Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CPH6411 by Onsemi is a N-CHANNEL Power FET with 6A max drain current and 1.6W power dissipation. Ideal for applications requiring high efficiency in a compact design, such as power management systems or motor control circuits. Operating in enhancement mode, it offers reliable performance up to 150 °C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Northwest PG Solutions
$2.632
Metaverse IC Inc.
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Problanco Electronics
Corphita
UHIMA Technologies
Native Components
$2.321
Corohmni
N-CHANNEL FETs typically have lower ON resistance and faster switching speeds compared to P-CHANNEL FETs, making them suitable for high-performance applications.
Surface mount packaging allows for easy integration onto printed circuit boards, saving space and enabling high-density designs.
Enhancement mode FETs are normally off devices, providing added safety and control in electronic circuits.
The high maximum drain current capability allows for handling larger loads or currents, making this FET suitable for power applications.
The high maximum power dissipation rating ensures that the FET can handle heat dissipation effectively, improving reliability in high-power applications.
Metal-oxide semiconductor FETs offer high input impedance, low input capacitance, and good noise performance, making them suitable for a wide range of applications.
The high maximum operating temperature allows for reliable operation in demanding environments, ensuring consistent performance under varying thermal conditions.
Power Field Effect Transistors (FET) CPH6411 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Configuration:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Field Effect Transistor Technology:
No. of Elements:
Operating Mode:
Maximum Operating Temperature:
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Sub-Category:
Surface Mount:
CPH6411 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Goodwork Semiconductor
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Comchip Technology
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
AOD4185
Alpha & Omega Semiconductor
AOD4185 by Alpha & Omega Semiconductor is a P-CHANNEL FET with 40V DS Breakdown Voltage, 115A IDM, and 0.015 ohm RDS(ON). Ideal for power management applications requiring high drain current capabilities in a compact SMALL OUTLINE package.
IRF7425TRPBF-1
Infineon Technologies
IRF7425TRPBF-1 by Infineon is a P-channel Power FET with 20V DS breakdown voltage, 15A max drain current, and 0.0082 ohm RDS(on). It's used in power management applications due to its small outline package, 60A pulsed drain current, and -55 to +150°C operating temperature range.
STD12NF06LT4
STD12NF06LT4 by STMicroelectronics is an N-channel power FET with a 60V DS breakdown voltage and 48A max pulsed drain current. It is used for switching applications, operates in enhancement mode, and has a built-in diode. The transistor features a 0.12 ohm max drain-source resistance and can handle up to 30W of power dissipation.
IRFB4227PBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 330 W; Case Connection: DRAIN; Transistor Element Material: SILICON;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
IRLML0100TRPBF
IRLML0100TRPBF by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for SWITCHING applications. It features a max drain current of 1.6A, 0.22 ohm on-resistance, and 1.3W power dissipation in a SMALL OUTLINE package. Operating from -55 to 150 °C, it's suitable for various ENHANCEMENT MODE switching tasks.
IRLML2502
IRLML2502 by International Rectifier is a N-CHANNEL FET with 20V DS breakdown voltage and 4.2A max drain current, ideal for switching applications. It features a built-in diode, operates in enhancement mode, and has a max power dissipation of 1.3W. This MOSFET is surface mountable with GULL WING terminals and can handle up to 33A pulsed drain current.
FDMS86163P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 100 V;
FQD2N100TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Minimum DS Breakdown Voltage: 1000 V; Avalanche Energy Rating (EAS): 160 mJ;
SI7315DN-T1-GE3
Vishay Intertechnology
Vishay Intertechnology's SI7315DN-T1-GE3 is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a 10A IDM and 0.315 ohm RDS(on), this MOSFET operates in ENHANCEMENT MODE with a 9.8mJ EAS rating. Suitable for surface mount designs, it has a SQUARE package shape and DUAL terminal position.
IRF7493TRPBF-1
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1;
AUIRF3205ZSTRL
AUIRF3205ZSTRL by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, 440A IDM, and 0.0065 ohm RDS(on). Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE at up to 175°C, making it suitable for high-power tasks.
IRF840PBF
Vishay Intertechnology's IRF840PBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. Ideal for SWITCHING applications, it features 32A IDM and 510mJ EAS ratings. The transistor operates in ENHANCEMENT MODE with 0.85 ohm RDS(on) and can handle up to 125W power dissipation.
BSC067N06LS3GXT
BSC067N06LS3GXT by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a max IDM of 200A and 0.0067 ohm RDS(on), operating in enhancement mode up to 150°C. This MOSFET comes in a small outline package with built-in diode, suitable for high-power electronic designs.
IRF9530
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Qualification: Not Qualified; Maximum Drain Current (ID): 12 A;
SQJ431EP-T1_GE3
Vishay Intertechnology's SQJ431EP-T1_GE3 is a P-CHANNEL FET with 200V DS Breakdown Voltage, 40A IDM, and 0.221 ohm RDS(ON). Ideal for power applications requiring high drain current and low on-resistance in a small outline package.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
ZVN2110GTA
ZVN2110GTA by Diodes Inc. is a N-CHANNEL power FET with 100V DS breakdown voltage, 6A IDM, and 4 ohm RDS(on). It is used for switching applications in small outline packages.
IRF540PBF
Vishay Intertechnology's IRF540PBF is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 110A IDM, 230mJ EAS, and 0.077 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 150W and can withstand temperatures up to 175°C.
FQP47P06
FQP47P06 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 47A Drain Current. Ideal for SWITCHING applications, it features an IDM of 188A, EAS of 820mJ, and 0.026 ohm RDS(ON). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 160W at 175°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CPH6354-TL-W
Onsemi's CPH6354-TL-W is a P-CHANNEL FET with 60V DS breakdown voltage, 16A IDM, and 0.1 ohm RDS(on). Ideal for SWITCHING applications in ENHANCEMENT MODE, it features GULL WING terminals and operates in SMALL OUTLINE package style.
CPH6350-TL-W
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Tin/Bismuth (Sn/Bi); Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e6;
Sanyo Semiconductor
Power Field-Effect Transistors;
CPH6445-TL-W
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; No. of Elements: 1; Peak Reflow Temperature (C): 260;
CPH6355-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Drain-Source On Resistance: .169 ohm; Maximum Pulsed Drain Current (IDM): 12 A;
CPH6355-TL-H
CPH6355-TL-H by Onsemi is a P-CHANNEL power FET with a max drain current of 3A and max power dissipation of 1.6W. It is suitable for applications requiring high power and operates at a max temperature of 150°C.
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Terminal Finish: TIN BISMUTH; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
CPH6350-TL-E
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e6; Terminal Finish: Tin/Bismuth (Sn/Bi);
CPH6413
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Drain Current (Abs) (ID): 5 A; Maximum Drain Current (ID): 5 A;
CPH6337
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; JESD-30 Code: R-PDSO-G6; Terminal Position: DUAL;
CPH6341-TL-E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
CPH6414
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
CPH6347-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (Abs) (ID): 6 A;
CPH6412
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): 6 A;
CPH6337-TL-W
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6;
CPH6341-TL-W
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
CPH6354-TL-H
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Terminal Finish: TIN BISMUTH; Maximum Drain Current (ID): 4 A;
CPH6315
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Transistor Application: SWITCHING; Minimum DS Breakdown Voltage: 20 V;
CPH6337-TL-E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Moisture Sensitivity Level (MSL): 1;
CPH6443-TL
Sanyo Electric
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Drain Current (Abs) (ID): 6 A; Maximum Drain Current (ID): 6 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved