spaces.
DRV8312DDWR
DRV8312DDWR by Texas Instruments is a Motion Control IC with 44 terminals, operating at -40 to 85 °C. It supports supply voltages of 10.8-52.5 V and output current up to 6.5 A, making it ideal for industrial brush DC motor control applications. The package is small outline with heat sink/slug, suitable for surface mount assembly in various electronic systems.
DRV8245HQRXZRQ1
Texas Instruments' DRV8245HQRXZRQ1 is a Motion Control IC with 16 terminals and BICMOS technology. It operates b/w -40 to 125 °C, supporting a max output current of 32 A at supply voltages ranging from 4.5 V to 35 V. Ideal for applications requiring precise control over half-bridge brush DC motors in automotive environments due to its AEC-Q100 screening level.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
DRV8701PRGER
DRV8701PRGER by Texas Instruments is a Motion Control IC with 24 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 5.9-45V and peak current of 9.5mA, it's ideal for stepper motor control systems.
DRV8871DDARQ1
DRV8871DDARQ1 by Texas Instruments is a Motion Control IC with 8 terminals and a supply voltage range of 6.8V to 45V. It operates in automotive-grade temperatures from -40°C to 125°C, making it suitable for brush DC motor control applications. With a max output current of 3.5A, this IC is designed for compact designs requiring high performance in harsh environments.
DRV8825PWP
DRV8825PWP by Texas Instruments is a motion control IC with 2.5A output current and 24V nominal voltage. Ideal for brush DC motor control, it operates in industrial temperature range (-40 to 85°C) and features small outline package style.
DRV8801AQRMJRQ1
DRV8801AQRMJRQ1 by Texas Instruments is a Motion Control IC with 16 terminals in a square chip carrier package. It operates b/w -40 to 125°C, suitable for automotive applications. This DMOS technology controller has a max output current of 2.8A, making it ideal for brush DC motor control in compact designs.
DRV8412DDWR
DRV8412DDWR by Texas Instruments is a Motion Control IC with 2 functions, operating at a supply voltage range of 12-50V. This IC is ideal for Stepper Motor Controllers, featuring a max output current of 15A and terminal finish of Ni/Pd/Au. With a compact package style and industrial temperature grade, it offers precise control in various applications.
DRV8711DCP
DRV8711DCP by Texas Instruments is a motion control IC with a nominal voltage of 24V. It is a stepper motor controller with a max operating temperature of 85°C, making it suitable for industrial applications. Its compact size and surface mount capability make it easy to integrate into various systems.
DRV8301DCAR
Texas Instruments' DRV8301DCAR is a Motion Control IC with 56 terminals and a supply voltage range of 6-60V. Ideal for automotive applications, it offers a max output current of 1.7A, operating temperatures from -40 to 125°C, and surface-mount compatibility in a small outline package.
DRV8833CPWPR
DRV8833CPWPR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 10.8V, and max output current of 1A. Ideal for brush DC motor control applications in industrial settings due to its compact size and wide temperature range from -40°C to 85°C.
DRV8432DKDR
Texas Instruments' DRV8432DKDR is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at -40 to 85°C, supports a max output current of 15A, and has a nominal voltage of 50V. The package style is small outline with gull wing terminals and measures 15.9mm in length.
DRV8412DDW
Texas Instruments' DRV8412DDW is a Motion Control IC with 44 terminals and 2 functions. It operates b/w -40 to 85 °C, supporting a supply voltage range of 0-50 V. Ideal for industrial applications, it offers a max output current of 15 A and peak reflow temperature of 260 C.
DRV8825PWPR
DRV8825PWPR by Texas Instruments is a Motion Control IC with 2.5A output current and 24V nominal voltage. Ideal for brush DC motor control, it operates in industrial temperature range (-40 to 85°C) and supports surface mount installation.
DRV8701ERGER
DRV8701ERGER by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage of 5.9-45V, and temp range of -40 to 125°C. Ideal for automotive applications, it features a compact square package with nickel/palladium/gold finish and no-lead terminals for precise stepper motor control.
DRV8711DCPR
DRV8711DCPR by Texas Instruments is a motion control IC with a nominal voltage of 24V. It features a small outline package style, dual terminal position, and can operate in industrial temperature grades. This stepper motor controller has a max supply voltage of 52V and is suitable for applications requiring precise motion control in various industries.
DRV8873HPWPRQ1
Texas Instruments' DRV8873HPWPRQ1 is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 38V, and temp grade for automotive applications. It features a small outline package with heat sink, suitable for brush DC motor control in harsh environments up to 125°C. The IC's nickel palladium gold finish ensures reliable performance in various conditions.
DRV8872DDARQ1
DRV8872DDARQ1 by Texas Instruments is a Motion Control IC with 24V nominal voltage and 3.5A max output current. Ideal for automotive applications, it features AEC-Q100 screening level, -40 to 125°C operating temperature range, and GULL WING terminal form.
DRV8302DCAR
DRV8302DCAR by Texas Instruments is a Motion Control IC with 56 terminals, operating voltage of 6-60V, and max output current of 1.7A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish in NiPdAu.
DRV8870DDAR
DRV8870DDAR by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 6.5V to 45V. It offers a max output current of 3.6A, making it suitable for brush DC motor control applications in automotive environments. With a compact rectangular package style and low profile design, it can operate in temperatures ranging from -40°C to 125°C.
DRV8701ERGET
Texas Instruments DRV8701ERGET is a Motion Control IC with 24 terminals, operating voltage of 5.9-45V, and temp range -40 to 125°C. Ideal for automotive applications as a stepper motor controller due to its compact square package and low supply current of 9.5mA.
DRV8873SPWPRQ1
DRV8873SPWPRQ1 by Texas Instruments is a motion control IC with a nominal voltage of 13.5V and a max operating temperature of 125°C. It is used as a brush DC motor controller in automotive applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved