Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-2.40V; Maximum Supply Voltage: 1.95 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
TANS Electronics
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
Corphita
UHIMA Technologies
Corohmni
Image Sensors MT9D131C12STCES attributes and parameters. Explore more Image Sensors devices from Aptina
Additional Features:
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Dynamic Range:
Frame Rate:
Horizontal Pixel:
Housing:
Master Clock:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Output Interface Type:
Output Range:
Output Type:
Package Shape or Style:
Pixel Size (um):
Sensitivity (V/lx.s):
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Vertical Pixel:
Aptina Imaging Corporation was a company that sold CMOS imaging products. Their CMOS sensors were used in the Nikon V1, Nikon J1, and Nikon V2. By 2009 year Aptina had a 16% share of the CMOS image sensors market, with revenue estimated at $671 million. The company was acquired in 2014 by Onsemi.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
MBR0520LT1
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
World Products
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
BSS123-7-F
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
KAE-08151-FBA-SD-EE
Onsemi
KAE-08151-FBA-SD-EE by Onsemi is an image sensor with 5.5x5.5 um pixel size, 66 dB dynamic range, and 2856 horizontal and vertical pixels. It operates b/w -40 to 40 °C with a supply voltage range of 14.7V to 15.3V. Ideal for applications requiring high-resolution imaging in industrial or scientific settings due to its superior technical specifications.
TC217-30
Texas Instruments
TC217-30 by Texas Instruments is an image sensor with 11.7X9 um pixel size, 1134 horizontal pixels, and 486 vertical pixels. It operates b/w -30 to 85 °C with a dynamic range of 73 dB. Ideal for applications requiring high sensitivity and precise imaging in various environments.
KLI-2104-DAA-EB-AE
The Onsemi KLI-2104-DAA-EB-AE is a CCD image sensor with 14X7 um pixel size. It offers a dynamic range of 80 dB and operates b/w -25 to 80 °C. Ideal for applications requiring high-quality imaging in environments with varying temperatures, housed in ceramic package with through hole mounting.
AR0220AT4B00XUEA2-VL-TPBR
The Onsemi AR0220AT4B00XUEA2-VL-TPBR is a CMOS image sensor with 1828x948 pixels, 1/1.8" optical format, and 60 fps frame rate. It features digital output via a 2-wire interface and is ideal for applications requiring high-resolution imaging in a compact form factor.
AR0521SR2M09SURA0-DP
Onsemi's AR0521SR2M09SURA0-DP is a 12x1.62mm CMOS image sensor with 2592x1944 resolution, 1/2.5" optical format, and 60fps frame rate. Ideal for surface mount applications requiring high-quality image capture in devices like cameras and security systems.
AR0141IRSH00SUEA0-DR
The Onsemi AR0141IRSH00SUEA0-DR is a CMOS image sensor with 1280x800 resolution and 3x3 um pixel size. Operating at -30 to 70 °C, it offers a dynamic range of 79 dB and outputs digital voltage from 0.40-2.50V. Ideal for applications requiring high-quality imaging in a compact form factor like surveillance cameras or industrial machine vision systems.
KAI-29050-QXA-JD-B1
KAI-29050-QXA-JD-B1 by Onsemi is an image sensor with 5.5x5.5 um pixel size, 15.5 V max supply voltage, and 6644 horizontal pixels. Ideal for applications requiring high-resolution imaging in a compact form factor, such as industrial machine vision systems or medical imaging devices.
KAI-02150-ABA-JD-BA
Truesense Imaging
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Vertical Pixel: 1080; Additional Features: IT HAS OUTPUT SENSITIVITY OF 34 MICRO VOLT PER ELECTRON; Optical Format (inch): 2/3;
KAI-16070-FXA-JD-B1
KAI-16070-FXA-JD-B1 by Onsemi is an image sensor with 7.4X7.4 um pixel size, 40 MHz master clock, and 70.5 dB dynamic range. Ideal for applications requiring high-resolution imaging in industrial cameras or scientific instruments due to its 4864x3232 pixel resolution and INTERLINE array type.
VSP2590ZWV
VSP2590ZWV by Texas Instruments is an 8mm square CCD image sensor with a supply voltage range of 2.7-3.3 V, operating temperature from -25 to 85°C, and data rate of 42 Mbps. It is ideal for applications requiring analog voltage output, such as in digital cameras or industrial imaging systems.
AR0431CSSC14SMRA0-DP
Onsemi's AR0431CSSC14SMRA0-DP is a 10.16mm x 10.16mm CMOS image sensor with 2312x1746 resolution, offering high-quality imaging for applications like surveillance cameras and automotive vision systems at a frame rate of 120 fps.
MT9T031C12STC-DP
Onsemi's MT9T031C12STC-DP is a 3.20x3.20 um CMOS image sensor with 2048H x 1536V pixels, offering a dynamic range of 61 dB and operating at a max clock speed of 48 MHz. This sensor, housed in ceramic, features a digital voltage output interface and is ideal for applications requiring high-resolution imaging at up to 12 fps.
KAI-29050-PXA-JD-B1
Onsemi's KAI-29050-PXA-JD-B1 is a 5.5X5.5 um CCD image sensor with 6576Hx4384V pixels, offering a dynamic range of 64 dB. Operating b/w -50 to 70 °C, it requires a 15V power supply and has an optical format of 4/2.99 inch. Ideal for applications requiring high-resolution imaging in varying temperatures.
NOM02A4-AR03G
NOM02A4-AR03G by Onsemi is a CMOS image sensor with 4.5-5.5V supply voltage range, 0.90-1.1V analog output, and 67mA max current draw. It is ideal for applications requiring high-resolution imaging in a compact form factor, such as security cameras or industrial machine vision systems.
KAE-08151-ABA-JP-FA
The Onsemi KAE-08151-ABA-JP-FA is an image sensor with 5.5x5.5 um pixel size, 2856 horizontal and vertical pixels, and 86 dB dynamic range. It operates b/w -70 to 40 °C with a supply voltage range of 14.7V to 15V. Ideal for applications requiring high-resolution imaging in industrial cameras or surveillance systems due to its CCD sensor technology and rectangular package style.
AR0331SRSC00SUCA0-DPBR
Onsemi's AR0331SRSC00SUCA0-DPBR is a 2.2x2.2 um CMOS image sensor with 2048 (H) x 1536 (V) pixels and a 1/3 inch optical format. It operates at a max supply voltage of 1.95V, has a master clock of 48 MHz, and offers a dynamic range of 100 dB. Ideal for applications requiring high-resolution imaging at up to 60 fps in automotive cameras and surveillance systems.
NOIL2SM1300A-GDC
NOIL2SM1300A-GDC by Onsemi is an image sensor with 14x14 um pixel size, 315 MHz master clock, and 1280 horizontal pixels. Ideal for digital output applications in cameras, offering a max supply voltage of 2.625 V and operating temperature range of 0-70 °C.
AR0239ATSH00XUEA0-DRBR-E
Onsemi's AR0239ATSH00XUEA0-DRBR-E is a 3x3 um CMOS image sensor with 1936H x 1188V pixels, offering a dynamic range of 128 dB. Operating at -40 to 105 °C, it has a digital voltage output interface and supports frame rates up to 90 fps. Ideal for applications requiring high-resolution imaging in automotive and surveillance systems.
AR0130CSSM00SPCA0-DPBR
The Onsemi AR0130CSSM00SPCA0-DPBR image sensor features 3.75um pixel size, 50MHz master clock, and 1280x960 resolution. Ideal for digital cameras, surveillance systems, and automotive applications due to its high dynamic range of 82dB and frame rate of 60fps.
MT9V131C12STC-TR
MT9V131C12STC-TR by Onsemi is a 640x480 CMOS image sensor with 5.60um pixel size and 27 MHz master clock. Ideal for digital cameras, it offers a dynamic range of 60 dB and operates at temperatures ranging from -20 to 70 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Aptina
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved