Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTBG022N120M3S by Onsemi is a N-CHANNEL FET with 1200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 159A, EAS of 267mJ, and RDS(on) of 0.03 ohm. With a DRAIN case connection and SILICON CARBIDE element material, it operates b/w -55 to 175 °C.
Median Price
$13.852
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Arrow
1+ parts
$9.887
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$14.240
$11.500
Newark
$17.080
$13.970
$10.260
$10.010
Mouser Electronics
$19.700
$12.310
DigiKey
$20.630
$13.192
EBV Elektronik
Verical
$13.463
$12.050
$11.338
Rochester
$10.770
$9.640
$9.070
RS (Exports)
$11.904
$11.432
Vyrian
$2.587
Digiode
$6.716
Chip Stock
IBS Electronics
$15.399
NAC Semi
$23.070
$20.970
Flip Electronics
Corohmni
Corphita
$6.363
Continental Prestige Electronics
$20.460
$19.910
Microchip USA
$47.560
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
SupplyDigital Components
Problanco Electronics
Kulean Microsystems
Glotronic Ltd.
UHIMA Technologies
Eastek
$24.080
GreenTree Electronics
Authorized Procurement Solutions
The plastic/epoxy package body material provides good insulation and protection for the internal components of the FET, ensuring reliable performance and durability.
N-channel FETs typically have lower on-resistance and higher efficiency compared to P-channel FETs, making them a preferred choice for many switching applications.
The built-in diode simplifies circuit design and protects against voltage spikes, enhancing the overall reliability of the switching application.
Designed specifically for switching applications, this FET offers fast switching speeds and high efficiency, making it ideal for power management and control.
The high maximum pulsed drain current capability allows the FET to handle large peak currents, making it suitable for high-power applications where transient currents are common.
With a high avalanche energy rating, this FET can withstand energy spikes without breaking down, ensuring reliable operation in tough operating conditions.
The high maximum power dissipation capability allows the FET to handle high power levels without overheating, ensuring long-term reliability in demanding applications.
With a high maximum operating temperature, this FET can operate in elevated temperature environments without performance degradation, making it suitable for industrial applications.
Power Field Effect Transistors (FET) NTBG022N120M3S attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Maximum Feedback Capacitance (Crss):
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
NE555D
Philips Semiconductors
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Electronic Devices
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
261
Deltrol Controls
Other Relays;
DMP3099L-7
Diodes Incorporated
DMP3099L-7 by Diodes Inc. is a P-channel FET with 30V DS breakdown voltage and 3.8A max drain current, ideal for switching applications. It features a built-in diode, operates in enhancement mode, and has a low on-resistance of 0.065 ohm. Suitable for surface mount designs with small outline package style.
FDS6982AS
Onsemi
FDS6982AS by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features 2 ELEMENTS WITH BUILT-IN DIODE in a PLASTIC/EPOXY package, GULL WING terminals, and operates in ENHANCEMENT MODE. With a Max Drain Current of 8.6A and 0.0135 ohm On Resistance, it offers efficient performance up to 150°C.
AUIRFZ44NS
Infineon Technologies
AUIRFZ44NS by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 160A IDM, 150mJ EAS, and 0.0175 ohm RDS(ON). With a max power dissipation of 94W and operating temperature up to 175°C, it's suitable for high-power circuits.
IXTK3N250L
Littelfuse
IXTK3N250L by Littelfuse is a N-CHANNEL FET with 2500V DS Breakdown Voltage, ideal for AMPLIFIER applications. It features 8A IDM, 417W Abs Power Dissipation, and operates in ENHANCEMENT MODE. With a max operating temperature of 150°C and -55°C min, it offers reliable performance in various environments.
FDD4243
The Onsemi FDD4243 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, 60A IDM, and 0.064 ohm RDS. Ideal for power management applications due to its high current handling capability and low on-resistance. Suitable for use in various electronic devices requiring efficient power control in compact designs.
IRF7304TRPBF
IRF7304TRPBF by Infineon Technologies is a P-CHANNEL FET with 20V DS Breakdown Voltage and 3.6A ID. It features a built-in diode, 0.09 ohm RDS(on), and operates in enhancement mode. Ideal for power management applications requiring high drain current capabilities in compact designs.
FDMC86139P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 40 W; Terminal Form: NO LEAD; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRFP460
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Qualification: Not Qualified; Maximum Turn Off Time (toff): 228 ns;
AUIRFN8459TR
International Rectifier
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Reference Standard: AEC-Q101; No. of Terminals: 6; Avalanche Energy Rating (EAS): 66 mJ;
RFD14N05LSM9A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): 14 A;
IRF540NSTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 130 W; Avalanche Energy Rating (EAS): 185 mJ; JESD-609 Code: e3;
FDS4559_NL
FDS4559_NL by Fairchild Semiconductor is a Power FET with N/P-Channel, 2 elements w/ diode. Ideal for switching applications, it has max drain current of 4.5A, on-resistance of 0.055 ohm, and operates at up to 175°C. Package: PLASTIC/EPOXY, GULL WING terminals in SMALL OUTLINE style.
IRLML6401GTRPBF
IRLML6401GTRPBF by Infineon is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 34A and EAS of 33mJ, suitable for high-power operations. With a small outline package style and GULL WING terminals, it operates in temperatures ranging from -55 to 150 °C.
FDD86102LZ
FDD86102LZ by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 40A Pulsed Drain Current. Ideal for SWITCHING applications, it features a SINGLE configuration with built-in diode and operates in ENHANCEMENT MODE. Suitable for surface mount, this transistor has a max power dissipation of 54W and can handle up to 8A Drain Current.
SQ2337ES-T1_GE3
Vishay Intertechnology
The Vishay Intertechnology SQ2337ES-T1_GE3 is a P-CHANNEL Power FET with 80V DS Breakdown Voltage and 9A IDM. Ideal for applications requiring high power dissipation, it features a built-in diode, operates in enhancement mode, and has a small outline package style.
NVMFD5C650NLWFT1G
NVMFD5C650NLWFT1G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 502A IDM, and 0.0058 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance. Enhances performance in power management systems with its high current handling capabilities.
SI4946BEY-T1-GE3
Vishay Intertechnology's SI4946BEY-T1-GE3 is an N-channel power FET with a min DS breakdown voltage of 60V. It has a max pulsed drain current of 30A and an avalanche energy rating of 7.2mJ. This transistor is suitable for applications requiring high power dissipation and fast switching times.
MSC035SMA170B
Microchip Technology
Power Field-Effect Transistors;
FQP47P06
FQP47P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 47A Drain Current. Ideal for SWITCHING applications, it features an IDM of 188A, EAS of 820mJ, and 0.026 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 160W at 175°C.
IRLML0030TRPBF-1
Infineon's IRLML0030TRPBF-1 is a N-channel Power FET with 30V DS breakdown voltage and 21A IDM. Ideal for applications requiring high power dissipation up to 1.3W, such as in small outline packages where space is limited. Operating in enhancement mode, it offers low 0.027 ohm drain-source resistance for efficient performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTBG020N120SC1
NTBG020N120SC1 by Onsemi is a N-CHANNEL FET with 1200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max Drain Current of 98A, Avalanche Energy Rating of 264mJ, and Operating Temperature up to 175°C. This SINGLE configuration transistor has GULL WING terminals and METAL-OXIDE SEMICONDUCTOR technology in a RECTANGULAR package.
NTBG020N090SC1
The Onsemi NTBG020N090SC1 is a N-CHANNEL Power FET with 900V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 112A, 0.028 ohm On Resistance, and an Avalanche Energy Rating of 264mJ. This PLASTIC/EPOXY package has GULL WING terminals and operates in ENHANCEMENT MODE up to 175°C.
NTBG040N120SC1
NTBG040N120SC1 by Onsemi is a N-CHANNEL FET with 1200V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 240A IDM, 578mJ EAS, and 0.056ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 357W and operates at temperatures up to 175°C.
NTBG025N065SC1
NTBGS002N06C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 242 W; Minimum DS Breakdown Voltage: 60 V; Maximum Drain Current (ID): 252 A;
NTBG080N120SC1
NTBG080N120SC1 by Onsemi is a N-CHANNEL FET with 1200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 30A, 179W Power Dissipation, and operates in ENHANCEMENT MODE. With a peak reflow temperature of 245°C and an operating temperature range from -55 to 175°C, it offers reliable performance in various industrial settings.
NTBG015N065SC1
NTBG015N065SC1 by Onsemi is a N-CHANNEL FET with 650V DS Breakdown Voltage, ideal for power applications. It features a max Drain Current of 176A and Power Dissipation of 867W. With ENHANCEMENT MODE operation and SILICON CARBIDE material, it ensures high performance in various industrial settings.
NTBG028N170M1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 428 W; No. of Terminals: 7; Minimum DS Breakdown Voltage: 1700 V;
NTBGS001N06C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Operating Mode: ENHANCEMENT MODE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
NTBG060N065SC1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 344 W; Minimum Operating Temperature: -55 Cel; No. of Terminals: 7;
NTBG1000N170M1
NTBG040N120M3S
NTBG160N120SC1
The Onsemi NTBG160N120SC1 is a N-CHANNEL Power FET with 1200V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a max IDM of 78A and EAS of 120mJ. With a compact SMALL OUTLINE package and SILICON CARBIDE material, it operates b/w -55 to 175 °C for efficient performance.
NTBG030N120M3S
NTBG045N065SC1
NTBG045N065SC1 by Onsemi is a N-CHANNEL Power FET with 650V DS Breakdown Voltage. It features a Max IDM of 315A and ID of 73.7A, suitable for high-power applications like industrial motor drives and power supplies. With an operating temperature range from -55 to 175 °C, it offers reliable performance in various environments.
NTBG050N065SC1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 425 W; Transistor Element Material: SILICON CARBIDE; No. of Terminals: 7;
NTBG014N120M3P
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 454 W; Package Style (Meter): SMALL OUTLINE; Package Body Material: PLASTIC/EPOXY;
NTBG060N090SC1
The Onsemi NTBG060N090SC1 is a N-CHANNEL FET with 900V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 176A and EAS of 162mJ, operating in ENHANCEMENT MODE. With a Drain Current of 44A and 0.084 ohm RDS(on), this MOSFET offers high power dissipation up to 211W in a SMALL OUTLINE package.
NTBG070N120M3S
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved