Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BTA16-600BW3G by Onsemi is a single TRIAC with 16A max RMS on-state current and 600V repetitive peak off-state voltage. It is used in snubberless applications, has a max operating temperature of 125°C, and features a plastic/epoxy package body material.
Median Price
$2.250
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$1.341
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
Farnell
$3.310
$2.500
$1.680
DigiKey
$4.540
$2.149
$1.853
Mouser Electronics
Element14
$6.580
$3.340
$3.140
Rochester
$1.330
$1.100
$0.984
Verical
$1.375
$1.230
Future Electronics
$1.570
$1.550
Digiode
$1.036
Nova Conductors
$1.990
Bristol Electronics
$1.395
Chip Stock
Vyrian
VNN
ComSIT Distribution GmbH
GSS - Global Semi Support
Ampacity Inc.
$0.930
Corphita
$0.981
Corohmni
$1.719
Aranea Global
$1.950
$1.872
Argo Parts USA
Semicontronic
$2.020
$1.970
$1.959
Aztec Data Supply Inc.
$2.818
Microchip USA
$15.340
Continental Prestige Electronics
$0.919
TANS Electronics
Kulean Microsystems
Problanco Electronics
Perfect Parts
Glotronic Ltd.
SupplyDigital Components
Authorized Procurement Solutions
UHIMA Technologies
Kepictronics
Provides durability and protection for the internal components of the TRIAC, ensuring a longer lifespan.
Allows for efficient triggering of the TRIAC, ensuring reliable performance under different operating conditions.
Simplifies the wiring and setup process, making it easier to integrate this TRIAC into different electrical systems.
Ensures minimal power loss when the TRIAC is in the off-state, leading to energy efficiency.
Can withstand high temperatures, making it suitable for a wide range of industrial applications.
Triode For Alternating Current (TRIAC) BTA16-600BW3G attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Case Connection:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
BTA16-600BW3G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Design/Specification - SMC Packaged Products 30/Nov/2016 Updated Polarity ID 30/Nov/2016
PCN Assembly/Origin - Manufacture Location and Obs 21/Dec/2017
PCN Packaging - Multiple Devices Packaging/Quantity 28/Apr/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
FT232RQ-REEL
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
General Diode
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
TIC225S
Texas Instruments
TIC225S by Texas Instruments is a TRIAC with 15mA DC Gate Trigger Current, 8A RMS On-state Current, and 700V Repetitive Peak Off-state Voltage. It operates b/w -40°C to 110°C, ideal for AC power control in various applications like lighting dimmers and motor speed controllers.
MCR08DT1
Onsemi
MCR08DT1 by Onsemi is a TRIAC with max on-state voltage of 1.7V, DC gate trigger current of 0.2mA, and RMS on-state current of 0.8A. Ideal for AC power control applications due to its high operating temp range (-40 to 110 °C) and repetitive peak off-state voltage of 400V.
MAC15-10
MAC15-10 by Onsemi is a TRIAC with 15A RMS on-state current, 800V repetitive peak off-state voltage, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
MAC12HCN
MAC12HCN by Onsemi is a TRIAC with 800V repetitive peak off-state voltage and 12A max RMS on-state current. It operates b/w -40 °C to 125°C, with a trigger voltage of 1.5V and gate trigger current of 50mA. Ideal for AC power control applications requiring high reliability and performance in a through-hole package.
MAC97A6,412
NXP Semiconductors' MAC97A6,412 is a TRIAC with 400V repetitive peak off-state voltage and 0.6A max RMS on-state current. It operates b/w -40 to 125°C, suitable for AC power control in various applications like dimmers and motor speed controllers.
Z0107MN5AA4
Z0107MN5AA4 by STMicroelectronics is a 4-quadrant logic level TRIAC with max. DC gate trigger current of 7mA and max. RMS on-state current of 1A. It operates b/w -40 to 125°C, suitable for AC power control applications like dimmers and motor speed controllers.
BT139B-600E,118
BT139B-600E,118 by NXP Semiconductors is a TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It has a max DC gate trigger current of 10mA and operates b/w -40 to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
Q6015R5
Teccor Electronics
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
Z0107MARL1G
Z0107MARL1G by Onsemi is a single TRIAC with 600V repetitive peak off-state voltage, 1A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control in various electronic devices.
DTA6-N
DTA6-N by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 6A max RMS on-state current. It is used as a trigger device in applications requiring precise AC power control, such as dimmer switches and motor speed controllers.
MAC97A8RL1G
MAC97A8RL1G by Onsemi is a single TRIAC with a max DC gate trigger current of 5 mA and repetitive peak off-state voltage of 600 V. It is ideal for applications requiring a 4 quadrant logic level TRIAC, such as in AC power control circuits. Operating temperature ranges from -40 to 110°C, making it suitable for various environments.
DTA2C
DTA2C by Onsemi is a TRIAC with 2A RMS on-state current, 15mA DC gate trigger current, and 200V repetitive peak off-state voltage. It operates b/w -40 °C to 110°C, making it suitable for AC power control applications like dimmers and motor speed controllers.
BTA12-800BWRG
BTA12-800BWRG by STMicroelectronics is a single TRIAC with 800V repetitive peak off-state voltage, 12A max RMS on-state current, and 1.3V max DC gate trigger voltage. It is used in snubberless TRIAC applications for AC power control due to its isolated case connection and -40°C to 125°C operating temperature range.
BTB16-600CW3G
BTB16-600CW3G by Onsemi is a TRIAC with 16A RMS on-state current, 600V repetitive peak off-state voltage, and 35mA max DC gate trigger current. It is ideal for applications requiring precise AC power control such as dimmer switches, motor speed control, and heating regulation.
SYAL344
SYAL344 by Onsemi is a TRIAC with 1.8V max on-state voltage, 40mA max DC gate trigger current, and 1mA max leakage current. It has a repetitive peak off-state voltage of 800V and min critical rate of rise of commutation voltage at 5 V/us. This device is ideal for applications requiring high holding current up to 50000 mA in various AC power control systems.
2N6075BG
Littelfuse
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BT139B-600G,118
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BTA40-800B
Continental Device India
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
MAC97A8RLRMG
MAC97A8RLRMG by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 0.6A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control in consumer electronics, lighting systems, and industrial equipment.
TIC226N
TIC226N by Texas Instruments is a TRIAC with 8A RMS on-state current, 800V repetitive peak off-state voltage, and 110°C max operating temp. Ideal for AC power control applications due to its 50mA max DC gate trigger current and -40°C min operating temp.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTA12-600BRG
BTA12-600BRG by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage, 12A max RMS on-state current, and 50mA max DC gate trigger current. It is used in applications requiring isolated case connection, such as motor control and lighting systems.
New Jersey Semiconductor Products
BTA16-600BWRG
BTA16-600BWRG by STMicroelectronics is a single TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It is used in snubberless applications, has a max operating temperature of 125°C, and is UL recognized for various AC control systems.
BTA16-600BRG
BTA16-600BRG by STMicroelectronics is a single TRIAC with 3 terminals and a max RMS on-state current of 16A. It operates in temperatures ranging from -40 to 125°C, with a max DC gate trigger voltage of 1.3V. Ideal for applications requiring precise control over AC power switching.
BTA16-800BWRG
BTA16-800BWRG by STMicroelectronics is a single TRIAC with 800V repetitive peak off-state voltage and 16A max RMS on-state current. It operates b/w -40°C to 125°C, making it suitable for snubberless TRIAC applications requiring high power handling in industrial settings. The package style is flange mount with isolated case connection, meeting UL recognized standards.
BTA16-800CWRG
BTA16-800CWRG by STMicroelectronics is a single TRIAC with 3 terminals and a max RMS on-state current of 16A. It operates b/w -40 to 125°C, has an isolated case connection, and a repetitive peak off-state voltage of 800V. Ideal for snubberless TRIAC applications requiring high reliability and UL recognition.
BTA16-600BW3G
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA12-600BW3G
BTA16-600CWRG
BTA16-600CWRG by STMicroelectronics is a single TRIAC with 16A max RMS on-state current and 600V repetitive peak off-state voltage. It is used as a snubberless TRIAC in applications requiring AC power control, such as dimmer switches and motor speed controllers. Operating temperature ranges from -40°C to 125°C for versatile use.
BTA12-600BWRG
BTA12-600BWRG by STMicroelectronics is a single TRIAC with 12A max RMS on-state current, 1.3V max DC gate trigger voltage, and 600V repetitive peak off-state voltage. It is used in applications requiring snubberless TRIACs for AC power control at temperatures ranging from -40°C to 125°C.
BTA12-600CWRG
BTA12-600SWRG
BTA12-600CRG
BTA16-600BW
BTA16600B
Loras Industries
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved