Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Z0107MAG by Onsemi is a single TRIAC with 3 terminals, max. DC gate trigger current of 5mA, and max. RMS on-state current of 1A. It operates b/w -40 to 125 °C, ideal for applications requiring a 4 quadrant logic level TRIAC like motor control systems or lighting dimmers.
Median Price
$1.230
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$0.295
1k+ parts
$0.189
10k+ parts
-
Digiode
$1.168
Chip Stock
Vyrian
Flip Electronics
Corphita
$1.107
Corohmni
Advanced Electronics
$4.905
$4.464
$4.022
AZTECH Wire
$9.250
Perfect Parts
Kulean Microsystems
Problanco Electronics
Authorized Procurement Solutions
GreenTree Electronics
SupplyDigital Components
UHIMA Technologies
TANS Electronics
PLASTIC/EPOXY material ensures durability and reliability, making this TRIAC suitable for long-term use.
Low gate trigger current ensures efficient operation and minimal power consumption.
Single configuration simplifies the design and installation process, making it user-friendly.
Round shape allows for easy integration into various electronic setups and systems.
Wire terminals provide secure connections and ease of installation.
Low leakage current ensures minimal power loss and enhances overall efficiency.
Three terminals provide flexibility in circuit connections and compatibility with different setups.
Cylindrical package style offers compactness and ease of mounting in various devices.
High operating temperature range ensures reliability in diverse environmental conditions.
4-quadrant logic level TRIAC provides precise control and functionality in AC applications.
Wide temperature range allows for usage in both extreme cold and hot environments.
TIN SILVER COPPER terminal finish offers excellent conductivity and corrosion resistance.
Bottom terminal position facilitates easy and secure connections in electronic circuits.
High on-state current rating ensures reliable performance in demanding electrical applications.
Low gate trigger voltage allows for efficient switching and control of the TRIAC.
High off-state voltage rating provides protection against voltage spikes and surges.
Fast rate of rise of off-state voltage ensures quick response and protection against voltage transients.
Good holding current rating ensures stable operation and reliable latching of the TRIAC.
High peak reflow temperature allows for safe and reliable soldering during manufacturing processes.
Triode For Alternating Current (TRIAC) Z0107MAG attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Additional Features:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
Z0107MAG Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Obsolescence/ EOL - Multiple Devices 08/Nov/2014 Multiple Devices Revision 26/Nov/2014
PCN Design/Specification - Cu wire conversion/New compound 26/Jul/2013
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
General Instrument
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
2N6349G
2N6349G by Onsemi is a TRIAC with 800V repetitive peak off-state voltage and 8A max RMS on-state current. It operates b/w -40 °C to 125°C, suitable for 4 quadrant logic level TRIAC applications in various industries. The package style is flange mount with through-hole terminals.
Z0107MARLRFG
Z0107MARLRFG by Onsemi is a single TRIAC with 1A RMS on-state current, 600V repetitive peak off-state voltage, and 5mA max DC gate trigger current. It is used in applications requiring 4-quadrant logic level TRIACs for AC power control.
T2500DFP
T2500DFP by Onsemi is a TRIAC with 2V max on-state voltage, 10mA max DC gate trigger current, and 6A max RMS on-state current. Ideal for AC power control applications due to its high operating temperature range (-40 °C to 100°C) and low leakage current of 2mA.
MAC16CM
MAC16CM by Onsemi is a TRIAC with 16A RMS on-state current, 600V repetitive peak off-state voltage, and 35mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmer switches, motor speed controls, and heating controllers.
Q6015R5TP
Littelfuse
The Littelfuse Q6015R5TP is a TRIAC with 15A RMS on-state current, 600V repetitive peak off-state voltage, and 50mA max DC gate trigger current. Ideal for applications requiring AC switching such as dimmers, motor speed controllers, and heating control systems.
BTA204X-600C,127
Ween Semiconductors
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTB26-600B
STMicroelectronics' BTB26-600B is a TRIAC with 600V repetitive peak off-state voltage and 30A max RMS on-state current. It operates b/w -40°C to 110°C, with a max DC gate trigger voltage of 3V. Ideal for applications requiring precise AC power control in various electronic devices.
MAC210A8FP
MAC210A8FP by Onsemi is a single TRIAC with 10A RMS on-state current and 600V repetitive peak off-state voltage. Ideal for 4-quadrant logic level triggering applications, it operates b/w -40 to 125 °C and has UL recognition.
BTB16-800CW3G
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
2N6071AG
2N6071AG by Onsemi is a TRIAC with 4A RMS on-state current, 20mA DC gate trigger current, and 200V repetitive peak off-state voltage. It is used in applications requiring isolated case connection, such as motor control and lighting systems.
BTA25H-600CW3G
BTA25H-600CW3G by Onsemi is a 4 quadrant logic level TRIAC with max RMS on-state current of 25A and repetitive peak off-state voltage of 600V. Ideal for AC power control applications, it has a max operating temp of 150 °C and min operating temp of -40°C.
BTA12-600CW3G
BTA06-400BRG
BTA06-400BRG by STMicroelectronics is a TRIAC with 1.6V max on-state voltage, 50mA max DC gate trigger current, and 6A max RMS on-state current. It operates b/w -40°C to 110°C and has a repetitive peak off-state voltage of 400V. Ideal for AC power control applications requiring precise switching capabilities.
SM2LZ47
Toshiba
The Toshiba SM2LZ47 is a TRIAC with 3 terminals, max. DC gate trigger current of 10mA, and max. RMS on-state current of 2A. Ideal for AC applications requiring precise switching control in temperatures ranging from -40 to 125°C.
BT137S-600E/T3
BT137S-600E/T3 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage, 8A max RMS on-state current, and 10mA max DC gate trigger current. It is ideal for applications requiring precise AC power control in various electronic circuits.
MAC15SDG
MAC15SDG by Onsemi is a single TRIAC with 3 terminals, capable of handling up to 15A RMS on-state current and 400V repetitive peak off-state voltage. It operates b/w -40 °C to 110°C, making it suitable for various AC applications requiring precise switching control at low DC gate trigger current of 5mA.
DTC10N
DTC10N by Onsemi is a TRIAC with 1.5V max on-state voltage, 30mA max DC gate trigger current, and 10A max RMS on-state current. Ideal for AC power control applications due to its TRIAC trigger device type and 200V repetitive peak off-state voltage capability.
2N6348AG
2N6348AG by Onsemi is a TRIAC with 600V repetitive peak off-state voltage, 12A max RMS on-state current, and 125mA max DC gate trigger current. It's used in applications requiring 4 quadrant logic level TRIACs for AC switching tasks at temperatures ranging from -40 to 125°C.
Q6040K7TP
Q6040K7TP by Littelfuse is a single TRIAC with 3 terminals, featuring a max RMS on-state current of 40A and repetitive peak off-state voltage of 600V. Ideal for applications requiring AC power control, such as dimmers, motor speed controllers, and heating control systems.
Z0109MUF
STMicroelectronics Z0109MUF is a 4 QUADRANT LOGIC LEVEL TRIAC with 600V repetitive peak off-state voltage and 1A max RMS on-state current. It operates b/w -40°C to 125°C, suitable for AC power control applications. With surface mount capability and low gate trigger voltage of 1.3V, it offers efficient performance in various electronic designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Z0103MN5AA4
Z0103MN5AA4 by STMicroelectronics is a 4-quadrant logic level TRIAC with 600V repetitive peak off-state voltage, 1A max RMS on-state current, and 5mA max DC gate trigger current. Ideal for AC power control applications in small outline packages with surface mount capability.
Z0107MN,135
Z0107MN,135 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 1A max RMS on-state current. It has a 1.3V max DC gate trigger voltage and operates b/w -40°C to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
Z0107MN
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
Philips Semiconductors
TRIAC; Surface Mount: YES; Maximum Operating Temperature: 125 Cel; Terminal Finish: Matte Tin (Sn); Maximum On-state Voltage: 1.6 V; Maximum Leakage Current: .5 mA;
Z0107MN0,135
TRIAC; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Minimum Critical Rate of Rise of Off-state Voltage: 100 V/us; Maximum Leakage Current: .5 mA; Maximum DC Gate Trigger Voltage: 1.3 V;
TRIAC; Surface Mount: YES; Maximum Leakage Current: .5 mA; Minimum Operating Temperature: -40 Cel; Minimum Critical Rate of Rise of Commutation Voltage: .5 V/us; Maximum DC Gate Trigger Current: 5 mA;
Z0103NN5AA4
Z0107MNT1G
Z0107NN5AA4
Z0107MN0
Z0103MNT1G
Z0109MN5AA4
Z0109MN5AA4 by STMicroelectronics is a 4-quadrant logic level TRIAC with 600V repetitive peak off-state voltage, 1A max RMS on-state current, and 10mA max DC gate trigger current. Ideal for AC power control applications in smart home devices, lighting systems, and industrial automation due to its small outline package and dual terminal position.
Z0107MA5AL2
Z0107MA5AL2 by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage, 1A max RMS on-state current, and 7mA max DC gate trigger current. Ideal for applications requiring precise AC power control such as dimmers, motor speed controllers, and heating control systems.
Z0103MUF
Z0103MUF by STMicroelectronics is a 4 QUADRANT LOGIC LEVEL TRIAC with a max RMS On-state Current of 1A and Repetitive Peak Off-state Voltage of 600V. It operates b/w -40 to 125 °C and has a Max DC Gate Trigger Voltage of 1.3V. Ideal for applications requiring precise AC power control in various electronic devices.
4 QUADRANT LOGIC LEVEL TRIAC; Surface Mount: YES; Maximum RMS On-state Current: 1 A; Maximum DC Gate Trigger Current: 10 mA; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel;
Z0107MN5AA4
Z0107MN5AA4 by STMicroelectronics is a 4-quadrant logic level TRIAC with max. DC gate trigger current of 7mA and max. RMS on-state current of 1A. It operates b/w -40 to 125°C, suitable for AC power control applications like dimmers and motor speed controllers.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved