Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MMBTH10LT1G by Onsemi is an NPN RF transistor with a max operating temperature of 150°C. It has a small outline package style and can handle a max collector-emitter voltage of 25V. This transistor is commonly used in ultra high frequency band applications.
Median Price
$0.055
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
1k+ parts
10k+ parts
-
Arrow
$0.098
$0.043
$0.029
Newark
$0.110
Mouser Electronics
$0.120
Farnell
DigiKey
$0.040
Rochester
$0.035
$0.025
Verical
Future Electronics
$0.036
Avnet
Element14
$0.131
Chip1Stop
$0.032
Flip Electronics
$0.017
Digiode
$0.027
Nova Conductors
$0.056
TME
$0.090
$0.034
Bristol Electronics
$0.139
$0.069
$0.028
Component Electronics Inc.
$0.380
$0.290
$0.250
Maritex
$0.476
$0.107
$0.075
$0.062
DigiKey Marketplace
IBS Electronics
NAC Semi
$0.080
Vyrian
Chip Stock
South Electronics
Cyclops Electronics Ltd
Dan-Mar Components
ACDS - Activité Composants Distribution Service
Semi Source
LWI Electronics Inc
Elcom Components
Inventory MP
Sogenti Electronics
LIBRA Elektronik GmbH
R&J Components
DF Sales Co.
Schukat
$0.039
$0.031
$0.026
Lantek
Sensible Micro Corp
ComSIT Distribution GmbH
Prism Electronics
Semicontronic
$0.020
$0.019
Ampacity Inc.
$0.021
Corphita
Corohmni
Argo Parts USA
$0.052
$0.051
Advanced Electronics
Bastille Electronics
$0.053
$0.050
Aztec Data Supply Inc.
$1.837
Continental Prestige Electronics
Infinite Electronics LLP (Excess)
Perfect Parts
Authorized Procurement Solutions
GreenTree Electronics
CPlus Electronics
RC Electronics
$0.060
Metaverse IC Inc.
Kepictronics
Glotronic Ltd.
Robosynatics
$0.054
Lucentia Tech
Eastek
QUARKTWIN TECHNOLOGY LTD
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
Futuretech Components
UHIMA Technologies
TANS Electronics
This material provides durability and protection for the transistor, ensuring it can withstand various environmental conditions.
NPN transistors are commonly used in amplification and switching applications, making this product versatile for different circuit designs.
Surface mount capability allows for easy integration onto PCBs, saving space and simplifying assembly processes.
The single configuration simplifies circuit design and reduces complexity, making it easier to implement in various applications.
With a high maximum operating temperature, this transistor can withstand elevated temperatures without performance degradation.
The high maximum collector-emitter voltage ensures the transistor can handle higher voltage applications, increasing its versatility.
The high transition frequency allows for high-speed switching and amplification, making this transistor suitable for high-frequency applications.
RF Small Signal Bipolar Junction Transistors (BJT) MMBTH10LT1G attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
Highest Frequency Band:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
Nominal Transition Frequency (fT):
MMBTH10LT1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.21.00.95
SB
8541.21.00.80
NSN
5961-01-383-5579, 5961013835579
NIIN
013835579
PCN Design/Specification - Glue Mount Process 11/July/2008 SOT23 16/Sep/2016
PCN Assembly/Origin - Mold Compound 02/Apr/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Rectron
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
NC7WZ07P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
2N4429
STMicroelectronics
2N4429 by STMicroelectronics is an NPN RF BJT designed for amplifier applications, featuring a max power dissipation of 5W and a nominal transition frequency of 700 MHz. It operates in the ultra-high frequency band with a max temp of 200 °C. Its flat, round package ensures efficient mounting.
934047460135
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 22000 MHz; Maximum Collector Current (IC): .012 A; Terminal Position: DUAL;
2SC5226A-5-TL-E
Onsemi
Onsemi's 2SC5226A-5-TL-E is an NPN RF BJT with a max fT of 7000 MHz. It has a max VCE of 10V and IC of 0.07A, suitable for ultra-high frequency applications. This transistor comes in a small outline package with Gull Wing terminals, ideal for surface mount designs.
934056631215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 9000 MHz; Maximum Collector Current (IC): .05 A; Terminal Form: GULL WING;
BFR96
NXP Semiconductors' BFR96 is an NPN RF BJT transistor with a max fT of 5000 MHz. It has a max VCE of 15V and IC of 0.075A, ideal for ultra-high frequency amplifier applications. The package is round, surface mountable, with 3 terminals in a disk button style.
KSP10TA
The Onsemi KSP10TA is an NPN BJT transistor with a max power dissipation of 0.35W and a transition frequency of 650MHz. It is ideal for applications requiring ultra high frequency band operation, such as RF signal amplification in electronic devices.
934056691115
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .015 A; Package Body Material: PLASTIC/EPOXY; Terminal Form: GULL WING;
SMA540B
SMA540B by STMicroelectronics is an NPN RF BJT designed for amplifier applications. It features a max collector-emitter voltage of 4.5V, a nominal transition frequency of 42GHz, and comes in a compact surface mount package. Ideal for L-band signal amplification.
MRF426A
Motorola
NPN; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; Maximum Collector Current (IC): 3 A; Minimum DC Current Gain (hFE): 10; Transistor Element Material: SILICON;
BFU520XR
The NXP Semiconductors BFU520XR is an NPN RF BJT transistor with a max fT of 10500 MHz. It has a collector-emitter voltage of 16V and operates in the L band frequency range. Ideal for amplifier applications, it comes in a small outline package with gull wing terminals for surface mount assembly.
TIS62A
TIS62A by Texas Instruments is a NPN BJT transistor with max. power dissipation of 0.5W, fT of 500MHz, and hFE min of 20. It is used in amplifier applications due to its very high frequency band capability and max. collector-emitter voltage of 12V.
CA3146E
Intersil's CA3146E is a NPN BJT with 5 elements, 14 terminals, and fT of 500 MHz. It operates in the VHF band as an amplifier with max IC of 0.05 A and VCE of 30V. The transistor is housed in a plastic/epoxy package with through-hole terminals for RF applications.
2N3866A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 800 MHz; Maximum Power Dissipation (Abs): 5 W; Maximum Collector Current (IC): .4 A;
MMBTH10RG
MMBTH10RG by Onsemi is an NPN RF BJT transistor with a max collector-emitter voltage of 40V and a transition frequency of 450MHz. It is ideal for amplifier applications in the ultra-high-frequency band, featuring a small outline package with gull wing terminals for surface mount assembly. With a DC current gain of at least 50 and a max power dissipation of 0.225W, this transistor operates efficiently at temperatures up to 150°C.
NSVF4020SG4T1G
NSVF4020SG4T1G by Onsemi is an NPN BJT transistor for amplifier applications in KU band. With a max power dissipation of 0.4W, it offers a min hFE of 60 and fT of 16GHz. This small outline package has 4 terminals, operates b/w -55 to 150°C, and supports up to 8V collector-emitter voltage.
BFR93A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3000 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .035 A;
KSC1393Y
The Onsemi KSC1393Y is an NPN RF BJT with a single configuration for amplifier applications. It offers a min power gain of 20 dB, DC current gain of 90, and operates in the very high frequency band up to 700 MHz. With a max collector-emitter voltage of 30V and power dissipation of 0.25W, it is suitable for high-frequency amplification tasks.
MPSH11RLRA
MPSH11RLRA by Onsemi is an NPN RF BJT with a max collector-emitter voltage of 25V and fT of 650MHz. It operates at up to 150 °C, ideal for ultra-high frequency applications in electronics due to its low collector-base capacitance of 0.7pF. This through-hole transistor in a cylindrical package suits high-frequency band circuits.
2N3866
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Power Dissipation (Abs): 5 W; Maximum Collector Current (IC): .4 A;
BFU520XRVL
The NXP Semiconductors BFU520XRVL is a RF Small Signal BJT transistor with NPN polarity. It is designed for amplifier applications in the L Band frequency range, with a max operating temperature of 150°C and a min DC current gain of 60 (hFE). This surface mount transistor has a rectangular package shape and four terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMBTH81
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 600 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .05 A;
The Onsemi MMBTH81 is a PNP RF BJT with 3 terminals, operating in the VHF band. It has a max power dissipation of 0.35W and transition frequency of 600MHz. Ideal for amplifier applications due to its high collector-emitter voltage and small outline package style.
MMBTH81_NL
MMBTH81_NL by Fairchild Semiconductor is a PNP RF BJT transistor with 3 terminals, suitable for amplifier applications in the VHF band. It has a max power dissipation of 0.35W, DC current gain of 60 (hFE), and operates at temperatures up to 150°C. This surface-mount transistor features a small outline package with gull wing terminals.
MMBTH81D87Z
MMBTH81D87Z by National Semiconductor is a PNP BJT transistor with a max collector-emitter voltage of 20V and a nominal transition frequency of 600MHz. It is designed for amplifier applications in the very high-frequency band, featuring a small outline package with gull wing terminals for surface mount assembly.
MMBTH81LT1
MMBTH81LT1 by Onsemi is a PNP RF small signal BJT with a max collector-emitter voltage of 20V and a nominal transition frequency of 600MHz. It is commonly used in applications requiring ultra high frequency band performance, such as wireless communication systems.
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 600 MHz; JESD-30 Code: R-PDSO-G3; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
MMBT918LT1G
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 600 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .05 A;
MMBT5179
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 900 MHz; Maximum Collector Current (IC): .05 A; No. of Terminals: 3;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 900 MHz; Maximum Collector Current (IC): .05 A; Qualification: Not Qualified;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 900 MHz; Maximum Collector Current (IC): .05 A; Terminal Form: GULL WING;
MMBTH11
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 650 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .05 A;
MMBTH11 by Onsemi is a NPN BJT transistor for RF applications. It operates in the very high frequency band with a max fT of 650 MHz. With a collector-emitter voltage of 25V and max power dissipation of 0.35W, it is ideal for amplifier circuits in small outline packages.
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 660 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .05 A;
MMBTH10
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 650 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .05 A;
Panjit International
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 650 MHz; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; JESD-30 Code: R-PDSO-G3;
Secos
MMBTH10L-C-AN3-R
Unisonic Technologies
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 650 MHz; Maximum Collector Current (IC): .05 A; Terminal Form: GULL WING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved