Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BTA12-800CW3G by Onsemi is a single TRIAC with 800V repetitive peak off-state voltage and 12A max RMS on-state current. It has a snubberless design, 35mA max DC gate trigger current, and operates b/w -40 °C to 125°C. Ideal for AC power control applications requiring high voltage handling capabilities.
Median Price
$1.375
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$0.494
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$2.710
Rochester
$1.330
$1.100
$0.984
DigiKey
$1.660
Verical
$1.230
Digiode
$0.469
Vyrian
Chip Stock
ACDS - Activité Composants Distribution Service
Component Stockers USA
$0.430
$1.040
$0.940
Corphita
$0.445
Native Components
$0.746
Corohmni
$0.966
Advanced Electronics
$4.790
$4.359
$3.928
Microchip USA
$6.825
Continental Prestige Electronics
$0.919
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
TANS Electronics
Authorized Procurement Solutions
Kulean Microsystems
A-Z Elektronik GmbH
Problanco Electronics
Alle Elektronik GmbH
Cyclops Electronics Ltd (Excess)
SupplyDigital Components
Northwest PG Solutions
UHIMA Technologies
GreenTree Electronics
Provides durability and protection for the internal components of the TRIAC, making it suitable for various environmental conditions.
Allows for reliable triggering of the TRIAC, ensuring consistent performance in controlling alternating current.
Simplified design and installation process due to a single configuration, reducing complexity in circuit layouts.
Ensures minimal current flow in the off-state, contributing to energy efficiency and preventing undesired activation of the TRIAC.
Capable of handling high current loads, suitable for a wide range of applications requiring alternating current control.
Provides a high voltage rating for reliable performance and safety in applications with varying voltage requirements.
Ensures stable operation of the TRIAC, preventing unintended turn-off during operation.
Triode For Alternating Current (TRIAC) BTA12-800CW3G attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Case Connection:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
BTA12-800CW3G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
ECA2DHG4R7
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
BTA06-600BRG
STMicroelectronics
BTA06-600BRG by STMicroelectronics is a 4-quadrant logic level TRIAC with 600V repetitive peak off-state voltage and 6A max RMS on-state current. It has a max DC gate trigger current of 50mA and operates b/w -40°C to 125°C. Ideal for applications requiring precise AC power control in industrial settings.
BT131-600
Philips Semiconductors
TRIAC; Surface Mount: NO; Maximum RMS On-state Current: 1 A; Repetitive Peak Off-state Voltage: 600 V; Maximum Leakage Current: .5 mA; Maximum Operating Temperature: 125 Cel;
TIC236B
TIC236B by Texas Instruments is a TRIAC with 12A RMS current, 200V repetitive peak off-state voltage, and 50mA DC gate trigger current. It is used in applications requiring 4-quadrant logic level TRIACs for AC switching tasks. Operating temperature ranges from -40 to 110°C, making it suitable for various industrial and consumer electronics.
BTA25-800BW
BTA25-800BW by STMicroelectronics is a single TRIAC with 800V repetitive peak off-state voltage and 25A max RMS on-state current. It operates b/w -40 to 125 °C, with a max DC gate trigger voltage of 1.3V and a snubberless design for various AC applications. The package style is flange mount with isolated case connection, suitable for UL recognized standards.
BTA16-600BW
Rootech
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 50 mA; Maximum Operating Temperature: 125 Cel; Minimum Critical Rate of Rise of Off-state Voltage: 1000 V/us; Maximum DC Gate Trigger Voltage: 1.3 V;
Z0405MF1AA2
Z0405MF1AA2 by STMicroelectronics is a TRIAC with 4A RMS current, 600V repetitive peak off-state voltage, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control like dimmers, motor speed controllers, and heating regulators.
MAC4DCM-1G
MAC4DCM-1G by Onsemi is a TRIAC with 500mA DC gate trigger current, 4A RMS on-state current, and 600V repetitive peak off-state voltage. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
T835H-6T
T835H-6T by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage, 8A max RMS on-state current, and 35mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmer switches, motor speed controls, and heating controllers.
ACST610-8R
ACST610-8R by STMicroelectronics is a TRIAC with 800V repetitive peak off-state voltage, 6A max RMS on-state current, and 10mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
T2800D
T2800D by Onsemi is a single TRIAC with 8A RMS on-state current, 25mA DC gate trigger current, and 400V repetitive peak off-state voltage. Ideal for applications requiring precise AC power control in devices such as dimmers, motor speed controllers, and heating control systems.
BT137S-600E
NXP Semiconductors
The NXP Semiconductors BT137S-600E is a single TRIAC with 600V repetitive peak off-state voltage and 8A max RMS on-state current. It has a 10mA max DC gate trigger current, making it suitable for applications requiring precise AC power control in various electronic devices. The device operates b/w -40 to 125 °C and features gull wing terminals for easy surface mount installation.
BTA204X-600C,127
Ween Semiconductors
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BT139X-600E,127
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA06-400BRG
BTA06-400BRG by STMicroelectronics is a TRIAC with 1.6V max on-state voltage, 50mA max DC gate trigger current, and 6A max RMS on-state current. It operates b/w -40°C to 110°C and has a repetitive peak off-state voltage of 400V. Ideal for AC power control applications requiring precise switching capabilities.
DTA10G
DTA10G by Onsemi is a TRIAC with 1.4V max on-state voltage, 30mA max DC gate trigger current, and 2mA max leakage current. It operates b/w -40 °C to 150°C, with a max RMS on-state current of 10A and repetitive peak off-state voltage of 600V. Ideal for AC power control applications.
T850H-6G-TR
T850H-6G-TR by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage, 8A max RMS on-state current, and 50mA max DC gate trigger current. It is used in AC power control applications due to its single configuration, small outline package style, and surface mount capability.
MAC16HCDG
MAC16HCDG by Onsemi is a TRIAC with 16A RMS on-state current, 400V repetitive peak off-state voltage, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmer switches, motor speed controls, and heating controllers.
BTA25H-600CW3G
BTA25H-600CW3G by Onsemi is a 4 quadrant logic level TRIAC with max RMS on-state current of 25A and repetitive peak off-state voltage of 600V. Ideal for AC power control applications, it has a max operating temp of 150 °C and min operating temp of -40°C.
MAC97A8
MAC97A8 by Onsemi is a single TRIAC with a max RMS on-state current of 0.6A and repetitive peak off-state voltage of 600V. It is designed for applications requiring a trigger device with 4 quadrant logic level capabilities, such as AC power control in various electronic devices.
BT136S-600D
BT136S-600D by NXP Semiconductors is a single TRIAC with a max RMS on-state current of 4A and repetitive peak off-state voltage of 600V. It is designed for applications requiring a trigger device with a max DC gate trigger current of 5mA, such as in AC power control circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTA12-600BRG
BTA12-600BRG by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage, 12A max RMS on-state current, and 50mA max DC gate trigger current. It is used in applications requiring isolated case connection, such as motor control and lighting systems.
New Jersey Semiconductor Products
BTA16-600BWRG
BTA16-600BWRG by STMicroelectronics is a single TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It is used in snubberless applications, has a max operating temperature of 125°C, and is UL recognized for various AC control systems.
BTA16-600BRG
BTA16-600BRG by STMicroelectronics is a single TRIAC with 3 terminals and a max RMS on-state current of 16A. It operates in temperatures ranging from -40 to 125°C, with a max DC gate trigger voltage of 1.3V. Ideal for applications requiring precise control over AC power switching.
BTA16-800BWRG
BTA16-800BWRG by STMicroelectronics is a single TRIAC with 800V repetitive peak off-state voltage and 16A max RMS on-state current. It operates b/w -40°C to 125°C, making it suitable for snubberless TRIAC applications requiring high power handling in industrial settings. The package style is flange mount with isolated case connection, meeting UL recognized standards.
BTA16-800CWRG
BTA16-800CWRG by STMicroelectronics is a single TRIAC with 3 terminals and a max RMS on-state current of 16A. It operates b/w -40 to 125°C, has an isolated case connection, and a repetitive peak off-state voltage of 800V. Ideal for snubberless TRIAC applications requiring high reliability and UL recognition.
BTA16-600BW3G
Littelfuse
BTA12-600BW3G
BTA16-600CWRG
BTA16-600CWRG by STMicroelectronics is a single TRIAC with 16A max RMS on-state current and 600V repetitive peak off-state voltage. It is used as a snubberless TRIAC in applications requiring AC power control, such as dimmer switches and motor speed controllers. Operating temperature ranges from -40°C to 125°C for versatile use.
BTA12-600BWRG
BTA12-600BWRG by STMicroelectronics is a single TRIAC with 12A max RMS on-state current, 1.3V max DC gate trigger voltage, and 600V repetitive peak off-state voltage. It is used in applications requiring snubberless TRIACs for AC power control at temperatures ranging from -40°C to 125°C.
BTA12-600CWRG
BTA12-600SWRG
BTA12-600CRG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved