Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1600 W; Maximum Collector Current (IC): 460 A; Minimum Operating Temperature: -40 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Modulus Dynamics
$1.873
$1.798
$1.723
AZTECH Wire
$21.650
Native Components
$27.800
Northwest PG Solutions
$30.580
$27.522
Ampacity Inc.
$48.050
Microchip USA
$289.932
Authorized Procurement Solutions
Corphita
Insulated Gate Bipolar Transistors (IGBT) FF300R12KE4EHOSA1 attributes and parameters. Explore more Insulated Gate Bipolar Transistors (IGBT) devices from Infineon Technologies
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Maximum Gate-Emitter Threshold Voltage:
Maximum Gate-Emitter Voltage:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Reference Standard:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Turn Off Time (toff):
Nominal Turn On Time (ton):
Maximum VCEsat:
FF300R12KE4EHOSA1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Mde Semiconductor
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR0520LT1
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Diodes Incorporated
STGD6NC60HDT4
STGD6NC60HDT4 by STMicroelectronics is an N-CHANNEL IGBT with 600V max collector-emitter voltage, 15A max collector current, and 56W max power dissipation. Ideal for power control applications due to its fast turn-off time of 222ns and built-in diode configuration.
HGTG11N120CND
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Maximum Collector Current (IC): 43 A; Maximum Rise Time (tr): 16 ns;
FGA30T65SHD
Onsemi
FGA30T65SHD by Onsemi is an N-CHANNEL IGBT transistor with a max VCEsat of 2.1V and IC of 60A, ideal for power control applications. It has a turn-off time of 67.2ns, operating temperature range from -55 to 175 °C, and a collector-emitter voltage of 650V. The package style is flange mount with matte tin terminal finish in a rectangular shape.
FF300R12KS4HOSA1
Infineon Technologies
FF300R12KS4HOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 2 SERIES CONNECTED elements. It has a max voltage of 1200V, max current of 370A, and turn off time of 590ns. Ideal for applications requiring high power switching like industrial motor drives and renewable energy systems.
FZ600R12KS4HOSA1
FZ600R12KS4HOSA1 by Infineon Technologies is an N-CHANNEL IGBT with a max Collector-Emitter Voltage of 1200V and a Nominal Turn Off Time of 590ns. It features a SINGLE configuration with BUILT-IN DIODE, suitable for high-power applications like industrial motor drives and renewable energy systems.
IXYP20N65C3D1
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Maximum Collector Current (IC): 50 A; No. of Terminals: 3;
FPF2G120BF07ASP
N-CHANNEL; Configuration: SEPARATE, 3 ELEMENTS WITH BUILT-IN DIODE AND THERMISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 156 W; Maximum Collector Current (IC): 40 A; Transistor Element Material: SILICON;
FF200R12KS4HOSA1
FF200R12KS4HOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 2 SERIES CONNECTED elements. It has a max voltage of 1200V, max current of 275A, and turn off time of 590ns. Ideal for applications requiring high power switching such as industrial motor drives and renewable energy systems.
SGP10N60RUFDTU
SGP10N60RUFDTU by Onsemi is an N-CHANNEL IGBT with 600V VCE, 16A IC, and 75W Pd. Ideal for MOTOR CONTROL applications due to its single configuration with built-in diode. Features fast switching times: ton of 49ns and tf of 220ns.
FP100R06KE3
Eupec & Kg
N-CHANNEL; Configuration: COMPLEX; Surface Mount: NO; Nominal Turn Off Time (toff): 820 ns; Nominal Turn On Time (ton): 170 ns; Package Shape: RECTANGULAR;
Onsemi's FPF2G120BF07ASP is an N-CHANNEL IGBT with 3 elements, diode, and thermistor. Ideal for power control applications with VCEsat of 2.2V, IC of 40A, and toff of 165ns. Operates at -40 to 150°C temperature range in a flange mount package style.
IXBX75N170
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1040 W; Maximum Collector Current (IC): 200 A; JESD-30 Code: R-PSIP-T3;
IRG4BC40KPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 160 W; Maximum Collector Current (IC): 42 A; Package Shape: RECTANGULAR;
IRG4IBC20KDPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 34 W; Maximum Collector Current (IC): 11.5 A; Maximum Operating Temperature: 150 Cel;
STGP20V60DF
N-CHANNEL; Surface Mount: NO; Maximum Collector Current (IC): 40 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Maximum Gate-Emitter Voltage: 20 V; Peak Reflow Temperature (C): NOT SPECIFIED;
Intersil
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 298 W; Maximum Collector Current (IC): 43 A; Maximum Fall Time (tf): 400 ns;
FS75R12KE3B9BOSA1
FS75R12KE3B9BOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 6 elements in a BRIDGE configuration. It has a max voltage of 1200V, max current of 105A, and turn-off time of 610ns. Ideal for high-power applications requiring fast switching such as motor drives and power supplies.
IFF600B12ME4PB11BPSA1
Infineon Technologies IFF600B12ME4PB11BPSA1 is a N-CHANNEL IGBT with 2 elements, built-in diode, and thermistor. It has a max Vce of 1200V, toff of 750ns, and ton of 250ns. Ideal for power control applications due to UL recognition and isolated case connection.
IRG4PC50KDPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 104 W; Maximum Collector Current (IC): 52 A; Terminal Form: THROUGH-HOLE;
IXYN82N120C3H1
Littelfuse
The Littelfuse IXYN82N120C3H1 is an N-CHANNEL IGBT with a max VCEsat of 3.2V and IC of 105A, ideal for POWER CONTROL applications. Featuring a package style of FLANGE MOUNT, it has a max VCE of 1200V and can operate in temperatures ranging from -55 to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FF300R12ME4BOSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE AND THERMISTOR; Surface Mount: NO; Maximum Collector Current (IC): 450 A; No. of Terminals: 11; Qualification: Not Qualified;
FF300R12KT4HOSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 450 A; Terminal Position: UPPER; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 370 A; Package Shape: RECTANGULAR; Nominal Turn On Time (ton): 180 ns;
FF300R12MS4BOSA1
FF300R12MS4BOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 2 SERIES CONNECTED elements, a max voltage of 1200V, and a current rating of 370A. It has a turn-off time of 590ns and a turn-on time of 180ns, making it suitable for high-power applications like industrial motor drives and renewable energy systems.
FF300R12ME4B11BPSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE AND THERMISTOR; Surface Mount: NO; Maximum Collector Current (IC): 450 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
FF300R12KE3HOSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 440 A; Nominal Turn On Time (ton): 400 ns; No. of Terminals: 7;
FF300R17ME4BOSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE AND THERMISTOR; Surface Mount: NO; Maximum Collector Current (IC): 375 A; Peak Reflow Temperature (C): NOT SPECIFIED; No. of Terminals: 11;
FF300R12ME4PB11BPSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE AND THERMISTOR; Surface Mount: NO; JESD-30 Code: R-XUFM-X11; Maximum Collector-Emitter Voltage: 1200 V; Maximum Gate-Emitter Threshold Voltage: 6.4 V;
FF300R12KE4HOSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 460 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Case Connection: ISOLATED;
FF300R12KT3HOSA1
FF300R12KT3HOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 2 SERIES CONNECTED elements. It has a max voltage of 1200V and current of 480A, making it ideal for POWER CONTROL applications. With a turn-off time of 680ns and turn-on time of 215ns, this RECTANGULAR package transistor operates at temperatures up to 150°C.
FF300R12KE4B2HOSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 460 A; Case Connection: ISOLATED; Maximum Collector-Emitter Voltage: 1200 V;
FF300R17KE3HOSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 404 A; No. of Elements: 2; Nominal Turn On Time (ton): 400 ns;
FF300R12KS4PHOSA1
FF300R12KS4PHOSA1 by Infineon Technologies is an N-CHANNEL IGBT with 2 SERIES CONNECTED elements. It has a Max Collector-Emitter Voltage of 1200V and Nominal Turn Off Time of 590ns, making it ideal for POWER CONTROL applications. This UL APPROVED transistor operates from -40°C with a fast Nominal Turn On Time of 180ns.
FF300R12ME3BOSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE AND THERMISTOR; Surface Mount: NO; Maximum Collector Current (IC): 500 A; No. of Terminals: 11; Terminal Form: UNSPECIFIED;
FF300R12KT3EHOSA1
N-CHANNEL; Configuration: COMMON EMITTER, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 480 A; Reference Standard: UL RECOGNIZED; Package Body Material: UNSPECIFIED;
FF300R06KE3HOSA1
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 400 A; No. of Terminals: 7; Package Style (Meter): FLANGE MOUNT;
FF300R07KE4HOSA1
N-CHANNEL; Configuration: SERIES, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 365 A; JESD-30 Code: R-XUFM-X7; Peak Reflow Temperature (C): NOT SPECIFIED;
FF300R12KE4
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1600 W; Maximum Collector Current (IC): 460 A; Package Shape: RECTANGULAR;
FF300R07ME4
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE AND THERMISTOR; Surface Mount: NO; Maximum Collector Current (IC): 300 A; Transistor Application: POWER CONTROL; Nominal Turn On Time (ton): 138 ns;
FF300R12KE4_B2
N-CHANNEL; Configuration: SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1600 W; Maximum Collector Current (IC): 460 A; No. of Terminals: 7;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved