Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Peak Reflow Temperature (C): 260; No. of Elements: 1;
Median Price
$1.862
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Farnell
1+ parts
$2.340
100+ parts
$1.210
1k+ parts
$1.040
10k+ parts
-
Newark
$3.990
$1.820
$1.750
$1.670
Mouser Electronics
$4.050
$1.800
Element14
$5.430
$2.320
$2.060
Arrow
$1.375
Verical
$1.383
Flip Electronics (Authorized)
DigiKey
$1.303
Chip1Stop
$1.191
Rochester
$1.240
$1.110
RS (Exports)
$2.596
$1.752
Nova Conductors
$1.761
Digiode
$2.802
IBS Electronics
$5.400
$3.412
$4.907
Chip Stock
NAC Semi
$1.510
Vyrian
Flip Electronics
Cyclops Electronics Ltd
Sensible Micro Corp
ComSIT Distribution GmbH
ComSIT USA
Cogito LLC
Ampacity Inc.
$1.010
Semicontronic
$0.985
$0.980
Corohmni
Aztec Data Supply Inc.
$1.282
Continental Prestige Electronics
$1.590
$1.558
Argo Parts USA
Aranea Global
$1.726
$1.657
Modulus Dynamics
$1.882
Advanced Electronics
$1.938
$1.842
Corphita
$2.655
Perfect Parts
RC Electronics
$1.660
$1.610
Authorized Procurement Solutions
Lixinc
Kepictronics
Futuretech Components
TANS Electronics
Problanco Electronics
Eastek
SupplyDigital Components
Infinite Electronics LLP (Excess)
Supply Digital
iodParts Technologies Inc.
Kulean Microsystems
UHIMA Technologies
Robosynatics
$0.011
Lucentia Tech
Computer Components Inc. - USA
Power Field Effect Transistors (FET) FDMS86300DC attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Fairchild Semiconductor
Additional Features:
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDMS86300DC Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
PCN Design/Specification - Mult Dev 06/Dec/2022 Mult Dev Material/Assembly Chg 20/Mar/2018
PCN Assembly/Origin - Wafer Fab Change 28/Sep/2021
PCN Packaging - Mult Devices 24/Oct/2017
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Micropac Industries
LM358MX
Fairchild Semiconductor
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
FQT5P10TF
FQT5P10TF by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a 4A IDM and 55mJ EAS. With a small outline package style and matte tin finish, this MOSFET operates in ENHANCEMENT MODE up to 150°C.
SUD50P06-15L-E3
Vishay Intertechnology
Vishay Intertechnology's SUD50P06-15L-E3 is a P-channel power FET with 60V DS breakdown voltage and 50A max drain current. Ideal for switching applications, it features a built-in diode, 0.015 ohm max on-resistance, and operates in enhancement mode. Suitable for surface mount with Gull Wing terminals, it has a max power dissipation of 136W and can withstand up to 175°C operating temperature.
FQA36P15
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 294 W; Minimum DS Breakdown Voltage: 150 V; Qualification: Not Qualified;
FDS8949
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Peak Reflow Temperature (C): 260; Maximum Pulsed Drain Current (IDM): 20 A;
SUD50P06-15-GE3
Vishay Intertechnology's SUD50P06-15-GE3 is a P-channel Power FET with 60V DS breakdown voltage and 80A IDM. Ideal for switching applications, it features a single configuration with built-in diode, 0.015 ohm max RDS(on), and operates in enhancement mode.
FDD4685-F085P
FDD4685-F085P by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 32A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, operates in ENHANCEMENT MODE, and has an Avalanche Energy Rating of 121mJ.
SI7145DP-T1-GE3
Vishay Intertechnology's SI7145DP-T1-GE3 is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a max IDM of 100A and EAS of 125mJ, this MOSFET operates in ENHANCEMENT MODE. With 0.0026 ohm RDS(on), it can handle up to 104W power dissipation at 150°C.
IRF9530PBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): 12 A;
IRFP4468PBF
Infineon Technologies
IRFP4468PBF by Infineon is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It has a max IDM of 1120A and EAS of 740mJ, ideal for SWITCHING applications. With 0.0026 ohm RDS(on) and 520W Pdiss, it operates in ENHANCEMENT MODE at up to 175°C.
FDS3672
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Element Material: SILICON;
IRF9640STRLPBF
Vishay Siliconix
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Shape: RECTANGULAR; Maximum Drain-Source On Resistance: .5 ohm; Operating Mode: ENHANCEMENT MODE;
IRF640NPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Operating Temperature: 150 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSP149H6327XTSA1
Infineon Technologies' BSP149H6327XTSA1 is a N-CHANNEL Power FET with 200V DS breakdown voltage. It has a max drain current of 0.66A and operates in depletion mode. This transistor, with its small outline package style, is suitable for various applications requiring high power dissipation and temperature resistance up to 150°C.
IRF9540PBF
Vishay Intertechnology's IRF9540PBF is a P-CHANNEL FET with 100V DS Breakdown Voltage and 72A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 150W, -55 to 175°C operating temperature range, and 0.2 ohm Drain-Source On Resistance.
FDB2532
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 310 W; Qualification: Not Qualified; Maximum Operating Temperature: 175 Cel;
IRF7413ZTRPBF
Infineon's IRF7413ZTRPBF is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 100A IDM, 32mJ EAS, and 0.01 ohm RDS(on). With a max temp of 150°C, this MOSFET in GULL WING package is designed for high-power ENHANCEMENT MODE operations.
NDS7002A_NB9GGTXA
Fairchild Semiconductor's NDS7002A_NB9GGTXA is a single N-channel power FET for switching applications. It features a 60V DS breakdown voltage, 1.5A max pulsed drain current, and 2 ohm max drain-source resistance. With Gull Wing terminals and small outline package style, it operates in an enhancement mode with a temperature range of -65 to 150°C.
2N7002DW
Diodes Incorporated
N-CHANNEL; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Tin/Lead (Sn/Pb); Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
FDS4675
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; Maximum Drain Current (ID): 11 A; Terminal Position: DUAL;
IRF9530
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-30 Code: R-PSFM-T3; Terminal Form: THROUGH-HOLE; Additional Features: AVALANCHE RATED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDMS86163P
FDMS86163P by Onsemi is a P-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 100A and EAS of 486mJ, operating in ENHANCEMENT MODE. With a package style of SMALL OUTLINE and -55 to 150 °C temperature range, it offers high performance in power management systems.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 100 V;
FDMS86101DC
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Package Shape: RECTANGULAR; Maximum Drain Current (ID): 14.5 A;
FDMS86101DC by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 200A IDM, and 0.0075 ohm RDS(on). Ideal for SWITCHING applications, it features a built-in diode, operates in ENHANCEMENT MODE, and has a max power dissipation of 125W.
FDMS86263P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Package Style (Meter): SMALL OUTLINE; Maximum Pulsed Drain Current (IDM): 70 A;
The Onsemi FDMS86263P is a P-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 70A and EAS of 384mJ, operating in ENHANCEMENT MODE. With a compact SMALL OUTLINE package style and -55 to 150 °C temperature range, it offers efficient performance in various electronic systems.
FDMS86300DC
FDMS86300DC by Onsemi is a N-CHANNEL Power FET with 80V DS Breakdown Voltage, ideal for SWITCHING applications. It features 260A IDM Pulsed Drain Current, 0.0031 ohm RDS(ON), and 240mJ EAS Avalanche Energy Rating. With a max power dissipation of 125W and operating temperature up to 150°C, it is suitable for high-power switching circuits in various electronic devices.
FDMS86252L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Case Connection: DRAIN; No. of Elements: 1;
FDMS86252L by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, 30A IDM, and 0.056 ohm RDS(on). Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 50W and can withstand temperatures up to 150°C.
FDMS86350ET80
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 187 W; Minimum DS Breakdown Voltage: 80 V; No. of Elements: 1;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 187 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 5;
FDMS86101A
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Avalanche Energy Rating (EAS): 486 mJ; Package Body Material: PLASTIC/EPOXY;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Transistor Element Material: SILICON; Terminal Position: DUAL;
FDMS86101
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Minimum DS Breakdown Voltage: 100 V; Terminal Position: DUAL;
FDMS86101 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 200A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.008 ohm RDS(on), and 135mJ EAS rating. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 104W in a small outline package.
FDMS86102LZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 69 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 69 W; JESD-30 Code: R-PDSO-F5; Minimum DS Breakdown Voltage: 100 V;
FDMS86200DC
FDMS86200DC by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage and 100A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.017 ohm RDS(on), and 125W Pdiss. Perfect for high-power systems requiring efficient switching capabilities in a compact SMALL OUTLINE package.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Maximum Drain-Source On Resistance: .017 ohm; Avalanche Energy Rating (EAS): 294 mJ;
FDMS86310
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 96 W; JEDEC-95 Code: MO-240AA; Case Connection: DRAIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved