Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
IDEA Electronic Components Group
$0.477
$0.429
MKK Technologies
$0.896
DigiPath Technology Company
Corphita
Parana Technologies
$0.570
RF Power Field Effect Transistors (FET) LET9180 attributes and parameters. Explore more RF Power Field Effect Transistors (FET) devices from STMicroelectronics
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
LET9180 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
EU2B-YS3203C
Idec
ROTARY SWITCH;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
Silicon Standard
Fairchild Semiconductor
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
RF5L05950CF2
STMicroelectronics
RF Power Field-Effect Transistors; Terminal Finish: Nickel/Gold/Cobalt (Ni/Au/Co); Moisture Sensitivity Level (MSL): 3;
TIM3742-8UL
Toshiba
Toshiba's TIM3742-8UL is an N-channel RF Power FET with a 15V DS breakdown voltage, ideal for amplifier applications in the C band. Featuring a single configuration, it has a max drain current of 7A and operates in depletion mode. With a package style of flange mount and metal-oxide semiconductor technology, it offers high power dissipation up to 37.5W at a max temp of 175°C.
AFT09MS031GNR1
NXP Semiconductors
AFT09MS031GNR1 by NXP Semiconductors is an N-CHANNEL RF Power FET with 317W power dissipation, suitable for surface mount applications. It operates at a max temp of 150°C and features metal-oxide semiconductor technology. Ideal for high-power RF amplifiers in various electronic devices.
A3G26H501W17SR3
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Minimum DS Breakdown Voltage: 150 V; Terminal Position: QUAD; Highest Frequency Band: S BAND;
MRFE6VP5150GNR1
Freescale Semiconductor
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND; Transistor Application: AMPLIFIER; No. of Elements: 2;
934065978112
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Transistor Application: AMPLIFIER; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Terminals: 4;
SD2943W
SD2943W by STMicroelectronics is an N-CHANNEL RF Power FET with 40A max drain current and 648W max power dissipation. Ideal for high-power applications, it operates at up to 200°C and features metal-oxide semiconductor technology.
PD85025TR-E
PD85025TR-E by STMicroelectronics is an N-channel RF power FET designed for amplifier applications. It features a max drain current of 7 A, a breakdown voltage of 40 V, and operates in the ultra-high frequency band. This compact surface mount transistor ensures efficient performance up to 165 °C.
PD84008L-E
PD84008L-E by STMicroelectronics is an N-channel RF power FET designed for amplification in ultra-high frequency applications. It features a max drain current of 7 A, a breakdown voltage of 25 V, and operates at up to 150 °C. This surface-mount transistor ensures efficient performance in compact designs.
FLU35XM
Sumitomo Electric Industries
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Additional Features: HIGH RELIABILITY; Highest Frequency Band: L BAND; Minimum DS Breakdown Voltage: 15 V;
BLF246B
The NXP Semiconductors BLF246B is an RF Power FET with 65V DS breakdown voltage and 14dB min power gain. It operates in the VHF band, has a max drain current of 8A, and a package style of flange mount. Commonly used as an amplifier in very high-frequency applications.
934061129118
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 2; Transistor Application: AMPLIFIER; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
934064635118
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Terminal Form: FLAT; JESD-30 Code: R-CDFP-F4; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
PD85015STR-E
PD85015STR-E by STMicroelectronics is an N-channel RF power FET designed for amplifier applications. It features a max drain current of 5 A, a breakdown voltage of 40 V, and operates in the ultra-high frequency band. This surface-mount transistor ensures efficient performance with a max power dissipation of 59 W.
934061172112
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE; Terminal Form: FLAT;
MRF6V2150NR1
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 110 V; Qualification: Not Qualified;
PD85004
STMicroelectronics PD85004 is an N-CHANNEL RF Power FET with 40V DS Breakdown Voltage and 2A Drain Current. It operates in the Ultra High Frequency Band, suitable for amplifier applications. The transistor features a plastic/epoxy package, flat terminals, and can handle up to 6W power dissipation at 150°C.
SD3931-10
SD3931-10 by STMicroelectronics is an N-channel RF power FET designed for high-frequency applications. It features a max drain current of 10 A, a breakdown voltage of 250 V, and operates at temperatures up to 200 °C. Ideal for enhancing performance in demanding RF circuits.
934065908112
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Transistor Application: AMPLIFIER; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
934056498112
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Minimum DS Breakdown Voltage: 65 V; Maximum Drain Current (ID): 18 A; Qualification: Not Qualified;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LET9045STR
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 160 W; Transistor Element Material: SILICON; No. of Elements: 1;
LET9045F
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 108 W; Peak Reflow Temperature (C): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LET9120M
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 217 W; Minimum DS Breakdown Voltage: 80 V; Qualification: Not Qualified;
LET9060F
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 130 W; JESD-30 Code: R-PDFP-F2; Terminal Form: FLAT;
LET9085
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 186 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Form: FLAT;
LET9060
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Minimum DS Breakdown Voltage: 80 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
LET9130
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 217 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
LET9006
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 16 W; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND; Package Style (Meter): CHIP CARRIER;
LET9045S
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 160 W; Maximum Drain Current (Abs) (ID): 5 A; JESD-609 Code: e3;
LET9060S
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Case Connection: SOURCE; Qualification: Not Qualified;
LET9060STR
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Peak Reflow Temperature (C): 250; JESD-609 Code: e3;
LET9070FB
RF Power Field-Effect Transistors; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
LET9045TR
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 79 W; Transistor Application: AMPLIFIER; No. of Elements: 1;
LET9120
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 200 W; Package Shape: RECTANGULAR; Case Connection: SOURCE;
LET9045C
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 108 W; Terminal Position: DUAL; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LET9060C
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 118 W; Terminal Position: DUAL; Transistor Application: AMPLIFIER;
LET9002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 4 W; Additional Features: HIGH RELIABILITY; Transistor Element Material: SILICON;
LET9045
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 79 W; Operating Mode: ENHANCEMENT MODE; Transistor Element Material: SILICON;
LET9060TR
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Package Shape: RECTANGULAR; No. of Elements: 1;
LET9070CB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved