Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: COMPLEX; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Maximum Collector-Emitter Voltage: 8 V;
Median Price
$13.850
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$10.080
100+ parts
$7.340
1k+ parts
$7.220
10k+ parts
-
Renesas
$11.080
$7.037
DigiKey
$7.370
Mouser Electronics
$13.860
$7.870
$7.030
Element14
$17.070
$13.010
$12.960
Nova Conductors
$9.400
Chip Stock
Vyrian
NAC Semi
$8.970
$8.280
ComSIT Distribution GmbH
Netsource Technology, Inc.
Bristol Electronics
Atlantic Semiconductor
Rebound Electronics
Corohmni
$0.374
Aztec Data Supply Inc.
$1.651
Ampacity Inc.
$8.570
Netroflash
$9.212
Continental Prestige Electronics
$10.700
$7.890
Component Stockers USA
$11.720
$8.930
$7.420
Semicontronic
$18.650
$18.184
$18.090
Microchip USA
$34.104
Argo Parts USA
Perfect Parts
Glotronic Ltd.
A-Z Elektronik GmbH
Authorized Procurement Solutions
Futuretech Components
Supply Digital
RF Small Signal Bipolar Junction Transistors (BJT) HFA3046BZ attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Intersil
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
Highest Frequency Band:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
HFA3046BZ Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Japanese semiconductor company Renesas acquired Intersil on February 24, 2017. Intersil Corporation (NASDAQ:ISIL), a wholly owned subsidiary of Renesas Electronics Corporation, is a leading provider of innovative power management and precision analog solutions. The company's products form the building blocks of increasingly intelligent, mobile and power hungry electronics enabling advances in power management to improve efficiency and extend battery life. With a deep portfolio of intellectual property and a rich history of design and process innovation, Intersil is the trusted partner to leading companies in some of the world's largest markets, including the industrial and infrastructure, mobile computing, automotive and aerospace.
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
Bytesonic Electronics
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Weitron Technology
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Alpha & Omega Semiconductor
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Pro-an Electronic
MRF426A
Motorola
NPN; Surface Mount: NO; Maximum Power Dissipation (Abs): 70 W; Maximum Collector Current (IC): 3 A; Minimum DC Current Gain (hFE): 10; Transistor Element Material: SILICON;
KSC2223R
Onsemi
KSC2223R by Onsemi is an NPN RF BJT transistor with a max VCEsat of 0.3V, ideal for amplifier applications in the VHF band. It has a min hFE of 40, operates up to 150 °C, and features a max IC of 0.02A in a small outline package with Gull Wing terminals.
HFA3101BZ96
Renesas Electronics
HFA3101BZ96 by Renesas Electronics is an NPN bipolar junction transistor (BJT) designed for amplifier applications in the ultra high frequency band. With a max operating temperature of 150°C and a max collector-emitter voltage of 8V, it offers a nominal transition frequency of 10,000 MHz.
BFR93AW
Temic Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Collector Current (IC): .05 A; Package Shape: RECTANGULAR;
2SC3838KT146P
ROHM
ROHM 2SC3838KT146P is an NPN BJT transistor with max VCEsat of 0.5V, fT of 3200MHz, and hFE of 82. Ideal for S Band applications, this transistor is a single configuration amplifier in a small outline package suitable for surface mount technology.
2SC5245A-4-TL-E
The Onsemi 2SC5245A-4-TL-E is an NPN RF BJT with a max power dissipation of 0.15W, fT of 5000MHz, and hFE min of 60. Ideal for high-frequency applications in surface-mount configurations due to its low collector current and high operating temperature capabilities.
BF959RLRA
BF959RLRA by Onsemi is a NPN RF BJT with max. 20V VCE, 0.1A IC, and 700MHz fT. Ideal for very high frequency band applications due to its silicon element material and cylindrical package style. Operates at up to 150 °C, making it suitable for various RF small signal designs.
2N5109
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1200 MHz; Maximum Collector Current (IC): .4 A; JESD-609 Code: e0;
MMPQ2369R1
MMPQ2369R1 by Onsemi is a NPN BJT with 4 elements, ideal for amplifier applications. It features a max fT of 550 MHz, VCE of 15V, and IC of 0.5A. The transistor comes in a small outline package with Gull Wing terminals for surface mount assembly.
BFR183E6327HTSA1
Infineon Technologies
BFR183E6327HTSA1 by Infineon Technologies is an NPN RF Small Signal BJT transistor with a max collector-emitter voltage of 12V and a nominal transition frequency of 8000MHz. It is designed for ultra-high frequency band applications such as amplifiers, featuring a small outline package style and Gull Wing terminal form for surface mount assembly.
2N3569
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 60 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .5 A;
LA733P
LA733P by Onsemi is a PNP BJT transistor with 3 terminals, ideal for amplifier applications in the VHF band. It has a max power dissipation of 0.35W, hFE of 200, and operates at up to 150 °C. The package is cylindrical with through-hole terminals and collector-emitter voltage of 48V.
BFR193E6327HTSA1
BFR193E6327HTSA1 by Infineon Technologies is an NPN RF BJT transistor with a max operating temperature of 150°C. It has a min DC current gain of 70 and operates in the ultra-high frequency band up to 8000 MHz. This transistor is commonly used as an amplifier in applications requiring high-frequency signal amplification.
934067697235
NXP Semiconductors
RF Small Signal Bipolar Transistors; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN;
FFB3946
The Onsemi FFB3946 is a RF BJT transistor with NPN and PNP channels, ideal for switching applications. It has 2 elements in a small outline package, with max voltage of 40V and max current of 0.2A. Operating up to 150 °C, it offers a transition frequency of 200MHz for efficient performance.
MPSH17ZL1
MPSH17ZL1 by Onsemi is an NPN RF BJT transistor with a max collector-emitter voltage of 15V and fT of 800MHz. It is used in amplifier applications due to its very high frequency band capability. The package style is cylindrical with a plastic/epoxy body material and through-hole terminals.
BFP196E6327HTSA1
BFP196E6327HTSA1 by Infineon Technologies is a NPN RF BJT transistor with 4 terminals, operating up to 150°C. It has a max fT of 7500 MHz and collector-emitter voltage of 12V, making it ideal for L Band amplifier applications. The package is surface mountable with Gull Wing terminals in a small outline rectangular shape.
2N918
Texas Instruments
2N918 by Texas Instruments is an NPN RF BJT transistor with a max collector-emitter voltage of 15V and max power dissipation of 0.2W. Ideal for ultra high frequency band applications, such as amplifiers, it has a min DC current gain of 20 and operates up to 200°C.
BFQ255
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1300 MHz; Maximum Power Dissipation (Abs): 3 W; Maximum Collector Current (IC): .3 A;
2N2369A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Power Dissipation (Abs): .36 W; Maximum Collector Current (IC): .2 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HFA3046BZ
Integrated Device Technology
NPN; Configuration: COMPLEX; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Qualification: Not Qualified;
Renesas Electronics' HFA3046BZ is an NPN RF BJT with 5 elements and 14 terminals. Operating in the ultra-high frequency band at 8V, it's ideal for amplifier applications. This complex transistor has a max transition frequency of 8000MHz and is surface mountable with a small outline package style.
HFA3127BZ
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Terminal Finish: MATTE TIN; Maximum Collector-Emitter Voltage: 8 V;
Intersil
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; JEDEC-95 Code: MS-012AC;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Minimum DC Current Gain (hFE): 40;
HFA3127RZ
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Moisture Sensitivity Level (MSL): 2; Terminal Form: NO LEAD;
HFA3127RZ96
HFA3127RZ96 by Renesas Electronics is an NPN RF transistor with a max collector-emitter voltage of 8V. It has a nominal transition frequency of 8000MHz, making it suitable for amplifier applications in the ultra-high frequency band. This surface-mount transistor comes in a square chip carrier package with 16 terminals.
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Package Body Material: PLASTIC/EPOXY;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; JESD-609 Code: e3;
HFA3127BZ96
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Package Body Material: PLASTIC/EPOXY; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Transistor Application: AMPLIFIER;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Maximum Time At Peak Reflow Temperature (s): 30;
HFA3096BZ96
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; JESD-30 Code: R-PDSO-G16;
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Transistor Application: AMPLIFIER; Maximum Time At Peak Reflow Temperature (s): 30;
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Maximum Collector-Emitter Voltage: 8 V;
HFA3096BZ
HFA3096BZ by Renesas Electronics is a RF BJT with NPN and PNP channels, 5 elements, and ultra-high frequency band. It is used for amplifier applications in small outline packages with 16 terminals. With a max fT of 8000 MHz, it offers high performance in compact designs.
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Package Style (Meter): SMALL OUTLINE;
HFA3046B-T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved