Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTMFS4849NT1G by Onsemi is a N-CHANNEL FET with 30V DS Breakdown Voltage and 71A Drain Current. Ideal for SWITCHING applications, it features 0.0079 ohm RDS(ON) and 42.4W Power Dissipation in a SMALL OUTLINE package.
Median Price
$0.404
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.396
1k+ parts
$0.329
10k+ parts
$0.293
Verical
$0.411
$0.367
Digiode
$0.309
Chip Stock
Vyrian
Corphita
$0.292
Corohmni
$0.325
Component Stockers USA
$0.340
$0.320
$0.290
AZTECH Wire
$8.980
Continental Prestige Electronics
$0.298
A-Z Elektronik GmbH
Problanco Electronics
SupplyDigital Components
Perfect Parts
Kulean Microsystems
TANS Electronics
Authorized Procurement Solutions
RC Electronics
GreenTree Electronics
UHIMA Technologies
The plastic/epoxy package body material provides durability and protection for the transistor, making it suitable for various applications.
N-channel transistors typically have better conductivity and performance compared to P-channel transistors, making this transistor a good choice for switching applications.
The built-in diode allows for better control over the flow of current, making this transistor ideal for switching applications where precise current regulation is required.
Designed specifically for switching applications, this transistor offers efficient and reliable performance in controlling electrical circuits.
Being surface mountable, this transistor is easy to integrate onto circuit boards, saving space and simplifying the manufacturing process.
With a high maximum drain current capability of 71A, this transistor can handle demanding applications that require high current loads.
With a high maximum power dissipation rating, this transistor can effectively dissipate heat, ensuring reliable performance under high-power conditions.
The high maximum operating temperature of 150 °C allows this transistor to operate in harsh environments with elevated temperatures.
Small Signal Field Effect Transistors (FET) NTMFS4849NT1G attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
NTMFS4849NT1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Multiple Devices 07/Jul/2010
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Renesas Electronics
BC548B
NPN; Configuration: SINGLE; Surface Mount: NO; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
BSS123L
Onsemi
BSS123L by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A ID, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode. This small outline transistor in gull wing package is designed for surface mount technology.
BS170
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Operating Mode: ENHANCEMENT MODE; Terminal Finish: TIN LEAD;
2N7002T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Package Style (Meter): SMALL OUTLINE;
BSS123_R1_00001
Panjit International
Panjit International's BSS123_R1_00001 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A ID, and 6 ohm RDS. Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode, this MOSFET has GULL WING terminals and matte tin finish.
FDC6305N
FDC6305N by Onsemi is a N-CHANNEL FET with 2 elements and built-in diode, ideal for SWITCHING applications. It features a Max Drain Current of 2.7A, Max Power Dissipation of 0.96W, and Max Operating Temperature of 150°C. This small outline transistor has a rectangular package and operates in ENHANCEMENT MODE.
BSP171PH6327XTSA1
Infineon Technologies
BSP171PH6327XTSA1 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage and 1.9A max drain current. Ideal for small outline applications, it features a built-in diode, 0.3 ohm RDS(on), and operates in enhancement mode up to 150°C.
BSS123
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Drain Current (ID): .2 A; No. of Terminals: 3;
BSS84PH6433XTMA1
BSS84PH6433XTMA1 by Infineon is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 0.17A Drain Current, 8 ohm On Resistance, and operates at up to 150°C. This SMALL OUTLINE transistor has METAL-OXIDE SEMICONDUCTOR tech and meets AEC-Q101 standards for automotive use.
IRLML2803GTRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .54 W; Terminal Finish: MATTE TIN; JEDEC-95 Code: TO-236AB;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 3; No. of Elements: 1; Maximum Drain Current (ID): .115 A;
ZXMN10A07FTA
Diodes Incorporated
ZXMN10A07FTA by Diodes Inc. is a N-CHANNEL FET with 100V DS breakdown voltage, 0.56A max drain current, and 0.7 ohm max on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.806W. The transistor features a small outline package style and can withstand temperatures up to 150°C.
NDS355AN-F169
Small Signal Field-Effect Transistors;
SI4401DDY-T1-GE3
Vishay Intertechnology
SI4401DDY-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET with 40V DS Breakdown Voltage, 16.1A Drain Current, and 0.015 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at up to 150°C with GULL WING terminals in a RECTANGULAR package.
2N7002BKV
NXP Semiconductors' 2N7002BKV is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 2 ELEMENTS WITH BUILT-IN DIODE in a SMALL OUTLINE package, operating from -55 to 150 °C. Max ID of 0.34A and RDS(on) of 1.6 ohm make it suitable for various electronic designs.
PMV65XP,215
PMV65XP,215 by NXP Semiconductors is a P-CHANNEL FET with 20V DS Breakdown Voltage and 3.9A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 0.076 ohm On Resistance. Package: PLASTIC/EPOXY, GULL WING terminals, and can handle up to 150°C temperature.
2N7002K
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Terminal Position: DUAL; Package Style (Meter): SMALL OUTLINE; Minimum DS Breakdown Voltage: 60 V;
2N7000
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; JESD-30 Code: O-PBCY-T3; Maximum Operating Temperature: 150 Cel;
BSS138AKAR
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
SI2302CDS-T1-E3
Vishay Intertechnology's SI2302CDS-T1-E3 is a N-CHANNEL FET with 20V DS Breakdown Voltage and 2.6A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 0.057 ohm On Resistance, and operates in ENHANCEMENT MODE at up to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTMFS4C10NT3G
NTMFS4C10NT3G by Onsemi is a N-CHANNEL FET with 46A max drain current and 23.6W power dissipation. Ideal for high-power applications, it operates at up to 150°C and features surface mount configuration for easy installation.
NTMFS4C10NT1G-001
NTMFS4C10NT1G-001 by Onsemi is a N-CHANNEL FET with 46A max drain current and 23.6W power dissipation. Ideal for high-power applications, it operates up to 150°C, making it suitable for various surface-mount designs.
NTMFS4707N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 6.9 A; Case Connection: DRAIN; No. of Elements: 1;
NTMFS006N12MC
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 40; No. of Terminals: 5; Package Body Material: PLASTIC/EPOXY;
NTMFS4120NT3G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6.9 W; Maximum Drain-Source On Resistance: .0045 ohm; No. of Terminals: 5;
NTMFS4701NT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Peak Reflow Temperature (C): 260; Maximum Drain Current (ID): 7.7 A;
NTMFS4119NT3G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6.1 W; Transistor Application: SWITCHING; Operating Mode: ENHANCEMENT MODE;
NTMFS4707NT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6.25 W; Peak Reflow Temperature (C): 260; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NTMFD1D4N02P1E
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Minimum Operating Temperature: -55 Cel; Package Style (Meter): SMALL OUTLINE;
NTMFS4121NT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6.6 W; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
NTMFS008N12MC
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
NTMFS4121NT3G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6.6 W; Terminal Position: DUAL; Terminal Form: FLAT;
NTMFS4701NR2
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Transistor Element Material: SILICON; JESD-30 Code: R-PDSO-F8;
NTMFS4119NT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6.1 W; Terminal Position: DUAL; Moisture Sensitivity Level (MSL): 1;
NTMFS4701NT3G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Minimum DS Breakdown Voltage: 30 V; No. of Terminals: 5;
NTMFS005P03P8ZT1G
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Maximum Feedback Capacitance (Crss): 2550 pF; Maximum Drain-Source On Resistance: .0027 ohm;
NTMFS4122NT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 5.8 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Minimum DS Breakdown Voltage: 30 V;
NTMFS4120NT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6.9 W; Operating Mode: ENHANCEMENT MODE; Peak Reflow Temperature (C): 260;
NTMFD1D1N02X
NTMFD4C20NT3G
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.88 W; Case Connection: DRAIN SOURCE; Maximum Time At Peak Reflow Temperature (s): 30;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved