Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Infineon's BSC016N06NSTATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0016 ohm RDS(on), and 380mJ EAS. Its METAL-OXIDE SEMICONDUCTOR technology and DUAL terminal position make it suitable for high-power operations in various electronic devices.
Median Price
$2.580
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$3.860
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$3.870
$1.780
$1.570
$1.480
DigiKey
$1.584
$1.294
Newark
$4.460
$2.880
Rochester
$1.290
$1.160
$1.090
Verical
$1.450
$1.363
Farnell
$2.550
$1.590
$1.560
Element14
$2.120
$1.920
Future Electronics
$3.240
Arrow
$1.407
RS (Exports)
$2.494
$2.148
Nova Conductors
$2.050
Digiode
$2.755
Chip Stock
Vyrian
Component Sense
IBS Electronics
$4.544
VNN
LWI Electronics Inc
Aztec Data Supply Inc.
$0.977
Semicontronic
$1.220
$1.190
$1.183
Ampacity Inc.
Argo Parts USA
Netroflash
$1.947
$1.906
Modulus Dynamics
$2.350
$2.256
$2.162
Corohmni
Continental Prestige Electronics
$2.420
$1.410
$1.020
Advanced Electronics
$2.299
Corphita
$2.610
Component Stockers USA
$3.100
$2.100
$1.510
$1.440
Microchip USA
$10.236
Robosynatics
$2.303
Lucentia Tech
Perfect Parts
Allen Electronics Distributors
$2.546
Glotronic Ltd.
The plastic/epoxy material provides good insulation and protection for the transistor, making it durable and reliable for long-term use.
N-channel FETs typically have lower on-resistance and higher switching speeds compared to P-channel FETs, making them more efficient for certain applications.
The built-in diode allows for more efficient switching and protection against reverse current flow, enhancing the overall performance of the transistor.
Designed specifically for switching applications, this transistor is optimized for fast and efficient operation in various circuit designs.
With a high pulsed drain current rating, this transistor can handle sudden spikes in power without getting damaged, making it suitable for high-power applications.
The high drain current rating ensures that the transistor can handle continuous current flow without overheating or failing, providing reliable performance in various circuit configurations.
The low on-resistance minimizes power loss and heat generation in the transistor, ensuring efficient operation and high performance in switching applications.
Metal-oxide semiconductor technology offers good efficiency, reliability, and performance, making this FET suitable for a wide range of applications requiring high switching speeds.
Power Field Effect Transistors (FET) BSC016N06NSTATMA1 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Infineon Technologies
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
BSC016N06NSTATMA1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Mult Dev Mould Chgs 22/Jun/2022
PCN Assembly/Origin - Optimos Site/Mat Chgs 30/May/2022
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Vishay Telefunken
Multicomp Pro
Electronic Transistors
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Hitano Enterprise
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
MBR0520LT1
Motorola
NVMFS5113PLT1G
NVMFS5113PLT1G by Onsemi is a P-CHANNEL power FET with a min DS breakdown voltage of 60V. It has a max pulsed drain current of 415A and an avalanche energy rating of 315mJ. This transistor is commonly used in automotive applications due to its AEC-Q101 reference standard and moisture sensitivity level of MSL1.
IXTA96P085T
IXYS Corporation
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 298 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
IRLML0060TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Moisture Sensitivity Level (MSL): 1; Package Body Material: PLASTIC/EPOXY;
MSC035SMA170B
Microsemi
Power Field-Effect Transistors;
SI7469DP-T1-GE3
Vishay Intertechnology
Vishay Intertechnology's SI7469DP-T1-GE3 is a P-channel FET with 80V DS breakdown voltage, 40A IDM, and 0.025 ohm RDS(on). Ideal for power management applications due to its 83W max power dissipation, small outline package style, and -55 to +150°C operating temperature range.
IRF740APBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; No. of Terminals: 3; Avalanche Energy Rating (EAS): 630 mJ;
AUIRFR5305TR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 110 W; Maximum Drain-Source On Resistance: .065 ohm; JEDEC-95 Code: TO-252AA;
FDS3890
FDS3890 by Onsemi is a N-CHANNEL Power FET with 80V DS Breakdown Voltage and 20A IDM. Ideal for SWITCHING applications, it features a SEPARATE configuration with 2 ELEMENTS, built-in DIODE, and 0.044 ohm Drain-Source On Resistance. The transistor operates in ENHANCEMENT MODE, has a max power dissipation of 2W, and can withstand temperatures up to 175°C.
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DN3535N8-G
Microchip Technology
DN3535N8-G by Microchip Technology is a N-CHANNEL FET with 0.5A IDM, 1.6W Abs Pd, and 10ohm RDS(on). Ideal for switching applications in small outline packages, operating from -55 to 150°C.
BSP318SH6327XTSA1
Infineon Technologies
Infineon's BSP318SH6327XTSA1 is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 10.4A Pulsed Drain Current. Ideal for automotive applications, it features a built-in diode, 0.15 ohm On Resistance, and 260°C Peak Reflow Temperature.
IRFZ44NLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 94 W; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; No. of Terminals: 3;
IRF530A
Samsung
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 55 W; Terminal Position: SINGLE; Maximum Drain-Source On Resistance: .11 ohm;
IPT015N10N5ATMA1
Infineon IPT015N10N5ATMA1 is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 1200A IDM, 652mJ EAS, and 0.0015 ohm RDS(on). Package style is SMALL OUTLINE with METAL-OXIDE SEMICONDUCTOR technology.
DMP4065S-7
Diodes Incorporated
DMP4065S-7 by Diodes Inc. is a P-channel FET with 40V DS breakdown voltage and 20A IDM, ideal for switching applications. It operates in enhancement mode, has 0.08 ohm RDS(on), and can handle up to 1.4W power dissipation. With a max temp of 150°C, it's suitable for various electronic designs requiring high-performance MOSFETs.
SUD50P06-15L-E3
Vishay Intertechnology's SUD50P06-15L-E3 is a P-channel power FET with 60V DS breakdown voltage and 50A max drain current. Ideal for switching applications, it features a built-in diode, 0.015 ohm max on-resistance, and operates in enhancement mode. Suitable for surface mount with Gull Wing terminals, it has a max power dissipation of 136W and can withstand up to 175°C operating temperature.
FQP30N06L
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 79 W; Qualification: Not Qualified; JESD-609 Code: e3;
STD30NF06LT4
STD30NF06LT4 by STMicroelectronics is an N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 140A and 0.03 ohm RDS(on), operating in ENHANCEMENT MODE at up to 175°C. This power transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount assembly.
IRF740PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
IRF840SPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Element Material: SILICON; Maximum Drain Current (ID): 8 A; Qualification: Not Qualified;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BSC011N03LSIATMA1
Infineon's BSC011N03LSIATMA1 is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0015 ohm RDS(on), and 100mJ EAS rating. Its small outline package and DUAL terminal position make it suitable for various power management systems.
BSC011N03LSATMA1
Infineon BSC011N03LSATMA1 is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0014 ohm RDS(on), and 190mJ EAS rating. Its METAL-OXIDE SEMICONDUCTOR technology and DUAL terminal position make it suitable for high-power circuits.
BSC016N06NSATMA1
Infineon's BSC016N06NSATMA1 is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a max IDM of 400A and EAS of 380mJ, ensuring efficient operation. With a drain-source on resistance of 0.0016 ohm and operating temperature up to 150°C, it offers high performance in a small outline package.
BSC093N15NS5ATMA1
Infineon BSC093N15NS5ATMA1 is a N-CHANNEL FET with 150V DS breakdown voltage, 0.0093 ohm RDS(on), and 348A IDM. Ideal for switching applications due to its built-in diode, it operates in enhancement mode and has an EAS of 130mJ. The transistor's small outline package makes it suitable for surface mount designs.
BSC030P03NS3GAUMA1
BSC030P03NS3GAUMA1 by Infineon is a P-CHANNEL FET with 30V DS Breakdown Voltage, 200A IDM, and 0.0046 ohm RDS(ON). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 125W. The transistor has a small outline package style and can withstand temperatures from -55 to 150 °C.
BSC028N06NSATMA1
Infineon BSC028N06NSATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.0028 ohm RDS(on), and 23A ID. Ideal for SWITCHING applications due to its 400A IDM and 100mJ EAS ratings. Suitable for ENHANCEMENT MODE operation in various electronic devices.
BSC026N08NS5ATMA1
Infineon Technologies' BSC026N08NS5ATMA1 is a power FET with N-channel configuration and built-in diode. It has a min DS breakdown voltage of 80V, max pulsed drain current of 400A, and low on-resistance of 0.0026 ohm. Ideal for switching applications in various industries.
BSC035N10NS5ATMA1
Infineon BSC035N10NS5ATMA1 is a N-CHANNEL FET with 100V DS Breakdown Voltage, 0.0035 ohm RDS(on), and 400A IDM. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Features METAL-OXIDE SEMICONDUCTOR tech in a SMALL OUTLINE package with DUAL terminals.
BSC014N06NSATMA1
BSC014N06NSATMA1 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage, 0.00145 ohm RDS(on), and 400A IDM. Ideal for switching applications, it features a built-in diode, operates in enhancement mode, and has an EAS of 580mJ.
BSC098N10NS5ATMA1
BSC098N10NS5ATMA1 by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for switching applications. Features include 240A pulsed drain current, 0.0098 ohm max on resistance, and 30mJ avalanche energy rating. Package style is small outline with 8 terminals in plastic/epoxy material.
BSC067N06LS3GATMA1
BSC067N06LS3GATMA1 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 200A IDM, 47mJ EAS, and 0.0067 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max temp of 150°C and SILICON element material.
BSC014N04LSIATMA1
Infineon BSC014N04LSIATMA1 is a N-CHANNEL FET with 40V DS Breakdown Voltage, 780A IDM, and 0.002 ohm RDS(ON). Ideal for power applications requiring high drain current handling and low on-resistance. Suitable for use in various electronic devices due to its small outline package and high power dissipation capability.
BSC028N06NSTATMA1
BSC028N06NSTATMA1 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage, 0.0028 ohm max RDS(on), and 400A IDM. It's used for switching applications due to its built-in diode, small outline package style, and high pulsed drain current capacity.
BSC011N03LSTATMA1
Infineon's BSC011N03LSTATMA1 is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 400A IDM, 0.0014 ohm RDS(on), and 190mJ EAS. Its small outline package and DUAL terminals make it suitable for high-power ENHANCEMENT MODE operations.
BSC030P03NS3GXT
BSC030P03NS3GXT by Infineon is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features 200A IDM, 345mJ EAS, and 0.0046 ohm RDS(ON). With ENHANCEMENT MODE operation and -55 to 150 °C temperature range, it offers high performance in a SMALL OUTLINE package.
BSC060N10NS3G
BSC060N10NS3G by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, 360A IDM, and 0.006 ohm RDS(on). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 125W. This PLASTIC/EPOXY transistor has a small outline package style and can withstand temperatures up to 150°C.
BSC060N10NS3GATMA1
BSC060N10NS3GATMA1 by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage, 0.006 ohm Drain-Source Resistance, and 360A Pulsed Drain Current. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Suitable for high-power systems requiring efficient power management in compact designs.
BSC070N10NS3GATMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-609 Code: e3; Case Connection: DRAIN; Maximum Pulsed Drain Current (IDM): 360 A;
BSC060N10NS3GATMA1/SAMPLE
BSC060N10NS3GATMA1/SAMPLE by Infineon is a N-CHANNEL FET with PLASTIC/EPOXY package, ideal for SWITCHING applications. It features SINGLE configuration with built-in DIODE and METAL-OXIDE SEMICONDUCTOR technology. This 8-terminal transistor has RECTANGULAR shape, DUAL position terminals, and DRAIN case connection for surface mount use.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved