Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SCR; Surface Mount: NO; Non Repetitive Peak On-state Current: 60 A; Maximum Operating Temperature: 125 Cel; Repetitive Peak Off-state Voltage: 250 V; Maximum DC Gate Trigger Current: 15 mA;
Median Price
$35.130
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
American Microsemiconductor Inc.
Vyrian
Anansix
Digiode
Bristol Electronics
DigiKey Marketplace
Electronic Expediters
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
PC Components Company LLC
IDEA Electronic Components Group
$3.712
$3.341
ChromeModa Solutions
$4.212
$3.454
DigiPath Technology Company
$6.981
MKK Technologies
Microchip USA
$19.460
Corphita
Glotronic Ltd.
Parana Technologies
$4.438
Northwest PG Solutions
Native Components
Silicon Controlled Rectifiers (SCR) 2N1775 attributes and parameters. Explore more Silicon Controlled Rectifiers (SCR) devices from STMicroelectronics
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
Maximum Leakage Current:
Non Repetitive Peak On-state Current:
Maximum On-state Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Trigger Device Type:
2N1775 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
Littelfuse
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
BT151-500RT,127
Ween Semiconductors
SCR; Surface Mount: NO; Maximum On-state Current: 8 A; Maximum On-state Voltage: 1.75 V; Maximum DC Gate Trigger Voltage: 1.5 V; Non Repetitive Peak On-state Current: 132 A;
C159P
Powerex
SCR; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; Repetitive Peak Off-state Voltage: 1000 V; Maximum On-state Current: 110 A; Minimum Critical Rate of Rise of Off-state Voltage: 200 V/us;
TIC39D
TIC39D by Texas Instruments is a single SCR with a max on-state current of 2A and non-repetitive peak on-state current of 20A. It has a trigger voltage of 1V, making it suitable for applications requiring precise gate triggering in circuits with up to 400V RMS on-state current.
2N1599
Semitronics
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Body Material: METAL;
NTE5546
Nte Electronics
NTE5546 by Nte Electronics is a single SCR with 35A max on-state current, 300A non-repetitive peak current, and 500V repetitive peak reverse voltage. It is used in applications requiring high power control like industrial motor drives and lighting systems.
P131
Vishay Semiconductors
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: BRIDGE; Case Connection: ISOLATED;
MCD162-16IO1
IXYS Corporation
SCR; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE WITH BUILT-IN SERIES DIODE; Case Connection: ISOLATED;
BTW69600
BTW69600 by STMicroelectronics is a single silicon controlled rectifier (SCR) with a max on-state current of 25A and a repetitive peak reverse voltage of 600V. It is commonly used in applications requiring high power switching, such as motor control and lighting systems.
2N1916
SCR; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Maximum RMS On-state Current: 110 A;
S6055RTP
The Littelfuse S6055RTP is a single SCR with max on-state current of 35A and non-repetitive peak on-state current of 650A. It has a max DC gate trigger current of 40mA, making it suitable for applications requiring high power switching capabilities in industrial settings.
TCR22-6
New Jersey Semiconductor Products
SCR; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Form: WIRE;
2N690
SCR; Package Style (Meter): POST/STUD MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ANODE;
TD320N18SOFHPSA1
Infineon Technologies
Infineon's TD320N18SOFHPSA1 SCR has 1800V repetitive peak reverse voltage, 520A max RMS on-state current, and 150mA DC gate trigger current. Ideal for applications requiring high power control in industrial settings with temperatures ranging from -40°C to 130°C.
TIC46
TIC46 by Texas Instruments is a single SCR with max. DC gate trigger current of 0.2mA and non-repetitive peak on-state current of 6A. It has a package style of cylindrical, suitable for applications requiring high reliability in controlling AC power circuits.
TIC126A
TIC126A by Texas Instruments is a single SCR with max. on-state current of 12A, trigger voltage of 1.5V, and DC gate trigger current of 20mA. It is used in applications requiring high power control such as motor drives and lighting systems due to its max. operating temp. of 110°C and non-repetitive peak on-state current of 100A.
The Littelfuse MCD162-16IO1 SCR has a max DC gate trigger current of 150mA, non-repetitive peak on-state current of 6000A, and max repetitive peak reverse voltage of 1600V. Ideal for applications requiring high current switching capabilities in industrial equipment or power control systems.
VVZ40-16IO1
VVZ40-16IO1 by Littelfuse is a 3-phase SCR with max DC gate trigger current of 65mA, non-repetitive peak on-state current of 350A, and max repetitive peak reverse voltage of 1600V. Ideal for applications requiring high power control in industrial settings.
SKCH28/12
Semikron International
SKCH28/12 by Semikron International is a BRIDGE, HALF-CONTROLLED SCR with 320A Non Repetitive Peak On-state Current. It has a Max On-state Current of 28A and operates at temperatures from -40 to 125 °C. Ideal for applications requiring high current rectification in industrial settings.
2N881
2N881 by Texas Instruments is a Silicon Controlled Rectifier with 0.2 mA DC Gate Trigger Current, 20 A Non Repetitive Peak On-state Current, and 0.35 A Max On-state Current. It operates b/w -60 to 100 °C and has a max Off-state Voltage of 200 V. Ideal for power control applications requiring precise current regulation.
N3790TJ280
Silicon Controlled Rectifiers;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2N1772
SCR; Surface Mount: NO; Maximum Leakage Current: 9 mA; Maximum DC Gate Trigger Current: 15 mA; Maximum Operating Temperature: 125 Cel; Repetitive Peak Off-state Voltage: 100 V;
2N1775A
SCR; Surface Mount: NO; Maximum Operating Temperature: 155 Cel; Maximum DC Gate Trigger Current: 15 mA; Maximum On-state Current: 4.7 A; Repetitive Peak Off-state Voltage: 250 V;
2N1776B
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 300 V; Maximum DC Gate Trigger Current: 30 mA; Maximum Holding Current: 80 mA; Maximum DC Gate Trigger Voltage: 2 V;
2N1774
SCR; Surface Mount: NO; Maximum Leakage Current: 6 mA; Maximum Holding Current: 50 mA; Maximum On-state Current: 4.7 A; Repetitive Peak Off-state Voltage: 200 V;
2N1773
SCR; Surface Mount: NO; Maximum Holding Current: 50 mA; Maximum DC Gate Trigger Voltage: 1.5 V; Minimum Operating Temperature: -65 Cel; Maximum On-state Current: 4.7 A;
2N1775
SCR; Surface Mount: NO; Maximum Leakage Current: 5 mA; Maximum Operating Temperature: 125 Cel; Repetitive Peak Off-state Voltage: 250 V; Maximum DC Gate Trigger Current: 15 mA;
2N1776A
SCR; Surface Mount: NO; Maximum DC Gate Trigger Current: 15 mA; Maximum On-state Current: 4.7 A; Maximum Holding Current: 50 mA; Maximum Leakage Current: 4 mA;
2N1778
SCR; Surface Mount: NO; Non Repetitive Peak On-state Current: 60 A; Repetitive Peak Off-state Voltage: 500 V; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Current: 30 mA;
2N1772A
SCR; Surface Mount: NO; Minimum Operating Temperature: -65 Cel; Non Repetitive Peak On-state Current: 60 A; Maximum Holding Current: 50 mA; Maximum DC Gate Trigger Current: 15 mA;
2N1770A
SCR; Surface Mount: NO; Maximum DC Gate Trigger Current: 15 mA; Maximum Leakage Current: 9 mA; Maximum Operating Temperature: 155 Cel; Maximum DC Gate Trigger Voltage: 1.5 V;
2N1771
SCR; Surface Mount: NO; Maximum RMS On-state Current: 7.4 A; Maximum Leakage Current: 9 mA; Qualification: Not Qualified; Minimum Operating Temperature: -65 Cel;
2N1771A
SCR; Surface Mount: NO; Repetitive Peak Off-state Voltage: 50 V; Maximum Holding Current: 50 mA; Non Repetitive Peak On-state Current: 60 A; Maximum Operating Temperature: 155 Cel;
2N1777
SCR; Surface Mount: NO; Maximum Leakage Current: 2 mA; Maximum Holding Current: 50 mA; Maximum On-state Current: 4.7 A; Minimum Operating Temperature: -65 Cel;
2N1774A
SCR; Surface Mount: NO; Maximum On-state Current: 4.7 A; Minimum Operating Temperature: -65 Cel; Maximum Leakage Current: 6 mA; Maximum Holding Current: 50 mA;
2N1777A
SCR; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 1.5 V; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature: 155 Cel; Maximum On-state Current: 4.7 A;
2N1776
SCR; Surface Mount: NO; Non Repetitive Peak On-state Current: 60 A; Repetitive Peak Off-state Voltage: 300 V; Maximum DC Gate Trigger Current: 15 mA; Maximum Leakage Current: 4 mA;
2N1770
SCR; Surface Mount: NO; Non Repetitive Peak On-state Current: 60 A; Maximum On-state Current: 4.7 A; Minimum Critical Rate of Rise of Off-state Voltage: 200 V/us; Repetitive Peak Off-state Voltage: 25 V;
2N1773A
SCR; Surface Mount: NO; Maximum DC Gate Trigger Current: 15 mA; Maximum On-state Current: 4.7 A; Maximum Holding Current: 50 mA; Minimum Operating Temperature: -65 Cel;
Central Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved