Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTD80N02-1G by Onsemi is a Power FET with 80A max drain current, 0.0058 ohm on-resistance, and 24V min breakdown voltage. Ideal for switching applications due to its N-channel configuration and built-in diode. Suitable for use in enhancement mode operation at up to 150 °C temperature.
Median Price
$0.317
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.263
10k+ parts
$0.235
DigiKey
$0.400
Verical
$0.293
Digiode
$0.247
Vyrian
$0.260
Chip Stock
Inventory MP
Bristol Electronics
Prism Electronics
Corphita
$0.234
Component Stockers USA
$0.250
$0.220
Corohmni
Continental Prestige Electronics
$0.238
Kepictronics
SupplyDigital Components
Kulean Microsystems
A-Z Elektronik GmbH
Problanco Electronics
TANS Electronics
Authorized Procurement Solutions
UHIMA Technologies
Perfect Parts
GreenTree Electronics
Provides good insulation and protection for the transistor, ensuring reliability and durability in various operating conditions.
N-channel FETs typically have better performance and lower resistance compared to P-channel types, making them ideal for switching applications.
The built-in diode allows for protection against reverse current flow, increasing the overall efficiency and safety of the switching operation.
Specifically designed for switching applications, ensuring optimal performance and reliability in controlling power flow.
With a high breakdown voltage, this FET can handle higher voltages without breakdown, making it suitable for a wide range of applications.
Enhancement mode FETs offer better control and efficiency in switching operations, providing precise power management.
Capable of handling high current loads during pulsed operation, making it suitable for applications requiring high power output.
With a high avalanche energy rating, this FET can withstand high-energy pulses without damage, ensuring long-term reliability.
Capable of handling high continuous current flow, making it suitable for applications that require sustained power delivery.
With a high power dissipation rating, this FET can handle high power levels without overheating, ensuring stable operation.
MOSFET technology offers high switching speeds and low on-resistance, providing efficient power management and control.
Capable of operating at high temperatures without performance degradation, making it suitable for demanding environments.
Low on-resistance minimizes power loss and heat generation, improving efficiency and overall performance.
Power Field Effect Transistors (FET) NTD80N02-1G attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
NTD80N02-1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
PCN Obsolescence/ EOL - Multiple Devices 14/Apr/2010
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Excel (Suzhou) Semiconductor
FQA36P15
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 294 W; Minimum DS Breakdown Voltage: 150 V; Qualification: Not Qualified;
FDC658AP-G
Power Field-Effect Transistors; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
IRLML2502
International Rectifier
IRLML2502 by International Rectifier is a N-CHANNEL FET with 20V DS breakdown voltage and 4.2A max drain current, ideal for switching applications. It features a built-in diode, operates in enhancement mode, and has a max power dissipation of 1.3W. This MOSFET is surface mountable with GULL WING terminals and can handle up to 33A pulsed drain current.
SUM110P06-07L-E3
Vishay Intertechnology
SUM110P06-07L-E3 by Vishay Intertechnology is a P-channel power FET with a min DS breakdown voltage of 60V. It has a max pulsed drain current of 240A and an avalanche energy rating of 281mJ. This transistor is commonly used for switching applications in electronic circuits.
FDS8984_F085
FDS8984_F085 by Fairchild Semiconductor is a N-CHANNEL Power FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 2 ELEMENTS WITH BUILT-IN DIODE, 30A Max Pulsed Drain Current, and 0.023 ohm Max Drain-Source On Resistance. Suitable for surface mount with GULL WING terminals in a SMALL OUTLINE package style.
SQM40P10-40L_GE3
The Vishay Intertechnology SQM40P10-40L_GE3 is a P-channel power FET with 100V DS breakdown voltage and 160A max pulsed drain current. Ideal for applications requiring high power handling, such as motor control systems or power supplies. Features include a built-in diode, 0.04 ohm max RDS(on), and small outline package style.
FDD6637
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 57 W; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
2N7002K
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Maximum Drain Current (Abs) (ID): .34 A; Operating Mode: ENHANCEMENT MODE;
FQB22P10TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; No. of Elements: 1; Terminal Finish: MATTE TIN;
IRFR120NTRPBF
Infineon Technologies
IRFR120NTRPBF by Infineon Technologies is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 38A Pulsed Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 0.21 ohm On Resistance, and operates in ENHANCEMENT MODE.
NVMFS5113PLT1G
NVMFS5113PLT1G by Onsemi is a P-CHANNEL power FET with a min DS breakdown voltage of 60V. It has a max pulsed drain current of 415A and an avalanche energy rating of 315mJ. This transistor is commonly used in automotive applications due to its AEC-Q101 reference standard and moisture sensitivity level of MSL1.
CSD18563Q5AT
CSD18563Q5AT by Texas Instruments is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 96A IDM and 146mJ EAS, operating in the -55 to 150 °C temperature range. This SINGLE transistor has a 0.0108 ohm Drain-Source Resistance and comes in a SMALL OUTLINE package style.
SUD50P04-08-GE3
Vishay Intertechnology's SUD50P04-08-GE3 is a P-channel power FET with 40V DS breakdown voltage and 50A max drain current. Ideal for switching applications, it features a built-in diode, operates in enhancement mode, and has a max power dissipation of 73.5W.
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
IRFR5505TRPBF
IRFR5505TRPBF by Infineon is a P-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 64A IDM, 150mJ EAS, and 0.11 ohm RDS(ON). With a max power dissipation of 57W and operating temperature up to 150°C, it's suitable for high-power circuits requiring efficient switching capabilities.
IRF530PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Case Connection: DRAIN; JESD-609 Code: e3;
IRFZ44NLPBF
IRFZ44NLPBF by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 160A IDM, 150mJ EAS, and 0.0175 ohm RDS(on). Operating at up to 175°C, it has a power dissipation of 94W in an IN-LINE package.
NVTFS5116PLTAG
NVTFS5116PLTAG by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, 126A IDM, and 0.072ohm RDS(on). Ideal for power management applications in small outline packages. Operating at up to 175°C, it features a built-in diode and avalanche energy rating of 45mJ.
FDD4243
The Onsemi FDD4243 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, 60A IDM, and 0.064 ohm RDS. Ideal for power management applications due to its high current handling capability and low on-resistance. Suitable for use in various electronic devices requiring efficient power control in compact designs.
JANTX2N6796
Defense Logistics Agency
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain-Source On Resistance: .18 ohm; Maximum Pulsed Drain Current (IDM): 32 A; Package Body Material: METAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTD80N02
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 75 W; JESD-30 Code: R-PSSO-G2; Transistor Application: SWITCHING;
NTD80N02-001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
NTD80N02-001G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Terminals: 3; Maximum Drain-Source On Resistance: .0058 ohm; JESD-30 Code: R-PSIP-T3;
NTD80N02-032
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Package Shape: RECTANGULAR; Maximum Pulsed Drain Current (IDM): 200 A;
NTD80N02032G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Pulsed Drain Current (IDM): 200 A; JESD-30 Code: R-PSIP-T3;
NTD80N02-1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Drain-Source On Resistance: .0058 ohm; No. of Elements: 1;
NTD80N02G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 75 W; Package Shape: RECTANGULAR; Maximum Pulsed Drain Current (IDM): 200 A;
NTD80N02T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 75 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (ID): 80 A;
NTD80N02T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 75 W; JESD-609 Code: e3; No. of Elements: 1;
NTD85N02R
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 78.1 W; Moisture Sensitivity Level (MSL): 1; Case Connection: DRAIN;
NTD85N02R-001
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 2.4 W; Qualification: Not Qualified; No. of Terminals: 3;
NTD85N02R-001G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain Current (ID): 85 A; Avalanche Energy Rating (EAS): 85 mJ; Package Body Material: PLASTIC/EPOXY;
NTD85N02R1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 78.1 W; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
NTD85N02R-1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 78.1 W; Package Style (Meter): IN-LINE; Transistor Element Material: SILICON;
NTD85N02RG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 78.1 W; Qualification: Not Qualified; JESD-30 Code: R-PSSO-G2;
NTD85N02RT4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 78.1 W; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
NTD85N02RT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 78.1 W; Transistor Application: SWITCHING; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved