Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Median Price
$6.004
Lifecycle Status
Suppliers In-Stock
48
In-Stock Inventory
1k+
Bürklin Elektronik
1+ parts
$5.560
100+ parts
-
1k+ parts
10k+ parts
Verical
$6.448
$4.759
Distrelec
Freelance Electronics
$2.396
Digiode
$5.282
Nova Conductors
$6.355
Anansix
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Vyrian
Schukat
$10.951
Q Components
Prism Electronics
Freddi Giovanni
GES GmbH
Manoshevitz Elec. Sales
ComSIT Distribution GmbH
Zilex Electronics Inc.
J & M Industries LLC
Bristol Electronics
Cogito LLC
Greenchips
SIE Connect GmbH - GreenChips
LittleDiode
Atlantic Semiconductor
Connector Distribution Corp
Right Parts Inc.
Lakeview Electronics
Inventory MP
ACDS - Activité Composants Distribution Service
Pegasus Components GmbH
MRC Electronics
ComSIT USA
Sinequanon
Inland Empire Components Inc.
ECAB
Mil-Aero Solutions, Inc.
Electronic Expediters
NAC Semi
Fibra_Brandt Electronic GMBH
Huijzer Components
Halfin
EMSNET
R&J Components
Cyclops Electronics Ltd
PC Components Company LLC
Microfarads
MISTER SPROCKETS
Holdelec - ElecDif-Pro
Ampacity Inc.
$4.730
Semicontronic
$4.612
$4.588
Corphita
$5.004
Continental Prestige Electronics
$5.937
$5.818
IDEA Electronic Components Group
$6.074
$5.466
AZTECH Wire
$6.503
Vigor
$7.420
MKK Technologies
$11.421
DigiPath Technology Company
Corohmni
$13.918
Aztec Data Supply Inc.
$15.165
Advanced Electronics
$23.435
$22.263
Perfect Parts
Lixinc
RC Electronics
$6.360
$5.810
$5.640
Kepictronics
S.R.D Solutions
Parana Technologies
$7.262
A-Z Elektronik GmbH
Argo Parts USA
Alle Elektronik GmbH
Robosynatics
Lucentia Tech
Futuretech Components
Authorized Procurement Solutions
Epart123
$7.500
Glotronic Ltd.
Assy Fe
Schahn Electronic Components
Cyclops Electronics Ltd (Excess)
Motion Control ICs L6202 attributes and parameters. Explore more Motion Control ICs devices from Sprague Electric
JESD-30 Code:
JESD-609 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
L6202 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
3110-00-156-3542, 3110001563542, 6515-01-469-0004, 6515014690004
NIIN
001563542, 014690004
PCN Obsolescence/ EOL - L293E/L62xx/L6506 obs 14/Apr/2023
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV8702QRHBRQ1
Texas Instruments' DRV8702QRHBRQ1 is a Motion Control IC with 32 terminals, operating from -40 to 125 °C. It features a supply voltage range of 5.5-45 V and supports stepper motor control applications. The chip carrier package has a very thin profile, making it suitable for automotive use at up to 260C peak reflow temperature.
DRV8436RGER
DRV8436RGER by Texas Instruments is a Motion Control IC with 24 V nominal voltage, suitable for automotive applications. It features a max output current of 0.01 A and operates in a temperature range from -40 to 125 °C. This IC is designed as a stepper motor controller with surface mount packaging and quad terminal position.
IGCM15F60GAXKMA1
Infineon Technologies
IGCM15F60GAXKMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating voltage range of 14-18.5V, and max output current of 30A. It is designed for AC motor control applications in industrial settings, featuring a hybrid technology package style with a rectangular shape and through-hole terminal form.
STGIPQ5C60T-HL
STMicroelectronics
STMicroelectronics' STGIPQ5C60T-HL is a Motion Control IC with 26 terminals, operating b/w -40°C to 125°C. It features a nominal voltage range of 13.5V to 18V, making it ideal for automotive applications as an AC motor controller in hybrid technology.
MC34931EK
Freescale Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8821DCAR
DRV8821DCAR by Texas Instruments is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at a supply voltage range of 8-32V and can handle a max output current of 1.5A. This industrial-grade IC comes in a small outline package with gull wing terminals.
TLE94106ELXUMA1
TLE94106ELXUMA1 by Infineon Technologies is a motion control IC with 1 function. It operates at a nominal voltage of 5V and has a max output current of 2A. This IC is commonly used as a brush DC motor controller in industrial applications.
MC33035DW
Onsemi
MC33035DW by Onsemi is a small outline motion control IC for brushless DC motor control. It operates at 10-20V with max output current of 0.01A. With industrial temperature grade, it's ideal for applications requiring precise motor control in compact spaces.
STK984-190-E
STK984-190-E by Onsemi is a Motion Control IC with 24 terminals, operating voltage range of 8V to 18V. It is a Brushless DC Motor Controller suitable for automotive applications, featuring a temperature range from -40°C to 125°C and compact dimensions of 29.6mm x 18.2mm x 4.8mm.
LB11600JV-TLM-E
LB11600JV-TLM-E by Onsemi is a Motion Control IC with 30 terminals, operating at -40 to 100 °C. It has a supply voltage range of 4.5-14 V and output current of 0.04 A. Ideal for industrial applications requiring brushless DC motor control in compact spaces.
L6474PD
L6474PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating at 3.3V supply voltage and supporting up to 7A output current. It is a Stepper Motor Controller in a small outline package suitable for surface mount applications. The IC features NMOS technology, Gull Wing terminal form, and has a max supply voltage of 45V.
TMC262C-LA
Trinamic Motion Control & Kg
STEPPER MOTOR CONTROLLER; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Maximum Operating Temperature: 125 Cel;
LM628N-6/NOPB
National Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
A4983SETTR-T
Allegro MicroSystems
Allegro MicroSystems' A4983SETTR-T is a Motion Control IC with 35V supply voltage, 2.5A output current, and NMOS technology. Ideal for stepper motor control applications, this surface-mount chip carrier operates b/w -20°C to 85°C with a terminal pitch of 0.5mm.
DRV8424EPWPR
DRV8424EPWPR by Texas Instruments is a Motion Control IC with 28 terminals, operating at -40 to 125°C. It features a max output current of 2.5A and supports stepper motor control applications. This small outline IC has a package size of 9.7mm x 4.4mm x 1.2mm, making it suitable for automotive use with a supply voltage range of 0-5.5V.
L6234PD
STMicroelectronics L6234PD is a Motion Control IC with 20 terminals, operating voltage of 7-42V, and max output current of 5A. Ideal for automotive applications due to its BICMOS technology, it's a Brushless DC Motor Controller in small outline package suitable for surface mount assembly.
MP6619GQ-Z
Monolithic Power Systems
BRUSH DC MOTOR CONTROLLER;
TDA1085C
Motorola
UNIVERSAL MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
L6205N
STMicroelectronics L6205N is a Motion Control IC with 48V supply, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, it features a rectangular package style with 20 terminals in an in-line configuration. Operating from -40 to 150°C, this stepper motor controller suits various motion control needs.
STK681-332-E
Sanyo Semiconductor
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 19; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XZFM-T19; Maximum Supply Voltage (Vsup): 5.25 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L6206PD
STMicroelectronics L6206PD is a Motion Control IC with 36 terminals, operating voltage of 8-48V. It's a Stepper Motor Controller in small outline package suitable for automotive applications, with max output current of 5.6A and temp range -40 to 150°C.
L6205PD013TR
STMicroelectronics L6205PD013TR is a Motion Control IC with 48V Vsup, 5.6A output current, and BCDMOS technology. Ideal for automotive applications due to its -40 to 150 °C operating temperature range and small outline package style. It features dual terminals in a rectangular shape suitable for stepper motor control.
L6205PD
STMicroelectronics L6205PD is a Motion Control IC with 48V nominal voltage, 5.6A max output current, and BCDMOS technology. Ideal for automotive applications due to its small outline package and dual terminal position. Supports stepper motor control with a wide operating temperature range from -40°C to 150°C.
L6208D
L6208D by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage of 8-48V, and output current up to 5.6A. Ideal for automotive applications, this BCDMOS technology-based IC offers dual terminal position and small outline package style for stepper motor control.
L6206PD013TR
STMicroelectronics L6206PD013TR is a Motion Control IC with 36 terminals, operating voltage of 8-48V. It's a Stepper Motor Controller in small outline package for automotive applications, supporting max output current of 5.6A at temp range -40 to 150°C.
L6206QTR
STMicroelectronics L6206QTR is a Motion Control IC with 48 terminals in a square chip carrier package. Operating temperature ranges from -25 to 125 °C, supporting stepper motor control applications. Features DMOS technology, 8-52V supply voltage range, and compact dimensions of 7x7mm for versatile motion control solutions.
L6207PD013TR
STMicroelectronics L6207PD013TR is a Motion Control IC with 36 terminals, operating voltage of 8-52V. It features a max output current of 5.6A and BCDMOS technology. Ideal for automotive applications due to its small outline package and dual terminal position.
L6206Q
STMicroelectronics L6206Q is a Motion Control IC with 48 terminals in a square chip carrier package. Operating temperature ranges from -25 to 125°C, suitable for stepper motor control applications. Features include DMOS technology, 8-52V supply voltage range, and compact dimensions of 7x7mm.
L6208PD013TR
STMicroelectronics L6208PD013TR is a Motion Control IC with 36 terminals, operating voltage of 48V, and output current up to 5.6A. Ideal for automotive applications, it features BCDMOS technology, peak reflow temp of 245°C, and small outline package style.
L6208D013TR
STMicroelectronics L6208D013TR is a Motion Control IC with 48V supply voltage, 5.6A output current, and BCDMOS technology. Ideal for automotive applications due to its small outline package style, dual terminal position, and wide operating temperature range from -40°C to 150°C.
L6205D013TR
STMicroelectronics L6205D013TR is a Motion Control IC with 1 function, suitable for Stepper Motor Controllers. It operates b/w -40 to 150°C, with a supply voltage range of 8-52V and max output current of 5.6A. The package style is small outline, making it ideal for automotive applications.
L6205D
STMicroelectronics L6205D is a Motion Control IC with 48V nominal voltage, 5.6A max output current, and BCDMOS technology. Ideal for automotive applications due to its small outline package style and dual terminal position. Suitable for stepper motor control in various industrial settings.
L6206D
STMicroelectronics L6206D is a Motion Control IC with 24 terminals, operating voltage of 8-52V. It features BCDMOS technology, peak output current of 5.6A, and temp range -40 to 150°C. Ideal for automotive applications as a stepper motor controller in compact design with small outline package.
L6207PD
STMicroelectronics L6207PD is a Motion Control IC with 36 terminals, operating voltage of 8-48V. It's a Stepper Motor Controller in small outline package for automotive applications, supporting max output current of 2.8A at temp range -40 to 150°C.
L6206D013TR
L6206D013TR by STMicroelectronics is a Motion Control IC with 48V supply voltage, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, this stepper motor controller has a small outline package style and operates b/w -40°C to 150°C.
L6207D013TR
STMicroelectronics L6207D013TR is a Motion Control IC with 48V supply voltage, 5.6A output current, and BCDMOS technology. Ideal for automotive applications, it features a small outline package, dual terminals, and operates b/w -40 to 150°C.
L6208PD
L6208PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating voltage of 48V, and max output current of 5.6A. Ideal for automotive applications, this BCDMOS technology-based IC features a small outline package with a rectangular shape and gull wing terminals for precise stepper motor control.
L6207QTR
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
L6206N
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Sprague Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved