Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MMBTH10-4LT1 by Onsemi is an NPN RF BJT with a max fT of 800 MHz. It has a max IC of 0.025 A and hFE of 120, suitable for UHF applications. This small outline transistor operates up to 150 °C, making it ideal for high-frequency circuits in compact designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
AZTECH Wire
$15.830
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Corphita
Corohmni
UHIMA Technologies
The plastic/epoxy material provides good insulation and protection for the transistor, ensuring better performance and durability.
NPN transistors are commonly used in amplifier circuits, making this product suitable for high-frequency applications.
Being surface mountable makes the installation process easier and more efficient, especially for compact electronic designs.
The high maximum operating temperature allows for reliable performance even in challenging environmental conditions.
A high transition frequency indicates good speed and efficiency in signal amplification, making this transistor suitable for high-frequency applications.
RF Small Signal Bipolar Junction Transistors (BJT) MMBTH10-4LT1 attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
Highest Frequency Band:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
Nominal Transition Frequency (fT):
MMBTH10-4LT1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Multiple Devices 30/Jun/2006
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Nexperia
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SPC TECHNOLOGY/ MULTICOMP
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
934067703235
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 11000 MHz; Maximum Power Dissipation (Abs): .45 W; Maximum Collector Current (IC): .065 A;
BFP405FH6327XTSA1
Infineon Technologies
BFP405FH6327XTSA1 by Infineon Technologies is a NPN RF BJT with built-in diode, ideal for amplifier applications in L Band. Featuring 4 terminals, it has a max fT of 25 GHz and VCE of 4.5V. This small outline transistor has a collector current of 0.012A and low capacitance at 0.1pF, meeting AEC-Q101 standards.
934067693115
RF Small Signal Bipolar Transistors; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN;
BSX28
STMicroelectronics
BSX28 by STMicroelectronics is an NPN RF BJT designed for switching applications. It features a max power dissipation of 0.36 W, operates up to 175 °C, and supports a collector current of 0.5 A. Its compact cylindrical package ensures efficient performance in various electronic circuits.
2N3570
Texas Instruments
2N3570 by Texas Instruments is a NPN BJT transistor with 4 terminals, 0.05A IC, and 1500MHz fT. Ideal for amplifier applications in the ultra high frequency band, it has a max operating temperature of 175°C and 0.2W power dissipation.
BFP420H6327XTSA1
Infineon's BFP420H6327XTSA1 is an NPN RF BJT transistor with a max fT of 25 GHz. It is ideal for X Band applications, featuring a max VCE of 4.5V and IC of 0.035A. The transistor operates in temperatures as low as -65°C and complies with AEC-Q101 standards.
934063131115
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 4000 MHz; Maximum Collector Current (IC): .025 A; Additional Features: HIGH RELIABILITY;
SMMBT918LT1
SMMBT918LT1 by Onsemi is a NPN RF BJT transistor with 3 terminals, suitable for amplifier applications in the ultra-high frequency band. It has a max collector-emitter voltage of 15V, collector current of 0.05A, and transition frequency of 600MHz. The package is surface mountable with Gull Wing terminals in a small outline style.
CA3083M96
Rochester Electronics
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 450 MHz; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified;
NSVF6001SB6T1G
NSVF6001SB6T1G by Onsemi is an NPN BJT transistor with 6 terminals, operating at -55 to 150 °C. It has a max collector-emitter voltage of 12V and fT of 6700 MHz, suitable for ultra-high frequency amplifier applications in AEC-Q101 standard environments.
MMBT5179
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 900 MHz; Maximum Collector Current (IC): .05 A; Terminal Form: GULL WING;
SS9018I
SS9018I by Onsemi is an NPN BJT transistor for RF applications. With a max VCEsat of 0.5V, it operates in L Band with fT at 1100MHz. Ideal for amplifiers, it has hFE of 132 and can handle IC up to 0.05A at 150 °C max temp.
BFR92AW,115
NXP Semiconductors' BFR92AW,115 is an NPN RF BJT with a max fT of 5000 MHz. It has a max power dissipation of 0.3 W and operates in the ultra-high frequency band. Ideal for amplifier applications, this transistor comes in a small outline package with gull wing terminals for surface mount assembly.
BLF871,112
Ampleon Netherlands B V
RF Small Signal Bipolar Transistors; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
BFS17W
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 2500 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .025 A;
CA3146E
Harris Semiconductor
NPN; Configuration: COMPLEX; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Collector Current (IC): .05 A; Terminal Form: THROUGH-HOLE;
BFP840ESDH6327XTSA1
BFP840ESDH6327XTSA1 by Infineon Technologies is a RF Small Signal Bipolar Junction Transistor (BJT) with NPN polarity. It is a single configuration amplifier, suitable for C Band applications. With a max operating temperature of 150°C and a nominal transition frequency of 80 MHz, it offers high performance in a small outline package.
BFU730F,115
NXP Semiconductors' BFU730F,115 is an NPN RF BJT with max. power dissipation of 0.197W and min. DC current gain of 205. Ideal for surface mount applications, it has a max. collector current of 0.03A and uses silicon germanium material.
50A02SP
The Onsemi 50A02SP is a PNP RF BJT transistor with max. Vce of 50V and Ic of 0.5A. Ideal for switching applications, it has fT of 690MHz and comes in a plastic/epoxy package with through-hole terminals.
MPS6507RLRM
MPS6507RLRM by Onsemi is an NPN RF BJT transistor with a max collector-emitter voltage of 20V and a nominal transition frequency of 800MHz. It is commonly used as an amplifier in applications requiring high-frequency signal amplification. The transistor has a max operating temperature of 150 °C, making it suitable for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMBTH81
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 600 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .05 A;
The Onsemi MMBTH81 is a PNP RF BJT with 3 terminals, operating in the VHF band. It has a max power dissipation of 0.35W and transition frequency of 600MHz. Ideal for amplifier applications due to its high collector-emitter voltage and small outline package style.
MMBTH10LT1G
MMBTH10LT1G by Onsemi is an NPN RF transistor with a max operating temperature of 150°C. It has a small outline package style and can handle a max collector-emitter voltage of 25V. This transistor is commonly used in ultra high frequency band applications.
MMBTH81_NL
MMBTH81_NL by Fairchild Semiconductor is a PNP RF BJT transistor with 3 terminals, suitable for amplifier applications in the VHF band. It has a max power dissipation of 0.35W, DC current gain of 60 (hFE), and operates at temperatures up to 150°C. This surface-mount transistor features a small outline package with gull wing terminals.
MMBTH81D87Z
MMBTH81D87Z by National Semiconductor is a PNP BJT transistor with a max collector-emitter voltage of 20V and a nominal transition frequency of 600MHz. It is designed for amplifier applications in the very high-frequency band, featuring a small outline package with gull wing terminals for surface mount assembly.
MMBTH81LT1
MMBTH81LT1 by Onsemi is a PNP RF small signal BJT with a max collector-emitter voltage of 20V and a nominal transition frequency of 600MHz. It is commonly used in applications requiring ultra high frequency band performance, such as wireless communication systems.
Motorola
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 600 MHz; JESD-30 Code: R-PDSO-G3; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
MMBT918LT1G
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 600 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .05 A;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 900 MHz; Maximum Collector Current (IC): .05 A; No. of Terminals: 3;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 900 MHz; Maximum Collector Current (IC): .05 A; Qualification: Not Qualified;
MMBTH11
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 650 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .05 A;
MMBTH11 by Onsemi is a NPN BJT transistor for RF applications. It operates in the very high frequency band with a max fT of 650 MHz. With a collector-emitter voltage of 25V and max power dissipation of 0.35W, it is ideal for amplifier circuits in small outline packages.
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 660 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .05 A;
MMBTH10
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 650 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .05 A;
Panjit International
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 650 MHz; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; JESD-30 Code: R-PDSO-G3;
Jiangsu Changjiang Electronics Technology
Secos
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved