Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TB6674FAG
Toshiba
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STEPPER MOTOR CONTROLLER
R-PDSO-G16
8.2 mm
1
16
75 Cel
-30 Cel
.2 A
PLASTIC/EPOXY
SSOP
SOP16,.25,40
RECTANGULAR
SMALL OUTLINE, SHRINK PITCH
5,12
Not Qualified
1.9 mm
Motion Control Electronics
5 mA
5.5 V
4.5 V
5 V
YES
BCDMOS
COMMERCIAL EXTENDED
GULL WING
1 mm
DUAL
4.6 mm
SPMD150STP
STMicroelectronics
SPMD150STP by STMicroelectronics is a Motion Control IC with 24V Nominal Voltage, 2.5A Max Output Current, and -40 to 85 °C Operating Temperature Range. It is used as a Stepper Motor Controller in industrial applications requiring precise motion control within a compact 50.8mm square package.
S-XDMA-P19
50.8 mm
19
85 Cel
-40 Cel
2.5 A
UNSPECIFIED
MODULE,19LEAD,1.4
SQUARE
MICROELECTRONIC ASSEMBLY
NOT SPECIFIED
5,24
10 mA
42 V
10 V
24 V
NO
BIPOLAR
INDUSTRIAL
PIN/PEG
2.54 mm
DRV8804DWR
Texas Instruments
DRV8804DWR by Texas Instruments is a Motion Control IC with 4 functions, suitable for Stepper Motor Control. It operates at a supply voltage range of 8.2V to 24V and can handle a max output current of 1.5A. With a compact rectangular package style and dual terminal position, it is ideal for industrial applications requiring precise motion control.
R-PDSO-G20
e4
12.8 mm
2
4
20
1.5 A
SOP
SMALL OUTLINE
260
2.65 mm
2.1 mA
60 V
8.2 V
NICKEL PALLADIUM GOLD
1.27 mm
30
7.5 mm
DRV8805DW
Texas Instruments DRV8805DW is a Motion Control IC with 20 terminals, operating voltage range of 8.2-60V, and max output current of 0.02A. Ideal for industrial applications requiring precise stepper motor control in a compact rectangular package.
.02 A
SOP20,.4
8.2/60
DRV8804PWPR
DRV8804PWPR by Texas Instruments is a motion control IC with a supply voltage range of 8.2V to 24V, ideal for industrial applications. It features a max output current of 0.02A and operates in temperatures ranging from -40°C to 85°C. With a compact rectangular package style and surface-mount design, it offers dual-terminal position and nickel palladium gold finish for reliable performance in stepper motor control systems.
5 mm
3
HTSSOP
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
1.2 mm
.65 mm
4.4 mm
DRV8804PWP
DRV8804PWP by Texas Instruments is a Motion Control IC with 16 terminals and a supply voltage range of 8.2V to 60V. It operates in industrial temperatures from -40°C to 85°C, supporting a max output current of 0.02A for stepper motor control applications. The package is small outline, heat sink/slub, with gull wing terminals and a rectangular shape.
AMIS30421C4211G
Onsemi
AMIS30421C4211G by Onsemi is a Motion Control IC with 44 terminals in a square chip carrier package. It operates b/w -40 to 125 °C, suitable for automotive applications. Features include stepper motor control, 6-30V supply voltage range, and compact dimensions of 7x7mm.
S-XQCC-N44
7 mm
44
125 Cel
HVQCCN
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
.9 mm
30 V
6 V
AUTOMOTIVE
NO LEAD
.5 mm
QUAD
BD63843EFV-E2
ROHM
ROHM's BD63843EFV-E2 is a Motion Control IC with 24V supply, 1.5A output current, and -25 to 85°C operating range. Ideal for stepper motor control applications due to its compact size (9.7mm x 4.4mm), low power consumption (5mA max), and bipolar technology for precise motion control.
R-PDSO-G28
9.7 mm
28
-25 Cel
HVSSOP
TSSOP28,.25
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE, SHRINK PITCH
24
28 V
19 V
OTHER
HCTL-1101
Broadcom
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; Package Code: DIP; Maximum Seated Height: 4.83 mm; Length: 52.32 mm; Peak Reflow Temperature (C): 260;
52.32 mm
-20 Cel
DIP
4.83 mm
5.25 V
4.75 V
CMOS
15.24 mm
BD6389FM-E2
ROHM's BD6389FM-E2 is a Motion Control IC with 24V nominal voltage, 2.2A max output current, and bipolar technology. Ideal for stepper motor control applications due to its small outline package, dual terminal position, and commercial extended temperature grade suitability.
R-PDSO-G36
18.5 mm
36
2.2 A
SOP44,.4,32
2.4 mm
.8 mm
BD63874EFV-E2
ROHM's BD63874EFV-E2 is a Motion Control IC with 24V supply, 2A output current, and -25 to 85°C operating temperature range. Ideal for stepper motor control applications due to its compact size, dual terminal position, and bipolar technology.
2 A
BD6393FP-E2
BD6393FP-E2 by ROHM is a motion control IC with a supply voltage range of 16V to 28V. It features a max output current of 1.2A and operates in temperatures ranging from -25°C to 75°C. This IC is commonly used as a stepper motor controller in various applications.
R-PDSO-G25
13.6 mm
25
1.2 A
SOP32,.3,32
16 V
5.4 mm
NCV70522DQ004G
NCV70522DQ004G by Onsemi is a Motion Control IC with 36 terminals, operating at -40 to 125 °C. It features a Nominal Voltage of 12V, suitable for automotive applications. This Stepper Motor Controller has a compact rectangular package and supports surface mount installation.
10.3 mm
HSSOP
SSOP36,.4,20
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
5,6/30
12 mA
12 V
NICKEL GOLD PALLADIUM
TMC246A-PA
Trinamic Motion Control & Kg
TMC246A-PA by Trinamic: Motion Control IC for stepper motors. Nominal Vsup 3.3V, Max Isup 1.35mA, Max Output Current 7A. Ideal for automotive applications due to -40 to 125 °C operating temp range and HVCMOS technology.
ALSO REQUIRED BRIDGE SUPPLY VOLTAGE OF 7V TO 28.5V OR 7V TO 34V
S-PQFP-G44
e3
10 mm
7 A
LQFP
QFP44,.47SQ,32
FLATPACK, LOW PROFILE
3.3/5,7/34
1.6 mm
1.35 mA
3 V
3.3 V
HVCMOS
MATTE TIN
AMIS30532C5321G
AMIS30532C5321G by Onsemi is a Motion Control IC with 32 terminals, operating voltage range of 6-30V. It features a max output current of 1.6A and operates in automotive temperature grade (-40 to 125 °C). Ideal for stepper motor control applications due to its compact square package design and surface-mount capability.
S-XQCC-N32
32
1.6 A
AMIS30542C5421G
AMIS30542C5421G by Onsemi is a Motion Control IC with 32 terminals, operating voltage range of 6-30V. It features a max output current of 3.2A, suitable for automotive applications due to its wide temperature range (-40 to 125 °C) and compact square package design (7x7mm).
3.2 A
AMIS30543C5431RG
AMIS30543C5431RG by Onsemi is a Motion Control IC with 32 terminals, operating voltage of 6-30V, and output current of 3A. Ideal for automotive applications, it features a compact square package shape and operates in temperatures ranging from -40 to 125°C.
3 A
LCC32,.27SQ,25
DRV8823QDCARQ1
Texas Instruments' DRV8823QDCARQ1 is a Motion Control IC with 48 terminals, operating at -40 to 125 °C. It supports supply voltages from 8V to 32V, output current up to 1.5A, and is ideal for automotive applications due to AEC-Q100 screening level.
R-PDSO-G48
12.5 mm
48
TSSOP48,.3,20
8/32
AEC-Q100
8 mA
32 V
8 V
6.1 mm
L6480H
STMicroelectronics L6480H is a Motion Control IC with 38 terminals, operating at power supplies of 7.5V and 48V. It features a small outline package shape for stepper motor control applications, with surface mount capability and peak reflow temperature of 260°C.
R-PDSO-G38
38
TSSOP
TSSOP38,.25,20
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
7.5,48
TIN
LV8702V-MPB-H
LV8702V-MPB-H by Onsemi is a Motion Control IC with 24V supply, 3A output current, and BCDMOS technology. Ideal for stepper motor control applications in industrial settings due to its compact size, low profile design, and wide operating temperature range from -40 to 85 °C.
R-PDSO-G44
e6
15 mm
HLSSOP
SSOP44,.3
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH
1.7 mm
6.5 mA
9 V
TIN BISMUTH
5.6 mm
LV8702V-TLM-H
LV8702V-TLM-H by Onsemi is a Motion Control IC with 24V nominal voltage, 3A max output current, and BCDMOS technology. Ideal for industrial applications requiring precise stepper motor control in a compact rectangular package.
TLE4726GXUMA1
Infineon Technologies
TLE4726GXUMA1 by Infineon is a Motion Control IC for automotive applications. It operates at 5V with a max output current of 1A. With a temp range of -40 to 125°C, it's ideal for stepper motor control in compact designs.
R-PDSO-G24
15.6 mm
1 A
6.5 V
7.6 mm
TCA3727NKLA1
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
R-PDIP-T20
25.9 mm
IN-LINE
4.37 mm
THROUGH-HOLE
7.62 mm
TCA3727GXUMA1
TCA3727GXUMA1 by Infineon is a Motion Control IC for stepper motor control. It operates at 4.5-6.5V with a max output current of 1A. With a temp range of -40 to 125°C, it's ideal for automotive applications due to its bipolar technology and small outline package design.
TLE4729GXUMA1
STEPPER MOTOR CONTROLLER; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
NCV70501DW002G
Onsemi's NCV70501DW002G is a Motion Control IC with 16 terminals, operating voltage range of 6-29V, and max output current of 0.3A. Ideal for automotive applications due to its bipolar technology, it features a small outline package style and can withstand temperatures from -40 to 125 °C.
9.9 mm
.3 A
SOP16,.25
6/29
1.75 mm
15 mA
29 V
3.9 mm
NCV70501DW002R2G
NCV70501DW002R2G by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 6-29V, and output current of 0.3A. Ideal for automotive applications, this bipolar technology IC features a small outline package style and matte tin terminal finish.
NCV70624DW010G
NCV70624DW010G by Onsemi is a Motion Control IC with 20 terminals, operating at supply voltages of 5-29V. It features a max output current of 0.8A and is designed for stepper motor control applications. The package style is small outline, making it suitable for compact designs requiring precise motion control.
12.7762 mm
.8 A
5,6.5/29
2.6416 mm
14 V
7.5184 mm
NCV70624DW010R2G
NCV70624DW010R2G by Onsemi is a motion control IC with a rectangular package shape and small outline style. It operates at a nominal voltage of 14V and has a max output current of 0.8A. This IC is commonly used as a stepper motor controller in various applications.
NCV70627DQ001G
NCV70627DQ001G by Onsemi is a Motion Control IC with 36 terminals, operating at supply voltages from 5.5V to 29V. It features a max output current of 0.8A and is designed for stepper motor control applications. The package style is small outline with a heat sink, suitable for surface mount assembly in various electronic devices.
5.5/29
7 V
NCV70627DQ001R2G
NCV70627DQ001R2G by Onsemi is a Motion Control IC with 36 terminals, operating at a supply voltage range of 5.5V to 29V. It features a max output current of 0.8A and is designed for stepper motor control applications. The package style is small outline with heat sink, making it suitable for compact designs requiring precise motion control.
LV8731V-MPB-H
LV8731V-MPB-H by Onsemi is a Motion Control IC with 24V supply, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package, low profile design, and dual terminal position. Operating temperature ranges from -20 °C to 85°C making it suitable for various industrial environments.
LV8731V-TLM-H
LV8731V-TLM-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package, dual terminal position, and low profile design. Operating temperature range from -20 °C to 85°C makes it versatile for various industrial uses.
LV8732V-MPB-H
LV8732V-MPB-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package, dual terminal position, and peak reflow temperature of 260 °C.
LV8734V-MPB-H
LV8734V-MPB-H by Onsemi is a Motion Control IC with 44 terminals, operating at -40 to 85 °C. It has a supply voltage range of 9-32 V and output current up to 1.75 A, suitable for industrial stepper motor control applications. The package is small outline, low profile, with gull wing terminals and BCDMOS technology.
1.75 A
LV8741V-TLM-E
LV8741V-TLM-E by Onsemi is a Motion Control IC with 44 terminals, operating at -20 to 85 °C. It features a max output current of 1.75A and BICMOS technology for stepper motor control applications. The package style is small outline, low profile, with a shrink pitch design suitable for surface mount assembly.
ALSO OPERATES WITH THE RANGE OF 9.5V TO 35V SUPPLY
2.7 V
BICMOS
LV8414CS-NTE-L-H
LV8414CS-NTE-L-H by Onsemi is a Motion Control IC with 32 terminals, operating at 3.3V and 5V. It features BICMOS technology, 0.6A output current, and a compact square package ideal for stepper motor control applications.
S-PBGA-B32
e1
2.47 mm
.6 A
VFBGA
BGA32,6X6,16
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
3.3,5
3 mA
2.5 V
TIN SILVER COPPER
BALL
.4 mm
BOTTOM
LV8414CS-TE-L-H
LV8414CS-TE-L-H by Onsemi is a Motion Control IC with 32 terminals, operating voltage range of 2.5V to 5.5V, and max output current of 0.6A. Ideal for stepper motor control applications due to its BICMOS technology and compact square package design with very thin profile and fine pitch grid array style.
Tin/Silver/Copper (Sn/Ag/Cu)
DRV8812RHDT
DRV8812RHDT by Texas Instruments is a Motion Control IC with 24V nominal voltage and 1.6A max output current. Ideal for stepper motor control applications, it features a compact square package shape, operates in industrial temperature range (-40 to 85 °C), and supports surface mount installation.
S-PQCC-N28
LCC28,.2SQ,20
45 V
Nickel/Palladium/Gold (Ni/Pd/Au)
LB1936V-MPB-E
LB1936V-MPB-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 2.5-9.5 V, and peak reflow temp of 260 °C. Ideal for stepper motor control applications due to its compact size, low profile design, and bipolar technology ensuring precise motion control.
5.2 mm
LSSOP
SSOP16,.25
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
5
1.5 mm
16 mA
9.5 V
LB1936V-TLM-E
LB1936V-TLM-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 2.5-9.5 V, and peak reflow temp of 260°C. Ideal for stepper motor control applications due to its small outline package and low profile design.
STK672-440BN-E
STK672-440BN-E by Onsemi is a Motion Control IC with 19 terminals, 5V nominal voltage, and 20A max output current. It is a Stepper Motor Controller in an IN-LINE package style suitable for applications requiring precise motion control in compact spaces.
ALSO OPERATES IN 0 TO 46V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
R-PZIP-T19
29.2 mm
20 A
HSZIP
IN-LINE, HEAT SINK/SLUG, SHRINK PITCH
18.2 mm
HYBRID
Matte Tin (Sn) - annealed
ZIG-ZAG
4.5 mm
STK672-442BN-E
STK672-442BN-E by Onsemi is a Motion Control IC with 19 terminals, operating at 5V. It features a max output current of 20A and uses HYBRID technology. Ideal for STEPPER MOTOR CONTROL applications due to its flange mount package style and zig-zag terminal position.
ALSO OPERATES IN 0 TO 46V SUPPLY
R-XZFM-T19
FLANGE MOUNT
STK682-010-E
STK682-010-E by Onsemi is a Motion Control IC with 3A max output current, suitable for Stepper Motor Control. It features 19 terminals in an IN-LINE package style, measuring 29.2mm x 4.5mm x 18.2mm (LxWxH). The HYBRID technology and terminal finish of Matte Tin make it ideal for various motion control applications.
ALSO OPERATES WITH THE RANGE OF 9V TO 32V SUPPLY, SEATED HT-CALCULATED
0 V
TMC223-SI
TMC223-SI by Trinamic is a small outline motion control IC for stepper motors. With 20 terminals, it operates b/w -40 to 125 °C and supports up to 0.8A output current. Ideal for automotive applications due to its matte tin finish and gull wing terminal form.
LB1940T-MPB-E
LB1940T-MPB-E by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 1.9-7.5V, and output current of 0.4A. Ideal for stepper motor control applications due to its compact size, low supply current of 7mA, and bipolar technology for precise motion control.
ALSO OPERATES WITH THE RANGE OF 1.9V TO 6.5V SUPPLY
6.5 mm
.4 A
TSSOP20,.25
3,5
7 mA
7.5 V
1.9 V
LV8415XA-MH
LV8415XA-MH by Onsemi is a Motion Control IC with 32 terminals, operating voltage of 2.7-5.5V, and max output current of 0.6A. Ideal for stepper motor control applications due to its BICMOS technology and compact GRID ARRAY package style. Operating temp range: -20 to 85 °C makes it versatile for various environments.
.69 mm
STK672-430AN-E
STEPPER MOTOR CONTROLLER; No. of Terminals: 19; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
ALSO OPERATES IN 0 TO 42V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
10 A
© 2023 All rights reserved
