Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DTB12G by Onsemi is a TRIAC with 1.3V max on-state voltage, 50mA max DC gate trigger current, and 2mA max leakage current. Ideal for AC power control applications, it has a max RMS on-state current of 12A and repetitive peak off-state voltage of 600V.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Native Components
$21.761
Northwest PG Solutions
$23.937
$21.543
Kulean Microsystems
Problanco Electronics
TANS Electronics
SupplyDigital Components
Corphita
UHIMA Technologies
Corohmni
Low on-state voltage results in less power loss and more efficient operation.
Allows for precise control and triggering of the device.
Low leakage current helps in reducing energy wastage and improving overall efficiency.
High operating temperature tolerance allows for reliable performance in various environments.
The TRIAC trigger device type offers versatile switching capabilities suitable for a wide range of applications.
With a high on-state current rating, this product can handle heavy loads with ease.
Low gate trigger voltage ensures efficient operation and precise control.
High off-state voltage rating allows for reliable and safe operation in high voltage applications.
Triode For Alternating Current (TRIAC) DTB12G attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Leakage Current:
Maximum On-state Voltage:
Maximum Operating Temperature:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Trigger Device Type:
DTB12G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Micropac Industries
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
Silicon Standard
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
BT134W-600E,115
NXP Semiconductors
The NXP Semiconductors BT134W-600E,115 is a TRIAC with 600V repetitive peak off-state voltage and 1A max RMS on-state current. It has a surface-mount package style, suitable for AC power control applications up to 120°C operating temperature. With a single configuration and dual terminals, it offers reliable performance in various electronic devices.
BT131-600
Inchange Semiconductor
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
MAC4DSM-001G
Onsemi
MAC4DSM-001G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a 10mA max DC gate trigger current, making it suitable for AC power control applications. With an operating temperature range of -40 to 125 °C, it is ideal for various industrial and consumer electronics devices.
BTA16-600BW
Continental Device India
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BT139B-600E,118
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BTA24-600CWRG
STMicroelectronics
BTA24-600CWRG by STMicroelectronics is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125°C, ideal for snubberless TRIAC applications. Featuring a max DC gate trigger current of 35mA, it is UL recognized and has an isolated case connection.
DTM6G
DTM6G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 6A max RMS on-state current, and -40 to 125 °C operating temperature range. Ideal for AC power control applications requiring precise gate trigger current and voltage specifications.
ACST1210-7T
ACST1210-7T by STMicroelectronics is a TRIAC with 3 terminals, max RMS current of 12A, and trigger voltage of 1V. It operates b/w -40 to 125 °C and has a max off-state voltage of 700V. Ideal for AC switching applications requiring up to 10mA gate trigger current.
BTA06-400CRG
BTA06-400CRG by STMicroelectronics is a TRIAC with 1.5V max on-state voltage, 25mA max DC gate trigger current, and 6A max RMS on-state current. It is ideal for applications requiring precise AC power control such as dimmer switches, motor speed controllers, and heating control systems.
BT139B-600G,118
BT139B-600G,118 by NXP Semiconductors is a TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It has a max DC gate trigger current of 50mA and operates b/w -40 to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
NYE08-10B6RL1G
NYE08-10B6RL1G by Onsemi is a TRIAC with max DC gate trigger current of 10mA, max leakage current of 0.2mA, and max operating temp of 125 °C. Ideal for applications requiring a 600V repetitive peak off-state voltage, such as lighting controls and motor speed controls.
MAC997A6RLRP
MAC997A6RLRP by Onsemi is a single TRIAC with 3 terminals, featuring a max DC gate trigger current of 5 mA and a max RMS on-state current of 0.8 A. Ideal for applications requiring precise AC power control, such as dimmer switches and motor speed controls.
BTA16-800BWRG
BTA16-800BWRG by STMicroelectronics is a single TRIAC with 800V repetitive peak off-state voltage and 16A max RMS on-state current. It operates b/w -40°C to 125°C, making it suitable for snubberless TRIAC applications requiring high power handling in industrial settings. The package style is flange mount with isolated case connection, meeting UL recognized standards.
Z0103MN0
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
2N5809
Texas Instruments
2N5809 by Texas Instruments is a TRIAC with max RMS current of 25A, DC gate trigger voltage of 4V, and repetitive peak off-state voltage of 600V. It is used in AC applications for controlling power flow in circuits with an operating temp range from -40 to 115°C.
Z0107MARLRFG
Z0107MARLRFG by Onsemi is a single TRIAC with 1A RMS on-state current, 600V repetitive peak off-state voltage, and 5mA max DC gate trigger current. It is used in applications requiring 4-quadrant logic level TRIACs for AC power control.
DTB12G
TG35C60
Sanrex
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
BTB16-800BW3G
BTB16-800BW3G by Onsemi is a TRIAC with 16A max RMS current, 800V repetitive peak off-state voltage, and 50mA max DC gate trigger current. Ideal for applications requiring precise AC power control such as dimmers, motor speed controllers, and heating control systems.
TIC263S
TIC263S by Texas Instruments is a TRIAC with 25A RMS current, 700V repetitive peak off-state voltage, and 125°C max operating temp. Ideal for AC power control in applications like lighting dimmers and motor speed controllers due to its 50mA gate trigger current and -40 to 125°C operating range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DTB10C
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 2 V; Maximum Leakage Current: 2 mA; Maximum RMS On-state Current: 10 A; Maximum DC Gate Trigger Current: 50 mA;
DTB10E
TRIAC; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; Maximum On-state Voltage: 1.3 V; Maximum Leakage Current: 2 mA; Repetitive Peak Off-state Voltage: 400 V;
DTB10F
TRIAC; Surface Mount: NO; Maximum On-state Voltage: 1.3 V; Repetitive Peak Off-state Voltage: 500 V; Maximum RMS On-state Current: 10 A; Maximum Leakage Current: 2 mA;
DTB10G
TRIAC; Surface Mount: NO; Maximum Leakage Current: 2 mA; Maximum DC Gate Trigger Voltage: 2 V; Repetitive Peak Off-state Voltage: 600 V; Maximum On-state Voltage: 1.3 V;
DTB12C
TRIAC; Surface Mount: NO; Maximum On-state Voltage: 1.3 V; Maximum DC Gate Trigger Current: 50 mA; Maximum DC Gate Trigger Voltage: 2 V; Repetitive Peak Off-state Voltage: 200 V;
DTB12E
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 2 V; Maximum On-state Voltage: 1.3 V; Maximum RMS On-state Current: 12 A; Maximum Leakage Current: 2 mA;
DTB12F
TRIAC; Surface Mount: NO; Maximum Leakage Current: 2 mA; Maximum RMS On-state Current: 12 A; Maximum DC Gate Trigger Current: 50 mA; Maximum DC Gate Trigger Voltage: 2 V;
DTB16C
TRIAC; Maximum Holding Current: 40 mA; Maximum DC Gate Trigger Voltage: 3 V; Non Repetitive Peak On-state Current: 150 A; Maximum Operating Temperature: 125 Cel; Maximum DC Gate Trigger Current: 50 mA;
DTB16E
TRIAC; Quick Connects Description: 0; Non Repetitive Peak On-state Current: 150 A; Maximum DC Gate Trigger Voltage: 3 V; Maximum Leakage Current: 2 mA; Maximum DC Gate Trigger Current: 50 mA;
DTB16F
TRIAC; Maximum DC Gate Trigger Voltage: 3 V; Maximum DC Gate Trigger Current: 50 mA; Quick Connects Description: 0; Screw Terminals Description: 0; No. of Elements: 1;
DTB16G
TRIAC; No. of Elements: 1; Maximum Operating Temperature: 125 Cel; Maximum Holding Current: 40 mA; Maximum DC Gate Trigger Current: 50 mA; Maximum Leakage Current: 2 mA;
Sanyo Electric
TRIAC; Surface Mount: NO; Maximum RMS On-state Current: 10 A; Maximum Operating Temperature: 125 Cel; Maximum Leakage Current: 2 mA; Terminal Finish: Tin/Lead (Sn/Pb);
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 2 V; Maximum Operating Temperature: 125 Cel; Maximum RMS On-state Current: 10 A; JESD-609 Code: e0;
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 50 mA; Maximum Leakage Current: 2 mA; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
TRIAC; Surface Mount: NO; Maximum Leakage Current: 2 mA; JESD-609 Code: e0; Maximum Operating Temperature: 125 Cel; Terminal Finish: Tin/Lead (Sn/Pb);
TRIAC; Surface Mount: NO; Maximum Leakage Current: 2 mA; JESD-609 Code: e0; Maximum RMS On-state Current: 12 A; Maximum DC Gate Trigger Current: 50 mA;
TRIAC; Surface Mount: NO; Terminal Finish: Tin/Lead (Sn/Pb); Maximum RMS On-state Current: 12 A; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e0;
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 50 mA; Maximum RMS On-state Current: 12 A; JESD-609 Code: e0; Maximum DC Gate Trigger Voltage: 2 V;
TRIAC; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e0; Repetitive Peak Off-state Voltage: 600 V; Maximum Leakage Current: 2 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved