Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAC997A8RL1G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 0.8A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control in various electronic devices.
Median Price
$0.190
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.198
1k+ parts
$0.164
10k+ parts
$0.147
Verical
$0.183
Digiode
$0.155
Chip Stock
Vyrian
Corphita
Corohmni
$0.163
AZTECH Wire
$5.510
$5.290
$5.190
$5.080
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
TANS Electronics
UHIMA Technologies
Perfect Parts
This material offers durability and helps protect the internal components of the TRIAC, making it a reliable choice for long-term use.
The low trigger current requirement ensures efficient operation and enables easy control of the TRIAC.
The single configuration simplifies the setup and installation process, making it user-friendly.
The round shape allows for compact and space-saving design, ideal for applications where space is limited.
The through-hole terminals provide secure connections and ease of soldering, ensuring a reliable electrical connection.
The low leakage current helps in reducing power losses and maintaining efficient performance of the TRIAC.
Having 3 terminals allows for easy connection in circuits, offering flexibility in design and implementation.
The cylindrical package style offers a robust and compact design, suitable for various applications requiring a TRIAC.
With a high maximum operating temperature, this TRIAC can withstand elevated temperatures, ensuring reliable operation in various environments.
The 4-quadrant logic level TRIAC allows for precise control and switching capabilities, making it suitable for a wide range of applications.
The low minimum operating temperature enables this TRIAC to function in cold environments, providing versatility in usage.
The terminal finish offers excellent conductivity and corrosion resistance, ensuring a reliable electrical connection.
The bottom terminal position facilitates easy installation and connection in circuits, making it convenient for users.
The high maximum RMS on-state current rating enables this TRIAC to handle higher loads, making it versatile for various applications.
The low gate trigger voltage requirement ensures efficient control and activation of the TRIAC, enhancing its performance.
The high repetitive peak off-state voltage rating provides protection against voltage spikes and surges, ensuring device longevity.
The minimum critical rate of rise of off-state voltage ensures reliable and stable operation, protecting the device from voltage fluctuations.
The maximum holding current capability allows for stable operation and reliable switching of the TRIAC, ensuring consistent performance.
The high peak reflow temperature tolerance enables the TRIAC to withstand the soldering process without damage, ensuring proper assembly and functionality.
Triode For Alternating Current (TRIAC) MAC997A8RL1G attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Additional Features:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
MAC997A8RL1G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Obsolescence/ EOL - Multiple Devices 08/Nov/2014 Multiple Devices Revision 26/Nov/2014
PCN Design/Specification - Cu wire conversion/New compound 26/Jul/2013
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
CRCW06030000Z0EAHP
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
BTA25-800CW3G
BTA25-800CW3G by Onsemi is a single TRIAC with 25A RMS on-state current, 800V repetitive peak off-state voltage, and 35mA max DC gate trigger current. Ideal for AC power control applications in various industries due to its snubberless design and wide operating temperature range from -40°C to 125°C.
BT139-800G
NXP Semiconductors
BT139-800G by NXP Semiconductors is a single TRIAC with a max RMS on-state current of 16A and repetitive peak off-state voltage of 800V. It is ideal for applications requiring a 4 quadrant logic level TRIAC, such as in AC power control systems. With a max operating temperature of 125°C, it offers reliable performance in various environments.
BCR08AM-14A#BD0
Integrated Device Technology
TRIAC;
BTA40-800B
Continental Device India
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
DTN8E
DTN8E by Onsemi is a TRIAC with 1.5V max on-state voltage, 50mA max DC gate trigger current, and 8A max RMS on-state current. It operates b/w -40 °C to 110°C and has a repetitive peak off-state voltage of 400V. Ideal for AC power control applications.
2N6071AT
2N6071AT by Onsemi is a TRIAC with 4A RMS on-state current, 5mA DC gate trigger current, and 200V repetitive peak off-state voltage. It operates b/w -40 to 150 °C and is ideal for applications requiring precise AC power control such as dimmers and motor speed controllers.
BT139B-800E,118
BT139B-800E,118 by NXP Semiconductors is a TRIAC with 16A RMS on-state current and 800V repetitive peak off-state voltage. Ideal for applications requiring 4 quadrant logic level TRIACs, it operates b/w -40 to 125°C and has a max DC gate trigger voltage of 1.5V.
MAC228A10
MAC228A10 by Onsemi is a TRIAC with 800V repetitive peak off-state voltage and 8A max RMS on-state current. It operates b/w -40 to 110 °C, ideal for AC power control applications. Featuring a single configuration, it has a max DC gate trigger current of 5mA and uses 4-quadrant logic level triggering.
2N6073A
Motorola
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC997B8RL1
MAC997B8RL1 by Onsemi is a single TRIAC with 600V repetitive peak off-state voltage and 0.8A max RMS on-state current. It operates b/w -40 to 110 °C, ideal for controlling AC power in various applications like dimmers, motor speed controllers, and heating control systems.
SM25JZ41
Toshiba
The Toshiba SM25JZ41 is a single TRIAC with 3 terminals, capable of handling up to 25A RMS current and 600V off-state voltage. It operates b/w -40°C to 125°C, making it suitable for various AC applications requiring precise switching control. With a max gate trigger current of 50mA and trigger voltage of 3V, this device offers reliable performance in industrial settings.
BT136S-600D
Philips Semiconductors
TRIAC; Surface Mount: YES; Repetitive Peak Off-state Voltage: 600 V; Maximum On-state Voltage: 1.7 V; Maximum DC Gate Trigger Voltage: 1.5 V; Minimum Operating Temperature: -40 Cel;
BTA316-800B0
The NXP Semiconductors BTA316-800B0 is a TRIAC with 16A RMS current and 800V repetitive peak off-state voltage. It features a single configuration, through-hole terminals, and operates at up to 125°C. Ideal for applications requiring precise switching control in AC circuits.
BTA12-800C4G
BTA12-800C4G by Onsemi is a 4 QUADRANT LOGIC LEVEL TRIAC with 800V Repetitive Peak Off-state Voltage and 12A Max RMS On-state Current. It has a Max DC Gate Trigger Current of 25mA, making it suitable for applications requiring precise AC power control in various electronic devices.
MAC4DSN-001G
MAC4DSN-001G by Onsemi is a TRIAC with 3 terminals, max. RMS on-state current of 4A, and repetitive peak off-state voltage of 800V. It operates b/w -40 to 125 °C and has a max. DC gate trigger current of 10mA. Ideal for AC power control applications due to its high performance and reliability.
DTA10F
DTA10F by Onsemi is a TRIAC with 1.4V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 150°C, suitable for applications requiring up to 10A RMS on-state current and 500V repetitive peak off-state voltage.
CLA60MT1200NHR
Littelfuse
BT139-800E,127
BT139-800E,127 by NXP Semiconductors is a TRIAC with 800V repetitive peak off-state voltage and 16A max RMS on-state current. It has a trigger device type of 4 quadrant logic level TRIAC and can operate at temperatures up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
BT136-800E
Ween Semiconductors
TIC246E
TIC246E by Texas Instruments is a TRIAC with 16A RMS current, 500V repetitive peak off-state voltage, and 2.5V max DC gate trigger voltage. It operates b/w -40°C to 110°C, ideal for AC power control in various applications like lighting dimmers and motor speed controllers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAC97A6G
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
MAC97A8G
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Finish: TIN SILVER COPPER;
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
MAC97A8RL1G
MAC97A8RL1G by Onsemi is a single TRIAC with a max DC gate trigger current of 5 mA and repetitive peak off-state voltage of 600 V. It is ideal for applications requiring a 4 quadrant logic level TRIAC, such as in AC power control circuits. Operating temperature ranges from -40 to 110°C, making it suitable for various environments.
MAC97A6,412
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Elements: 1;
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 3;
MAC97A6RL1
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
MAC97A4RLRFG
4 QUADRANT LOGIC LEVEL TRIAC; Surface Mount: NO; Maximum Leakage Current: .1 mA; Maximum Operating Temperature: 110 Cel; Maximum Holding Current: 10 mA; Maximum DC Gate Trigger Current: 5 mA;
MAC97A6RLRF
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-609 Code: e1;
MAC97-8
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Shape: ROUND;
MAC97A6RLRFG
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Holding Current: 10 mA;
MAC97A6RLRPG
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-30 Code: O-PBCY-T3;
MAC97A4G
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Leakage Current: .1 mA;
MAC97A6RL1G
MAC97A6RLRP
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 110 Cel;
MAC97A6
MAC97A8RL1
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Repetitive Peak Off-state Voltage: 600 V;
MAC97A4RLRPG
4 QUADRANT LOGIC LEVEL TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 5 mA; Maximum DC Gate Trigger Voltage: 2 V; Maximum Holding Current: 10 mA; Maximum Operating Temperature: 110 Cel;
MAC97-8RLRM
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 10 mA; Minimum Critical Rate of Rise of Off-state Voltage: 25 V/us; Maximum RMS On-state Current: .6 A; Repetitive Peak Off-state Voltage: 600 V;
MAC97A8
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Additional Features: HIGH RELIABILITY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved