Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2400 MHz; Maximum Collector Current (IC): .025 A; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
Median Price
$0.407
Lifecycle Status
Suppliers In-Stock
45
In-Stock Inventory
1k+
NAC Semi
1+ parts
100+ parts
-
1k+ parts
10k+ parts
$0.130
MISTER SPROCKETS
LIBRA Elektronik GmbH
Chip Stock
ComSIT Distribution GmbH
Semtec, LLC
J2 Sourcing AB
Freddi Giovanni
Odi Ramu Company
PC Components Company LLC
Bristol Electronics
Dan-Mar Components
Tectiva GmbH
Prism Electronics
Corel Iberica Componentes, S.L.
VNN
Component Sense
Q Components
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Holdelec - ElecDif-Pro
A&K Electronics
Rotakorn
R&J Components
Digital Electronic Gebert Verwaltungs UG
Pegasus Components GmbH
Digiode
Whistler Technology
ECAB
Anansix
Semi Source
Vyrian
Connector Distribution Corp
Right Parts Inc.
Lantek
First Choice Components Inc.
Ack Elektronik San.Tic.Ltd.Sti
Mil-Aero Solutions, Inc.
GES GmbH
LWI Electronics Inc
Ashlea Components Ltd
Lighthouse Electronics, Inc.
Resion
Huijzer Components
Nova Conductors
Legend Electronics Inc.
Modulus Dynamics
$0.425
IDEA Electronic Components Group
$1.222
$1.100
Corohmni
$1.967
MKK Technologies
$2.297
DigiPath Technology Company
AZTECH Wire
$9.780
One Stop Electronics
$47.050
Perfect Parts
Assy Fe
Kepictronics
Cyclops Electronics Ltd (Excess)
UNI Independent Distributors
Continental Prestige Electronics
Corphita
Alle Elektronik GmbH
Argo Parts USA
Parana Technologies
$1.461
Bastille Electronics
RF Small Signal Bipolar Junction Transistors (BJT) BFS17 attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Vishay Semiconductors
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Highest Frequency Band:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
BFS17 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
5961-01-250-8512, 5961012508512, 5961-15-007-1672, 5961150071672
NIIN
012508512, 150071672
The Vishay Semiconductors product portfolio includes rectifiers, fast-recovery diodes, high-power diodes and thyristors, small-signal diodes, Zener and suppressor diodes, RF transistors, optoelectronics, power modules (a combination of power diodes, thyristors, MOSFETs, and IGBTs), and automotive modules and assemblies. Vishay is the world's number one manufacturer of rectifiers, glass diodes, and infrared components.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
Changzhou Starsea Electronics
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BFR96
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 4500 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A;
2SC4915-O,LF(B
Toshiba
2SC4915-O,LF(B by Toshiba is an NPN RF BJT with a single configuration for amplifier applications. It offers a min power gain of 17 dB and operates in the very high frequency band up to 550 MHz. With a max collector-emitter voltage of 30V and dual terminal position, it is suitable for small outline surface mount designs.
BFU790F,115
NXP Semiconductors' BFU790F,115 is an NPN RF BJT with a max power dissipation of 0.234W and min hFE of 235. Ideal for surface mount applications, it has a max IC of 0.1A making it suitable for high-frequency signal amplification in various electronic devices.
MPSH10
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 650 MHz; Maximum Collector Current (IC): .1 A; Terminal Form: THROUGH-HOLE;
MPS5179RL
MPS5179RL by Onsemi is a NPN BJT transistor with 900 MHz fT, suitable for amplifier applications. It has a max collector-emitter voltage of 12V and can handle a collector current of 0.05A. The package style is cylindrical with through-hole terminals, ideal for very high frequency band circuits.
CA3146E
Harris Semiconductor
NPN; Configuration: COMPLEX; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Collector Current (IC): .05 A; Terminal Form: THROUGH-HOLE;
BF959RLRE
BF959RLRE by Onsemi is a NPN RF BJT with max. 20V VCE, 0.1A IC, and 700MHz fT. Ideal for very high frequency band applications due to its silicon element material and cylindrical package style. Operating temp up to 150 °C makes it suitable for various through-hole configurations.
MPSH10RLRM
MPSH10RLRM by Onsemi is an NPN RF BJT with a max collector-emitter voltage of 25V and fT of 650MHz. Its package is cylindrical, suitable for ultra-high frequency applications at up to 150 °C operating temperature. Ideal for RF amplification in communication systems.
MMBTH10
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 650 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .05 A;
HFA3096BZ
Integrated Device Technology
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Package Style (Meter): SMALL OUTLINE;
MSC82040
STMicroelectronics
STMicroelectronics' MSC82040 is an NPN BJT transistor with 4 terminals, ideal for L Band applications. Featuring a max operating temp of 200 °C, it has a fT of 1600 MHz and hFE of 15, making it suitable for amplifier circuits in high-frequency environments. The package style is post/stud mount with a ceramic-metal-sealed co-fired body material.
KSC1393
KSC1393 by Onsemi is an NPN RF BJT with a single configuration for amplifier applications. It offers a min power gain of 20 dB, nominal transition frequency of 700 MHz, and max collector-emitter voltage of 30 V. This transistor operates in the very high-frequency band and has a max power dissipation of 0.25 W at an ambient temperature of 150 °C.
SS9018H
SS9018H by Onsemi is an NPN BJT transistor for RF applications. It has a max VCEsat of 0.5V, hFE of 97, and fT of 1100MHz. Ideal for amplifier circuits in L Band frequencies with a max operating temp of 150 °C.
15GN03CA-TB-E
RF Small Signal Bipolar Transistors; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30;
JANTX2N2907A
Vpt Components
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .6 A; Transistor Element Material: SILICON; Maximum Operating Temperature: 200 Cel;
934055891115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 9000 MHz; Maximum Collector Current (IC): .018 A; Transistor Element Material: SILICON;
934067703215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 11000 MHz; Maximum Power Dissipation (Abs): .45 W; Maximum Collector Current (IC): .065 A;
2N918
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 900 MHz; Maximum Collector Current (IC): .05 A; Package Body Material: METAL;
MMBT5179
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 900 MHz; Maximum Collector Current (IC): .05 A; Terminal Form: GULL WING;
NESG260234-T1-AZ
Nec Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .6 A; Package Style (Meter): SMALL OUTLINE; JESD-609 Code: e6;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BFS17WH6327XTSA1
Infineon Technologies
BFS17WH6327XTSA1 by Infineon Technologies is an NPN RF small signal bipolar junction transistor (BJT) with a max collector-emitter voltage of 15V and a nominal transition frequency of 2500MHz. It is commonly used as an amplifier in applications requiring ultra high frequency band performance.
BFS17PE6327HTSA1
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2500 MHz; Maximum Power Dissipation (Abs): .28 W; Maximum Collector Current (IC): .025 A;
BFS17SH6327XTSA1
NPN; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 2500 MHz; Maximum Collector Current (IC): .025 A; No. of Terminals: 6;
BFS17PE6433
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2500 MHz; Maximum Collector Current (IC): .025 A; Maximum Collector-Base Capacitance: .8 pF;
BFS17
Diodes Incorporated
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1300 MHz; Maximum Collector Current (IC): .025 A; Terminal Form: GULL WING;
Philips Components
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1300 MHz; Maximum Collector Current (IC): .025 A; Qualification: Not Qualified;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .025 A;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1600 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .025 A;
Temic Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2100 MHz; Maximum Collector Current (IC): .025 A; Package Body Material: PLASTIC/EPOXY;
Micro Commercial Components
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1000 MHz; Maximum Collector Current (IC): .025 A; JESD-609 Code: e0;
Vishay Telefunken
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2400 MHz; Maximum Collector Current (IC): .025 A; Package Body Material: PLASTIC/EPOXY;
ROHM
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1000 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .05 A;
BFS17,215
BFS17,235
BFS17A,215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2800 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .025 A;
BFS17NQTA
RF Small Signal Bipolar Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
BFS17NTA
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3200 MHz; Maximum Power Dissipation (Abs): .33 W; Maximum Collector Current (IC): .05 A;
BFS17W
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2500 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .025 A;
BFS17A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2800 MHz; Maximum Collector Current (IC): .035 A; No. of Terminals: 3;
Vishay Semiconductors
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved