Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CPH6355-TL-W by Onsemi is a P-CHANNEL FET with 30V DS breakdown voltage, 12A IDM, and 0.169 ohm RDS. Ideal for power applications, it operates in enhancement mode with 150°C max temp. Suitable for surface mount designs, this transistor has a built-in diode and GULL WING terminals.
Median Price
$0.131
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Farnell
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.095
Rochester
$0.136
$0.113
$0.101
DigiKey
$0.170
Verical
$0.126
Digiode
$0.111
Vyrian
Chip Stock
Cyclops Electronics Ltd
Nova Conductors
Semicontronic
$0.081
$0.079
Ampacity Inc.
Corohmni
Corphita
$0.105
Aztec Data Supply Inc.
$1.490
Continental Prestige Electronics
$0.107
Authorized Procurement Solutions
Lixinc
ChipstoGo Electronic ltd
SupplyDigital Components
TANS Electronics
Kepictronics
Futuretech Components
UHIMA Technologies
Problanco Electronics
Bastille Electronics
Kulean Microsystems
Argo Parts USA
This material provides good insulation and protection for the internal components of the FET, ensuring durability and reliability.
P-channel FETs are commonly used for high-side switching applications, making this FET suitable for various power control functions.
The built-in diode allows for efficient commutation of inductive loads, increasing the overall performance of the circuit.
Low on-resistance results in reduced power dissipation and improved efficiency in switching applications.
With a high operating temperature range, this FET can withstand demanding environmental conditions and maintain stable performance.
Power Field Effect Transistors (FET) CPH6355-TL-W attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
CPH6355-TL-W Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - DK OBS NOTICE Mult Dev EOL 7/Apr/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Boca Semiconductor
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Diotec Semiconductor Ag
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDS4559_F085
Fairchild Semiconductor
FDS4559_F085 by Fairchild Semiconductor is a N-CHANNEL Power FET with 60V DS Breakdown Voltage. It features 2 elements with built-in diode, suitable for SWITCHING applications. With 20A IDM and 0.055 ohm RDS(on), it operates in ENHANCEMENT MODE at up to 150°C, making it ideal for high-power electronics.
BSC028N06NSATMA1
Infineon Technologies
Infineon BSC028N06NSATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.0028 ohm RDS(on), and 23A ID. Ideal for SWITCHING applications due to its 400A IDM and 100mJ EAS ratings. Suitable for ENHANCEMENT MODE operation in various electronic devices.
FDD4685-F085P
FDD4685-F085P by Onsemi is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 32A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, operates in ENHANCEMENT MODE, and has an Avalanche Energy Rating of 121mJ.
IRF5210PBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Package Shape: RECTANGULAR; Minimum DS Breakdown Voltage: 100 V;
IRF9310TRPBF
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Qualification: Not Qualified; Maximum Drain Current (Abs) (ID): 20 A;
AUIRF7759L2TR
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Maximum Drain Current (ID): 375 A; No. of Elements: 1;
FDS8949
FDS8949 by Onsemi is a N-CHANNEL Power FET with 40V DS Breakdown Voltage and 20A IDM. It features SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE configuration, suitable for applications requiring high power dissipation in small outline packages. Ideal for enhancing performance in electronic devices operating at temperatures up to 150°C.
FDD6685
FDD6685 by Onsemi is a P-CHANNEL Power FET with 30V DS Breakdown Voltage and 11A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, GULL WING terminals, and operates in ENHANCEMENT MODE. With a max power dissipation of 52W and peak reflow temperature of 260°C, it offers reliable performance in various electronic devices.
NTF3055L108T1G
NTF3055L108T1G by Onsemi is a Power FET with 60V DS Breakdown Voltage, 9A IDM, and 0.12 ohm RDS(on). Ideal for switching applications, it features an N-CHANNEL configuration in a PLASTIC/EPOXY package with GULL WING terminals. Operating in enhancement mode, it has a max power dissipation of 2.1W and can withstand temperatures up to 175°C.
FDD4685_F085
Fairchild Semiconductor's FDD4685_F085 is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 100A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, -55 to 175 °C operating temp range, and 0.027 ohm Drain-Source On Resistance.
SI7116DN-T1-E3
SI7116DN-T1-E3 by Vishay Intertechnology is an N-CHANNEL FET with 40V DS Breakdown Voltage, 60A IDM, and 0.0078 ohm RDS(ON). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 3.8W.
MSC035SMA170B
Microsemi
Power Field-Effect Transistors;
IRF3205ZPBF
IRF3205ZPBF by Infineon is a N-CHANNEL Power FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 440A IDM, 250mJ EAS, and 0.0065 ohm RDS(on). The transistor operates in ENHANCEMENT MODE with a max power dissipation of 170W at 175°C.
IRFB4227PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 330 W; Case Connection: DRAIN; Transistor Element Material: SILICON;
IRF9540PBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Maximum Operating Temperature: 175 Cel; Maximum Drain Current (ID): 19 A;
CSD19534Q5AT
CSD19534Q5AT by Texas Instruments is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It is used for switching applications, has a max IDM of 137A and an EAS rating of 55mJ.
BSZ15DC02KDHXTMA1
Infineon BSZ15DC02KDHXTMA1 is a Power FET with N/P-Channel, 20V DS Breakdown Voltage, and 0.055 ohm RDS(ON). Commonly used in automotive applications due to AEC-Q101 standard compliance.
PMV20ENR
NXP Semiconductors
PMV20ENR by NXP Semiconductors is an N-CHANNEL FET with a max drain current of 7.6A and power dissipation of 6.94W in enhancement mode. Ideal for applications requiring high-power handling, it operates at temperatures up to 150°C and features surface mount configuration for easy installation.
SCT2280KEC
ROHM
ROHM's SCT2280KEC is a N-CHANNEL FET with 1200V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and can handle up to 35A pulsed drain current. With a max power dissipation of 108W and operating temperature of 175°C, it offers reliable performance in various industrial settings.
AUIRFN8459TR
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Reference Standard: AEC-Q101; No. of Terminals: 6; Avalanche Energy Rating (EAS): 66 mJ;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CPH6354-TL-W
Onsemi's CPH6354-TL-W is a P-CHANNEL FET with 60V DS breakdown voltage, 16A IDM, and 0.1 ohm RDS(on). Ideal for SWITCHING applications in ENHANCEMENT MODE, it features GULL WING terminals and operates in SMALL OUTLINE package style.
CPH6350-TL-W
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Tin/Bismuth (Sn/Bi); Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e6;
Sanyo Semiconductor
CPH6445-TL-W
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; No. of Elements: 1; Peak Reflow Temperature (C): 260;
CPH6355-TL-H
CPH6355-TL-H by Onsemi is a P-CHANNEL power FET with a max drain current of 3A and max power dissipation of 1.6W. It is suitable for applications requiring high power and operates at a max temperature of 150°C.
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Terminal Finish: TIN BISMUTH; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
CPH6411
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): 6 A;
CPH6350-TL-E
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e6; Terminal Finish: Tin/Bismuth (Sn/Bi);
CPH6413
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Drain Current (Abs) (ID): 5 A; Maximum Drain Current (ID): 5 A;
CPH6337
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; JESD-30 Code: R-PDSO-G6; Terminal Position: DUAL;
CPH6341-TL-E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
CPH6414
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
CPH6347-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (Abs) (ID): 6 A;
CPH6412
CPH6337-TL-W
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6;
CPH6341-TL-W
Power Field-Effect Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
CPH6354-TL-H
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Terminal Finish: TIN BISMUTH; Maximum Drain Current (ID): 4 A;
CPH6315
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Transistor Application: SWITCHING; Minimum DS Breakdown Voltage: 20 V;
CPH6337-TL-E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Moisture Sensitivity Level (MSL): 1;
CPH6355-TL
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Shape: RECTANGULAR; Transistor Application: SWITCHING; JESD-30 Code: R-PDSO-G6;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved