Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CPH6355-TL-H by Onsemi is a P-CHANNEL power FET with a max drain current of 3A and max power dissipation of 1.6W. It is suitable for applications requiring high power and operates at a max temperature of 150°C.
Median Price
$0.140
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.159
1k+ parts
$0.132
10k+ parts
$0.117
Farnell
$0.126
Verical
$0.147
DigiKey
Mouser Electronics
$0.104
Digiode
$0.124
Bristol Electronics
$0.480
$0.192
$0.134
$0.125
DigiKey Marketplace
Vyrian
Cyclops Electronics Ltd
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Nova Conductors
Ampacity Inc.
$0.088
Corohmni
Corphita
Aztec Data Supply Inc.
$1.178
Continental Prestige Electronics
$0.094
Kepictronics
Metaverse IC Inc.
Lixinc
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
Problanco Electronics
Authorized Procurement Solutions
SupplyDigital Components
TANS Electronics
Argo Parts USA
Perfect Parts
UHIMA Technologies
Bastille Electronics
P-CHANNEL - This specification indicates that the power field effect transistor belongs to the P-channel type, which makes it suitable for certain applications where the P-channel configuration is required.
SINGLE - The single configuration of this power field effect transistor simplifies its design and makes it easier to integrate into electronic circuits.
YES - With the ability to be surface mounted, this power field effect transistor offers convenience and ease of installation, making it ideal for compact and space-constrained applications.
1 - The presence of a single element ensures simplicity and straightforward operation of the power field effect transistor.
3 A - With a maximum drain current of 3 A, this power field effect transistor can handle high-power applications effectively and reliably.
1.6 W - The maximum power dissipation of 1.6 W ensures that the power field effect transistor can function efficiently without the risk of overheating.
METAL-OXIDE SEMICONDUCTOR - This advanced technology ensures reliable performance and enhanced efficiency in various power applications.
150 °C - The capability to operate at a maximum temperature of 150°C allows this power field effect transistor to withstand demanding and high-temperature environments.
TIN BISMUTH - The tin bismuth terminal finish provides excellent solderability and ensures strong and reliable connections, enhancing the overall durability of the power field effect transistor.
1 - Having an MSL of 1 indicates that this power field effect transistor is not sensitive to moisture exposure, making it suitable for different operating conditions.
30 - The ability to withstand a maximum time of 30 seconds at peak reflow temperature enhances the stability and reliability of the power field effect transistor during soldering processes.
260 - With a peak reflow temperature of 260°C, this power field effect transistor can endure high-temperature soldering operations effectively.
Power Field Effect Transistors (FET) CPH6355-TL-H attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Configuration:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Field Effect Transistor Technology:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
Maximum Operating Temperature:
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Sub-Category:
Surface Mount:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
CPH6355-TL-H Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Hy Electronic
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDMS86263P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Package Style (Meter): SMALL OUTLINE; Maximum Pulsed Drain Current (IDM): 70 A;
IRLML2502TRPBF
Infineon Technologies
IRLML2502TRPBF by Infineon Technologies is a N-CHANNEL power FET with a min DS breakdown voltage of 20V. It is used for switching applications and has a max drain current of 4.2A.
FDB44N25TM
FDB44N25TM by Onsemi is a N-CHANNEL Power FET with 250V DS Breakdown Voltage and 44A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 176A Pulsed Drain Current, and 307W Power Dissipation in a RECTANGULAR package.
FQD16N25CTM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 160 W; Avalanche Energy Rating (EAS): 432 mJ; Moisture Sensitivity Level (MSL): 1;
BSZ100N06LS3GATMA1
BSZ100N06LS3GATMA1 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, 80A IDM, and 0.0179 ohm RDS. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation. Package: PLASTIC/EPOXY, Surface Mountable, with DUAL terminals and DRAIN case connection.
FDMS86252L
FDMS86252L by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, 30A IDM, and 0.056 ohm RDS(on). Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 50W and can withstand temperatures up to 150°C.
FQT7N10LTF
FQT7N10LTF by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It has a Max IDM of 6.8A and EAS of 50mJ, suitable for SWITCHING applications. This SINGLE transistor in PLASTIC/EPOXY package operates in ENHANCEMENT MODE at up to 150°C, with 0.38 ohm RDS(on) and 2W Pdiss.
STW12N120K5
STW12N120K5 by STMicroelectronics is a N-CHANNEL FET with 1200V DS Breakdown Voltage, 48A IDM, and 0.69 ohm RDS. It's used for SWITCHING applications in ENHANCEMENT MODE, with 250W Pdiss and max temp of 150°C.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
IRFP4468PBF
IRFP4468PBF by Infineon is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It has a max IDM of 1120A and EAS of 740mJ, ideal for SWITCHING applications. With 0.0026 ohm RDS(on) and 520W Pdiss, it operates in ENHANCEMENT MODE at up to 175°C.
AUIRFN8459TR
International Rectifier
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Reference Standard: AEC-Q101; No. of Terminals: 6; Avalanche Energy Rating (EAS): 66 mJ;
IRF7304TRPBF
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Additional Features: LOGIC LEVEL COMPATIBLE; Moisture Sensitivity Level (MSL): 1;
FDMS86101A
FDMS86101A by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 180A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.008 ohm RDS(on), and 104W Pdiss. Suitable for surface mount with 5 terminals in a RECTANGULAR package style.
IRF3710PBF
IRF3710PBF by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage and 180A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 200W and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 175°C.
AUIRF7341QTR
AUIRF7341QTR by Infineon is a N-CHANNEL FET with 55V DS breakdown voltage, ideal for SWITCHING applications. Features include 42A max pulsed drain current, 140mJ avalanche energy rating, and 0.05 ohm max drain-source resistance. Suitable for high-power switching in various electronic devices.
G2R1000MT17D
Genesic Semiconductor
Power Field-Effect Transistors;
FDB2710
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 260 W; JESD-30 Code: R-XSSO-G2; Package Shape: RECTANGULAR;
IRFB4110PBF
IRFB4110PBF by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 670A and EAS of 190mJ, with a Drain Current (ID) of 180A. Operating in ENHANCEMENT MODE, it has a max power dissipation of 370W at 175°C.
FDMC86102LZ
FDMC86102LZ by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.024 ohm RDS(on), and 41W Pdiss. Suitable for surface mount designs in various electronic systems requiring high power efficiency and reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CPH6354-TL-W
Onsemi's CPH6354-TL-W is a P-CHANNEL FET with 60V DS breakdown voltage, 16A IDM, and 0.1 ohm RDS(on). Ideal for SWITCHING applications in ENHANCEMENT MODE, it features GULL WING terminals and operates in SMALL OUTLINE package style.
CPH6350-TL-W
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Tin/Bismuth (Sn/Bi); Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e6;
Sanyo Semiconductor
CPH6445-TL-W
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; No. of Elements: 1; Peak Reflow Temperature (C): 260;
CPH6355-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Drain-Source On Resistance: .169 ohm; Maximum Pulsed Drain Current (IDM): 12 A;
CPH6355-TL-H
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Terminal Finish: TIN BISMUTH; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
CPH6411
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): 6 A;
CPH6350-TL-E
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e6; Terminal Finish: Tin/Bismuth (Sn/Bi);
CPH6413
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Drain Current (Abs) (ID): 5 A; Maximum Drain Current (ID): 5 A;
CPH6337
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; JESD-30 Code: R-PDSO-G6; Terminal Position: DUAL;
CPH6341-TL-E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
CPH6414
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
CPH6347-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (Abs) (ID): 6 A;
CPH6412
CPH6337-TL-W
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6;
CPH6341-TL-W
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
CPH6354-TL-H
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Terminal Finish: TIN BISMUTH; Maximum Drain Current (ID): 4 A;
CPH6315
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Transistor Application: SWITCHING; Minimum DS Breakdown Voltage: 20 V;
CPH6337-TL-E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Moisture Sensitivity Level (MSL): 1;
CPH6352
Sanyo Electric
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Drain Current (Abs) (ID): 3 A; Operating Mode: ENHANCEMENT MODE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved