Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics L6207PD013TR is a Motion Control IC with 36 terminals, operating voltage of 8-52V. It features a max output current of 5.6A and BCDMOS technology. Ideal for automotive applications due to its small outline package and dual terminal position.
Median Price
$5.247
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$8.650
100+ parts
$5.700
1k+ parts
$5.360
10k+ parts
$5.170
Newark
$8.910
$5.860
$5.740
-
Chip1Stop
$5.818
$5.297
Arrow
$3.638
Verical
Element14
$10.840
$9.420
Farnell
$4.790
$4.590
DigiKey
$5.068
Future Electronics
$4.550
Nova Conductors
$7.556
Digiode
$8.027
Chip Stock
Vyrian
RLX Solution Inc.
ComSIT Distribution GmbH
Anansix
IBS Electronics
$6.227
$5.778
Ashlea Components Ltd
Semicontronic
$4.070
$3.968
$3.948
Ampacity Inc.
Corphita
$7.604
Vigor
$7.690
IDEA Electronic Components Group
$8.175
$7.358
Continental Prestige Electronics
$10.100
$6.810
Corohmni
$10.708
Advanced Electronics
$12.576
$11.947
MKK Technologies
$15.373
DigiPath Technology Company
Microchip USA
$20.007
Aztec Data Supply Inc.
$21.400
Kepictronics
Lixinc
Authorized Procurement Solutions
RC Electronics
Argo Parts USA
A-Z Elektronik GmbH
Alle Elektronik GmbH
Robosynatics
Lucentia Tech
$8.756
$8.578
Benley Electronics
Bastille Electronics
iodParts Technologies Inc.
GreenTree Electronics
Parana Technologies
$9.775
Plastic/Epoxy material provides durability and reliability to the package, ensuring the product can withstand various operating conditions.
Surface mount capability allows for easy and efficient assembly onto circuit boards, saving time and costs during production.
The 48 V supply voltage offers sufficient power for the motion control ICs to operate effectively, providing reliable performance.
With a high maximum operating temperature of 150°C, the motion control ICs can function in demanding environments without overheating.
The low minimum operating temperature of -40°C ensures that the product remains operational even in extremely cold conditions.
BCDMOS technology offers high efficiency and performance in controlling stepper motors, making it an ideal choice for motion control applications.
Motion Control ICs L6207PD013TR attributes and parameters. Explore more Motion Control ICs devices from STMicroelectronics
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
L6207PD013TR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Devices 27/Feb/2019
PCN Packaging - Box Label Chg 28/Jul/2016 Material Barrier Bag 17/Dec/2020
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Transistor
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
EU2B-YS3303C
Idec
ROTARY SWITCH;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Semicoa
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC33886VW
Freescale Semiconductor
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
A3901SEJTR-T
Allegro MicroSystems
Allegro MicroSystems' A3901SEJTR-T is a Motion Control IC with 3-5V supply, 0.4A output current, and -20 to 85°C operating temperature range. Ideal for stepper motor control applications due to its small outline package and dual terminals design.
A3906SESTR-T
Allegro MicroSystems' A3906SESTR-T is a Motion Control IC with 20 terminals, operating voltage of 2.5-9V, and max output current of 1.5A. Ideal for stepper motor control applications due to its compact chip carrier package and CMOS technology, suitable for temperatures ranging from -20 to 85°C.
IKCM15H60GAXKMA2
Infineon Technologies
Infineon's IKCM15H60GAXKMA2 is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 24A. Ideal for automotive applications due to its temp range of -40°C to 125°C and AC motor control capabilities in a compact rectangular package.
DRV8350FSRTVR
DRV8350FSRTVR by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 9-10V, and max output current of 1A. Ideal for automotive applications, it features a compact square package shape and can withstand temperatures from -40 to 125°C.
E-L6219
E-L6219 by STMicroelectronics is a Motion Control IC with 24 terminals and a max output current of 1A. It operates at a nominal voltage of 5V, making it suitable for stepper motor control applications. The package style is in-line with dimensions of 31.75mm x 7.62mm x 4.32mm, ideal for various motion control systems.
A3909GLNTR-T
Allegro MicroSystems' A3909GLNTR-T is a Motion Control IC with 10 terminals, operating voltage range of 4-18V, and max output current of 1A. Ideal for Brushless DC Motor control applications due to its compact size, low profile design, and dual terminal position.
NCV33035DWR2G
NCV33035DWR2G by Onsemi is a Motion Control IC with 24 terminals, operating temperature range of -40 to 125 °C. It is a Brushless DC Motor Controller suitable for automotive applications, featuring a supply voltage range from 10V to 30V and max output current of 0.1A.
BD6231F-E2
ROHM
ROHM's BD6231F-E2 is a Motion Control IC with 24V supply voltage, 1A output current, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring brush DC motor control in compact spaces due to its small outline package and dual terminal position.
DRV8876RGTR
DRV8876RGTR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4.5V to 37V, and max output current of 3.5A. Ideal for automotive applications, this chip carrier with heat sink/slug package can withstand temperatures from -40°C to 125°C while controlling brush DC motors efficiently.
DRV8912QPWPRQ1
DRV8912QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals and a supply voltage range of 4.5V to 32V. It operates in temperatures from -40°C to 125°C, making it suitable for automotive applications. This IC features a small outline package with gull wing terminals and is designed for brush DC motor control systems.
FSB50450TB
Fairchild Semiconductor
Fairchild Semiconductor's FSB50450TB is a Motion Control IC with 23 terminals, operating at 12-15V. It features a max output current of 3A and a nominal voltage of 13.5V. This AC Motor Controller has a compact MICROELECTRONIC ASSEMBLY package suitable for various motion control applications.
MC33887APVW
DRV8803DWR
Texas Instruments' DRV8803DWR is a motion control IC with 20 terminals, supporting stepper motor control. It operates b/w -40 to 85°C, with a supply voltage range of 8.2V to 60V and max output current of 1.5A, making it ideal for industrial applications requiring precise motion control in compact spaces.
A4915METTR-T
Allegro MicroSystems' A4915METTR-T is a Motion Control IC with 28 terminals in a square chip carrier package. It operates b/w -20 to 105°C, suitable for Brushless DC Motor Controllers. With a supply voltage range of 3-5.5V, it offers precise control and reliability for various motion control applications.
DRV8304HRHAR
DRV8304HRHAR by Texas Instruments is a Motion Control IC with 40 terminals, operating temperature range of -40 to 125°C, and supply voltage from 6V to 38V. It is ideal for automotive applications as a Brushless DC Motor Controller in a compact square package suitable for surface mount assembly.
A3977KEDTR
Allegro MicroSystems' A3977KEDTR is a Motion Control IC in PLASTIC/EPOXY package with 44 terminals. It operates at -40 to 125 °C and supports 3-5.5 V supply voltage range. Ideal for automotive applications, it's a Stepper Motor Controller with NMOS technology and can handle up to 2.5A output current.
PS21964-4S
Powerex
AC MOTOR CONTROLLER; No. of Terminals: 24; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): MICROELECTRONIC ASSEMBLY; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
L6227QTR
L6227QTR by STMicroelectronics is a Motion Control IC with 48V supply voltage, 2.8A output current, and BCDMOS technology. Ideal for automotive applications, it features a square package shape, matte tin terminal finish, and operates b/w -40 to 150°C.
DRV8873SPWPR
DRV8873SPWPR by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 38V, and temperature grade suitable for automotive applications. It features a small outline package with heat sink, dual terminal position, and nickel palladium gold finish ideal for brush DC motor control. With a compact size of 7.8mm x 4.4mm and wide operating temperature range (-40°C to 125°C), it is designed for high-performance motion control systems in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L6206PD
STMicroelectronics L6206PD is a Motion Control IC with 36 terminals, operating voltage of 8-48V. It's a Stepper Motor Controller in small outline package suitable for automotive applications, with max output current of 5.6A and temp range -40 to 150°C.
L6205PD013TR
STMicroelectronics L6205PD013TR is a Motion Control IC with 48V Vsup, 5.6A output current, and BCDMOS technology. Ideal for automotive applications due to its -40 to 150 °C operating temperature range and small outline package style. It features dual terminals in a rectangular shape suitable for stepper motor control.
L6205PD
STMicroelectronics L6205PD is a Motion Control IC with 48V nominal voltage, 5.6A max output current, and BCDMOS technology. Ideal for automotive applications due to its small outline package and dual terminal position. Supports stepper motor control with a wide operating temperature range from -40°C to 150°C.
L6208D
L6208D by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage of 8-48V, and output current up to 5.6A. Ideal for automotive applications, this BCDMOS technology-based IC offers dual terminal position and small outline package style for stepper motor control.
L6206PD013TR
STMicroelectronics L6206PD013TR is a Motion Control IC with 36 terminals, operating voltage of 8-48V. It's a Stepper Motor Controller in small outline package for automotive applications, supporting max output current of 5.6A at temp range -40 to 150°C.
L6206QTR
STMicroelectronics L6206QTR is a Motion Control IC with 48 terminals in a square chip carrier package. Operating temperature ranges from -25 to 125 °C, supporting stepper motor control applications. Features DMOS technology, 8-52V supply voltage range, and compact dimensions of 7x7mm for versatile motion control solutions.
L6202
Sprague Electric
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
L6206Q
STMicroelectronics L6206Q is a Motion Control IC with 48 terminals in a square chip carrier package. Operating temperature ranges from -25 to 125°C, suitable for stepper motor control applications. Features include DMOS technology, 8-52V supply voltage range, and compact dimensions of 7x7mm.
L6208PD013TR
STMicroelectronics L6208PD013TR is a Motion Control IC with 36 terminals, operating voltage of 48V, and output current up to 5.6A. Ideal for automotive applications, it features BCDMOS technology, peak reflow temp of 245°C, and small outline package style.
L6208D013TR
STMicroelectronics L6208D013TR is a Motion Control IC with 48V supply voltage, 5.6A output current, and BCDMOS technology. Ideal for automotive applications due to its small outline package style, dual terminal position, and wide operating temperature range from -40°C to 150°C.
L6205D013TR
STMicroelectronics L6205D013TR is a Motion Control IC with 1 function, suitable for Stepper Motor Controllers. It operates b/w -40 to 150°C, with a supply voltage range of 8-52V and max output current of 5.6A. The package style is small outline, making it ideal for automotive applications.
L6205D
STMicroelectronics L6205D is a Motion Control IC with 48V nominal voltage, 5.6A max output current, and BCDMOS technology. Ideal for automotive applications due to its small outline package style and dual terminal position. Suitable for stepper motor control in various industrial settings.
L6206D
STMicroelectronics L6206D is a Motion Control IC with 24 terminals, operating voltage of 8-52V. It features BCDMOS technology, peak output current of 5.6A, and temp range -40 to 150°C. Ideal for automotive applications as a stepper motor controller in compact design with small outline package.
L6207PD
STMicroelectronics L6207PD is a Motion Control IC with 36 terminals, operating voltage of 8-48V. It's a Stepper Motor Controller in small outline package for automotive applications, supporting max output current of 2.8A at temp range -40 to 150°C.
L6206D013TR
L6206D013TR by STMicroelectronics is a Motion Control IC with 48V supply voltage, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, this stepper motor controller has a small outline package style and operates b/w -40°C to 150°C.
L6207D013TR
STMicroelectronics L6207D013TR is a Motion Control IC with 48V supply voltage, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, it features a small outline package, dual terminals, and operates b/w -40 to 150°C.
L6208PD
L6208PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage of 48V, and max output current of 5.6A. Ideal for automotive applications, this BCDMOS technology-based IC features a small outline package with a rectangular shape and gull wing terminals for precise stepper motor control.
L6207QTR
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
L6206N
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved