Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Operating Mode: ENHANCEMENT MODE; Package Style (Meter): FLANGE MOUNT;
Median Price
$25.460
Lifecycle Status
Suppliers In-Stock
53
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
$5.980
1k+ parts
-
10k+ parts
EXC GmbH
$1.362
Forefront Electronics and Design
$2.450
Freelance Electronics
$2.531
TEDSS.com
$5.000
Nova Conductors
Component Electronics Inc.
$6.150
$4.620
$4.000
American Microsemiconductor Inc.
$6.880
Digiode
$24.187
Chip Stock
Q Components
Vyrian
Anansix
Micros
$3.280
$3.233
Electronic Expediters
Partservice
$3.237
$3.210
Micros sp.j. W. Kędra i J. Lic
$3.468
$3.439
Classic Components Corporation
Tech-Mark Corp
Bristol Electronics
Sunrise Surplus Inc.
LWI Electronics Inc
Lantek
EPE Components Inc.
Kiltronic GmbH
ComSIT Distribution GmbH
Rebound Electronics
ACDS - Activité Composants Distribution Service
J & M Industries LLC
Pegasus Components GmbH
Fibra_Brandt Electronic GMBH
Lakeland Logistics Inc
Jameco Electronics
LittleDiode
ECAB
LIBRA Elektronik GmbH
Corel Iberica Componentes, S.L.
Sinequanon
Maverick Electronics, Inc.
Cogito LLC
Carlin Systems, Inc.
EMSNET
Holdelec - ElecDif-Pro
Diverse Electronics
Inland Empire Components Inc.
Mil-Aero Solutions, Inc.
MISTER SPROCKETS
Prism Electronics
Goldney Electronics S.L.
Halfin
GES GmbH
Connector Distribution Corp
Right Parts Inc.
Aztec Data Supply Inc.
$0.813
IDEA Electronic Components Group
$1.164
$1.047
MKK Technologies
$2.188
DigiPath Technology Company
Corohmni
Continental Prestige Electronics
$5.860
Advanced Electronics
$6.159
$5.851
AZTECH Wire
$17.250
Ampacity Inc.
$21.640
Semicontronic
$21.099
$20.991
Corphita
$22.914
Andel Nordic
$40.370
$28.261
A-Z Elektronik GmbH
UNI Independent Distributors
Alle Elektronik GmbH
Supply Digital
S.R.D Solutions
Authorized Procurement Solutions
Assy Fe
Argo Parts USA
Perfect Parts
Netroflash
$5.681
$5.561
Parana Technologies
$1.392
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Power Field Effect Transistors (FET) IRFP460 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from STMicroelectronics
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
IRFP460 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5961-01-383-1371, 5961013831371
NIIN
013831371
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Sensitron Semiconductor
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
SDR0604-101KL
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Leshan Radio
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
ECA2DHG4R7
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
IRF4905PBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; JESD-30 Code: R-PSFM-T3; Operating Mode: ENHANCEMENT MODE;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SQM120P06-07L-GE3
Vishay Intertechnology
Vishay Intertechnology's SQM120P06-07L-GE3 is a P-channel power FET with 60V DS breakdown voltage, 120A max drain current, and 0.0067 ohm on-resistance. Ideal for high-power applications in enhancement mode operation with 480A pulsed drain current capability.
IRF9310TRPBF
Infineon Technologies
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Qualification: Not Qualified; Maximum Drain Current (Abs) (ID): 20 A;
BSC016N06NSTATMA1
Infineon's BSC016N06NSTATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0016 ohm RDS(on), and 380mJ EAS. Its METAL-OXIDE SEMICONDUCTOR technology and DUAL terminal position make it suitable for high-power operations in various electronic devices.
FDMS86300DC
Onsemi
FDMS86300DC by Onsemi is a N-CHANNEL Power FET with 80V DS Breakdown Voltage, ideal for SWITCHING applications. It features 260A IDM Pulsed Drain Current, 0.0031 ohm RDS(ON), and 240mJ EAS Avalanche Energy Rating. With a max power dissipation of 125W and operating temperature up to 150°C, it is suitable for high-power switching circuits in various electronic devices.
FDD4243_F085
Fairchild Semiconductor
Fairchild Semiconductor's FDD4243_F085 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage, 24A Drain Current, and 0.044 ohm On Resistance. Ideal for SWITCHING applications in automotive (AEC-Q101) and industrial sectors due to its high power dissipation of 42W and wide operating temperature range (-55 to 175 °C).
BSC320N20NS3GATMA1
BSC320N20NS3GATMA1 by Infineon is a N-CHANNEL FET with 200V DS breakdown voltage, 144A pulsed drain current, and 0.032 ohm max on resistance. Ideal for switching applications due to its single configuration with built-in diode and enhancement mode operation. Package style is small outline, suitable for surface mount technology.
IPT015N10N5ATMA1
Infineon IPT015N10N5ATMA1 is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 1200A IDM, 652mJ EAS, and 0.0015 ohm RDS(on). Package style is SMALL OUTLINE with METAL-OXIDE SEMICONDUCTOR technology.
NDT3055
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Transistor Element Material: SILICON; JESD-30 Code: R-PDSO-G4;
IRF540SPBF
Vishay Intertechnology's IRF540SPBF is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 110A IDM, 230mJ EAS, and 0.077 ohm RDS(on). With a max power dissipation of 150W and operating temperature up to 175°C, it is suitable for high-power circuits requiring efficient switching capabilities.
IRF640
Comset Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JEDEC-95 Code: TO-220AB; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Transistor Element Material: SILICON;
CSD18563Q5A
CSD18563Q5A by Texas Instruments is a N-CHANNEL FET for SWITCHING applications. It features 60V DS Breakdown Voltage, 96A IDM, and 0.0108 ohm RDS(on). With a max power dissipation of 116W, it operates in temperatures ranging from -55 to 150 °C.
IRF7410TRPBF
Infineon's IRF7410TRPBF is a P-CHANNEL FET with 20V DS Breakdown Voltage, ideal for SWITCHING applications. It features 65A IDM, 0.007 ohm RDS(on), and operates in ENHANCEMENT MODE. With GULL WING terminals and SMALL OUTLINE package, it can withstand -55 to 150 °C temperatures.
FDS6982AS
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Maximum Drain-Source On Resistance: .0135 ohm; Package Style (Meter): SMALL OUTLINE;
IRFR9024PBF
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Maximum Power Dissipation Ambient: 42 W; No. of Terminals: 2;
BSC030P03NS3GAUMA1
BSC030P03NS3GAUMA1 by Infineon is a P-CHANNEL FET with 30V DS Breakdown Voltage, 200A IDM, and 0.0046 ohm RDS(ON). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 125W. The transistor has a small outline package style and can withstand temperatures from -55 to 150 °C.
BSZ100N06LS3GATMA1
BSZ100N06LS3GATMA1 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, 80A IDM, and 0.0179 ohm RDS. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation. Package: PLASTIC/EPOXY, Surface Mountable, with DUAL terminals and DRAIN case connection.
PMV40UN2R
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 5 W; No. of Elements: 1; Reference Standard: IEC-60134;
IPA80R650CEXKSA2
Infineon's IPA80R650CEXKSA2 is a N-CHANNEL FET with 800V DS breakdown voltage, ideal for SWITCHING applications. Features include 24A IDM, 340mJ EAS, and 0.65 ohm RDS(on). Package style is FLANGE MOUNT with THROUGH-HOLE terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IRFP460PBF
Vishay Intertechnology's IRFP460PBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features 80A IDM, 960mJ EAS, and 0.27 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 280W at up to 150°C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Operating Mode: ENHANCEMENT MODE; Terminal Position: SINGLE;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Drain-Source On Resistance: .27 ohm; Avalanche Energy Rating (EAS): 960 mJ;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Package Style (Meter): FLANGE MOUNT; Case Connection: DRAIN;
IRFP4668PBF
IRFP4668PBF by Infineon is a N-CHANNEL Power FET with 200V DS Breakdown Voltage. It has a max IDM of 520A and EAS of 760mJ, suitable for SWITCHING applications. With 0.0097 ohm RDS(on) and 520W Pdiss, it operates in ENHANCEMENT MODE at up to 175°C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 520 W; No. of Elements: 1; Maximum Drain Current (ID): 130 A;
IRFP250NPBF
IRFP250NPBF by Infineon is a N-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features 120A IDM, 315mJ EAS, and 0.075ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 214W and can withstand temperatures from -55 to 150 °C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 214 W; Maximum Drain Current (ID): 30 A; No. of Terminals: 3;
IRFP260NPBF
IRFP260NPBF by Infineon is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 50A Drain Current. Ideal for SWITCHING applications, it features a 300W Power Dissipation, -55 to 175 °C Operating Temp, and 0.04 ohm On Resistance.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 300 W; Qualification: Not Qualified; Transistor Application: SWITCHING;
IRFP4468PBF
IRFP4468PBF by Infineon is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It has a max IDM of 1120A and EAS of 740mJ, ideal for SWITCHING applications. With 0.0026 ohm RDS(on) and 520W Pdiss, it operates in ENHANCEMENT MODE at up to 175°C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 520 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
IRFP460
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Maximum Drain Current (ID): 20 A; No. of Terminals: 3;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Maximum Drain Current (Abs) (ID): 20 A; Maximum Operating Temperature: 150 Cel;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Minimum DS Breakdown Voltage: 500 V; JEDEC-95 Code: TO-247;
Intersil
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Transistor Element Material: SILICON; Avalanche Energy Rating (EAS): 960 mJ;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Maximum Drain-Source On Resistance: .27 ohm; JEDEC-95 Code: TO-247;
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Operating Mode: ENHANCEMENT MODE; JEDEC-95 Code: TO-247AC;
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (Abs) (ID): 20 A;
IRFP440PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Position: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved