Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAC97A6RL1 by Onsemi is a single TRIAC with 3 terminals, ideal for AC applications. It has a max DC gate trigger current of 7mA and can handle a max RMS on-state current of 0.6A. With a repetitive peak off-state voltage of 400V, it operates b/w -40 to 110 °C, making it suitable for various switching applications.
Median Price
$0.116
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.092
1k+ parts
$0.077
10k+ parts
$0.068
DigiKey
$0.120
Verical
Vyrian
$0.064
Digiode
$0.072
Corohmni
Corphita
Component Stockers USA
$0.080
$0.070
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
TANS Electronics
UHIMA Technologies
The use of plastic/epoxy as the package body material provides durability and protection to the triac, making it resistant to external elements and ensuring a longer lifespan.
With a maximum DC gate trigger current of 7 mA, this triac is easy to control and trigger, providing reliable performance in various applications.
The single configuration simplifies the setup and integration of the triac, making it suitable for straightforward circuit designs and applications.
The round package shape offers versatility in mounting options, allowing for easy installation and compatibility with different types of circuit layouts.
The through-hole terminal form provides stability and secure connections during assembly, ensuring a reliable electrical connection for consistent performance.
With a low maximum leakage current of 0.1 mA, this triac minimizes power loss and maintains efficiency in operation, making it a cost-effective choice.
The triac's three terminals offer simplified circuit connections and compatibility with various wiring configurations, enhancing flexibility in application design.
The cylindrical package style provides a compact and space-saving design, making this triac suitable for applications where size constraints are a concern.
With a maximum operating temperature of 110 °C, this triac can withstand high heat environments, ensuring reliable performance in demanding conditions.
The wide temperature range of -40 °C to 110°C allows this triac to function effectively in both extreme cold and hot temperatures, making it versatile for various environments.
The terminal finish of tin silver copper provides corrosion resistance and optimal conductivity, ensuring stable electrical connections and longevity of the triac.
The bottom terminal position enhances ease of soldering and PCB mounting, facilitating efficient assembly and installation of the triac in electronic circuits.
With a maximum RMS on-state current of 0.6 A, this triac can handle moderate current loads, making it suitable for a wide range of switching applications.
The low maximum DC gate trigger voltage of 2.5 V provides efficient and reliable triggering of the triac, ensuring precise control and operation in electronic circuits.
The repetitive peak off-state voltage of 400 V allows this triac to withstand high voltage spikes and surges, making it a dependable choice for protecting electronic components.
The minimum critical rate of rise of commutation voltage of 5 V/us ensures fast and efficient switching of the triac, reducing power dissipation and improving performance.
The minimum critical rate of rise of off-state voltage of 25 V/us enhances the triac's ability to turn off quickly and reliably, reducing the risk of voltage spikes and interference.
With a maximum holding current of 10 mA, this triac maintains its on-state conduction even after the gate trigger signal is removed, ensuring stable performance in continuous operation.
Triode For Alternating Current (TRIAC) MAC97A6RL1 attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Additional Features:
Configuration:
Minimum Critical Rate of Rise of Commutation Voltage:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
MAC97A6RL1 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
Q6015L6
Littelfuse
Q6015L6 by Littelfuse is a TRIAC with 15A RMS on-state current, 600V repetitive peak off-state voltage, and 80mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
MAC4DSN-1G
MAC4DSN-1G by Onsemi is a TRIAC with 800V repetitive peak off-state voltage and 4A max RMS on-state current. It operates b/w -40 to 125 °C, with a gate trigger voltage of 1.3V and a max DC gate trigger current of 10mA. Ideal for AC power control applications requiring reliable switching capabilities.
T405-600T
STMicroelectronics T405-600T is a 4A TRIAC with 600V repetitive peak off-state voltage. It operates b/w -40°C to 125°C, suitable for various AC applications. Featuring a max DC gate trigger current of 5mA, it is designed as a single configuration device in a plastic/epoxy package with through-hole terminals.
BTB08-600BRG
STMicroelectronics' BTB08-600BRG is a 4-quadrant logic level TRIAC with 600V repetitive peak off-state voltage. It has a max RMS on-state current of 8A and can handle up to 50mA DC gate trigger current. Ideal for applications requiring precise AC power control in industrial settings.
BT137-600E/L01,127
NXP Semiconductors
BT137-600E/L01,127 by NXP Semiconductors is a TRIAC with a max RMS on-state current of 8A and a repetitive peak off-state voltage of 600V. It has a max DC gate trigger current of 10mA and can operate at temperatures ranging from -40 to 150°C. This device is commonly used in applications requiring AC power control.
BT138-800,127
BT138-800,127 by NXP Semiconductors is a TRIAC with 800V repetitive peak off-state voltage and 12A max RMS on-state current. It operates b/w -40 to 125 °C and has a trigger device type of 4 quadrant logic level TRIAC. Ideal for AC power control applications requiring high voltage and current handling capabilities.
MAC223A-6G
MAC223A-6G by Onsemi is a single TRIAC with 25A RMS current and 400V repetitive peak off-state voltage. Ideal for AC power control applications, it features a plastic/epoxy body, through-hole terminals, and a flange mount package style.
BTB12-600TW3G
BTB12-600TW3G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 12A max RMS on-state current, and 5mA DC gate trigger current. It is ideal for applications requiring precise AC power control in various electronic devices.
T1210-6G-TR
SNUBBERLESS TRIAC; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
BTA25-600CW3G
BTA25-600CW3G by Onsemi is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125 °C, ideal for snubberless applications requiring up to 35mA DC gate trigger current. The package style is flange mount with isolated case connection, suitable for various AC control systems.
BT139-800G
North American Philips Discrete Products Div
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 1.5 V; Maximum Operating Temperature: 120 Cel; Maximum Holding Current: 60 mA; Terminal Finish: Tin/Lead (Sn/Pb);
AVS12CB
STMicroelectronics' AVS12CB is a TRIAC with 600V repetitive peak off-state voltage and 12A max RMS on-state current. It operates b/w 0-125°C, ideal for AC power control applications. The package style is flange mount with through-hole terminals in a rectangular shape.
2N6075BG
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BT138-600E
BT138-600E by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage, 12A max RMS on-state current, and 1.5V max DC gate trigger voltage. It is used in applications requiring precise AC power control such as dimmers, motor speed controllers, and heating control systems.
BTA41-1200B
Continental Device India
TRIACs;
BTA204X-600C,127
Ween Semiconductors
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
DTA6E
DTA6E by Onsemi is a TRIAC with max on-state voltage of 1.5V, DC gate trigger current of 50mA, and leakage current of 2mA. It operates b/w -45 to 125 °C and has a max RMS on-state current of 6A. Ideal for AC applications requiring precise switching control.
MAC15A6G
MAC15A6G by Onsemi is a single TRIAC with 15A RMS on-state current and 400V repetitive peak off-state voltage. It operates b/w -40 to 125 °C, with a max DC gate trigger current of 50mA. Ideal for applications requiring precise AC power control in various electronic devices.
BTB16-600CWRG
BTB16-600CWRG by STMicroelectronics is a single TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125°C, suitable for snubberless applications requiring up to 35mA DC gate trigger current. The package style is flange mount with through-hole terminals, ideal for AC power control in various electronic devices.
BTB16H-600BW3G
4 QUADRANT LOGIC LEVEL TRIAC; Terminal Finish: Tin (Sn); JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAC97A6G
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
MAC97A8G
Rochester Electronics
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Finish: TIN SILVER COPPER;
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
MAC97A8RL1G
MAC97A8RL1G by Onsemi is a single TRIAC with a max DC gate trigger current of 5 mA and repetitive peak off-state voltage of 600 V. It is ideal for applications requiring a 4 quadrant logic level TRIAC, such as in AC power control circuits. Operating temperature ranges from -40 to 110°C, making it suitable for various environments.
MAC97A6,412
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Elements: 1;
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 3;
MAC97A4RLRFG
4 QUADRANT LOGIC LEVEL TRIAC; Surface Mount: NO; Maximum Leakage Current: .1 mA; Maximum Operating Temperature: 110 Cel; Maximum Holding Current: 10 mA; Maximum DC Gate Trigger Current: 5 mA;
MAC97A6RLRF
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-609 Code: e1;
MAC97-8
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Shape: ROUND;
MAC97A6RLRFG
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Holding Current: 10 mA;
MAC97A6RLRPG
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-30 Code: O-PBCY-T3;
MAC97A4G
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Leakage Current: .1 mA;
MAC97A6RL1G
MAC97A6RLRP
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 110 Cel;
MAC97A6
MAC97A8RL1
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Repetitive Peak Off-state Voltage: 600 V;
MAC97A4RLRPG
4 QUADRANT LOGIC LEVEL TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 5 mA; Maximum DC Gate Trigger Voltage: 2 V; Maximum Holding Current: 10 mA; Maximum Operating Temperature: 110 Cel;
MAC97-8RLRM
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 10 mA; Minimum Critical Rate of Rise of Off-state Voltage: 25 V/us; Maximum RMS On-state Current: .6 A; Repetitive Peak Off-state Voltage: 600 V;
MAC97A8
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Additional Features: HIGH RELIABILITY;
Motorola
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum On-state Voltage: 1.9 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved