Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTB6412ANG by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, 240A IDM, and 0.0182 ohm RDS(on). It is used in applications requiring high power dissipation up to 167W, such as power supplies and motor control systems.
Median Price
$1.452
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Avnet
1+ parts
-
100+ parts
$1.510
1k+ parts
$1.390
10k+ parts
$1.310
Rochester
$1.270
$1.140
$1.070
DigiKey
$1.480
Verical
$1.425
$1.337
Digiode
$1.349
Vyrian
$1.420
Bristol Electronics
$1.125
$1.050
Dan-Mar Components
J2 Sourcing AB
Corphita
$1.278
Corohmni
Microchip USA
$8.840
Kepictronics
Continental Prestige Electronics
$1.300
Kulean Microsystems
Authorized Procurement Solutions
TANS Electronics
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
The plastic/epoxy package body material provides durability and protection for the internal components, ensuring a long lifespan for the product.
N-channel FETs typically have higher electron mobility and lower ON resistance, making them efficient for various power applications.
The built-in diode simplifies circuit design and protects against reverse voltage polarity, enhancing the efficiency and reliability of the product.
Being surface mountable allows for easy and efficient PCB assembly, saving time and effort during production.
The high minimum breakdown voltage makes this FET suitable for applications requiring higher voltage handling capabilities.
The high pulsed drain current rating allows for handling of large current spikes, making this FET suitable for power-intensive applications.
With a high maximum power dissipation rating, this FET can effectively dissipate heat generated during operation, ensuring reliability under high power conditions.
The high maximum operating temperature tolerance allows this FET to function in elevated temperature environments without performance degradation.
The low ON resistance results in minimal power losses and heat generation, leading to high efficiency and improved overall performance.
Power Field Effect Transistors (FET) NTB6412ANG attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
NTB6412ANG Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Multiple Devices 05/Apr/2014
PCN Design/Specification - Mult Dev Material Chg 2/Oct/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
General Semiconductor
Kec
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
Diotec Semiconductor Ag
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
TN2510N8-G
Microchip Technology
TN2510N8-G by Microchip Technology is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 5A IDM, 1.6W Abs Power Dissipation, and operates in ENHANCEMENT MODE. With METAL-OXIDE SEMICONDUCTOR technology and -55 to 150 °C temperature range, it offers fast ton of 20ns and toff of 30ns for efficient performance.
FQP27P06
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Operating Mode: ENHANCEMENT MODE; Terminal Position: SINGLE;
STW11NK100Z
STMicroelectronics
STW11NK100Z by STMicroelectronics is a N-CHANNEL power FET with 1000V DS breakdown voltage. It is used for switching applications, with max drain current of 8.3A and on-resistance of 1.38 ohm.
IRFP460LC
International Rectifier
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Package Style (Meter): FLANGE MOUNT; Peak Reflow Temperature (C): 225;
IRF540STRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY;
IRLL014NTRPBF
Infineon Technologies
IRLL014NTRPBF by Infineon Technologies is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 16A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has an EAS of 32mJ and 0.14 ohm Drain-Source On Resistance.
AUIRF3205
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Drain Current (ID): 75 A; Maximum Drain Current (Abs) (ID): 75 A;
FDB44N25TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 307 W; Operating Mode: ENHANCEMENT MODE; Case Connection: DRAIN;
FDB33N25TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 235 W; Transistor Element Material: SILICON; Avalanche Energy Rating (EAS): 918 mJ;
BSP315P
BSP315P by Infineon Technologies is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 4.68A and EAS of 24mJ, operating in ENHANCEMENT MODE at up to 150°C. This SMALL OUTLINE transistor has 0.8 ohm RDS(on) and DUAL terminal position for efficient power dissipation.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
IRFH5010TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Package Style (Meter): SMALL OUTLINE; Minimum DS Breakdown Voltage: 100 V;
FQD7P20TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 55 W; Peak Reflow Temperature (C): 260; Transistor Application: SWITCHING;
FDMC86139P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 40 W; Terminal Form: NO LEAD; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IPA80R650CEXKSA2
Infineon's IPA80R650CEXKSA2 is a N-CHANNEL FET with 800V DS breakdown voltage, ideal for SWITCHING applications. Features include 24A IDM, 340mJ EAS, and 0.65 ohm RDS(on). Package style is FLANGE MOUNT with THROUGH-HOLE terminals.
IRF7749L1TRPBF
Infineon's IRF7749L1TRPBF is a N-CHANNEL FET with 375A ID, 125W power dissipation, and 175°C max temp. Ideal for high-power applications requiring single configuration surface mount technology.
FDS8858CZ
FDS8858CZ by Onsemi is a Power FET with N-Channel and P-Channel types, ideal for switching applications. It features a 30V DS breakdown voltage, 20A max pulsed drain current, and 0.017 ohm max drain-source resistance. With a small outline package style and operating temperature up to 150°C, it's suitable for various electronic designs.
FQT4N20LTF
FQT4N20LTF by Onsemi is a N-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max Pulsed Drain Current of 3.4A and Avalanche Energy Rating of 52mJ. With ENHANCEMENT MODE operation and small outline package style, it offers efficient performance in various electronic devices.
IRF7416TRPBF-1
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Elements: 1; Moisture Sensitivity Level (MSL): 1;
FDB52N20TM
FDB52N20TM by Onsemi is a power field effect transistor (FET) with a min DS breakdown voltage of 200V. It is an N-channel, single configuration transistor with a built-in diode, making it suitable for switching applications. With a max pulsed drain current of 208A and a max power dissipation of 357W, it offers high performance in a small outline package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTB60N06LT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Terminal Finish: TIN; No. of Terminals: 2;
NTB60N06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Terminal Position: SINGLE; Moisture Sensitivity Level (MSL): 1;
NTB60N06LG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Maximum Drain Current (ID): 60 A; Terminal Form: GULL WING;
NTB60N06LT4
NTB60N06LT4 by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage, 180A IDM, and 0.016 ohm RDS. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE at up to 175°C, making it suitable for high-power tasks.
NTB6410ANG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 188 W; No. of Terminals: 2; Package Style (Meter): SMALL OUTLINE;
NTB6448ANG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 188 W; Avalanche Energy Rating (EAS): 500 mJ; No. of Terminals: 2;
NTB65N02R
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 78 W; Terminal Finish: TIN LEAD; Transistor Element Material: SILICON;
NTB6410ANT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 188 W; Maximum Drain Current (ID): 76 A; No. of Elements: 1;
NTB65N02RG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 62.5 W; Case Connection: DRAIN; Maximum Drain Current (Abs) (ID): 65 A;
NTB6411ANG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 217 W; Maximum Time At Peak Reflow Temperature (s): 30; Package Body Material: PLASTIC/EPOXY;
NTB6411ANT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 217 W; Peak Reflow Temperature (C): 260; Qualification: Not Qualified;
NTB6413ANT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 136 W; Qualification: Not Qualified; Maximum Drain Current (ID): 42 A;
NTB60N06T4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Package Shape: RECTANGULAR; Qualification: Not Qualified;
NTB6448ANT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 188 W; JESD-609 Code: e3; No. of Terminals: 2;
NTB60N06G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; JESD-609 Code: e3; Package Style (Meter): SMALL OUTLINE;
NTB60N06
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Operating Mode: ENHANCEMENT MODE; Case Connection: DRAIN;
NTB6412ANT4G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 167 W; Package Body Material: PLASTIC/EPOXY; Maximum Pulsed Drain Current (IDM): 240 A;
NTB60N06T4
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Minimum DS Breakdown Voltage: 60 V; JESD-609 Code: e0;
NTB6413ANG
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 136 W; Maximum Operating Temperature: 175 Cel; Terminal Position: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved