Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Renesas Electronics' HFA3127BZ96 is an NPN RF BJT with 5 elements, ideal for amplifier applications in the ultra-high frequency band. It features a max collector-emitter voltage of 8V and a nominal transition frequency of 8000MHz. This surface-mount transistor has a small outline package with 16 terminals in gull-wing form.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Corohmni
$0.353
Aztec Data Supply Inc.
$0.630
AZTECH Wire
$7.522
Ampacity Inc.
$14.050
Microchip USA
$27.261
Semicontronic
$42.050
$40.999
$40.788
Component Stockers USA
$97.180
Argo Parts USA
Supply Digital
Continental Prestige Electronics
Authorized Procurement Solutions
Bastille Electronics
Plastic/epoxy material provides good insulation and protection for the transistor, making it durable and reliable.
NPN type transistors are commonly used in amplification circuits, ensuring compatibility.
Separate configuration with 5 elements allows for precise control and customization in circuit designs.
Designed specifically for amplifier applications, ensuring optimal performance in amplification tasks.
Surface mount capability allows for easy and convenient installation on circuit boards.
Rectangular shape makes it easy to place and secure the transistor within the circuit.
Gull wing terminals provide strong mechanical support for the transistor, reducing the risk of damage during handling.
Capable of operating in ultra high frequency bands, making it suitable for high-speed communication applications.
Having 5 elements allows for more versatile circuit designs and better performance.
Having 16 terminals provides more connection options and flexibility in circuit connections.
Small outline package style saves space on the circuit board, ideal for compact designs.
With a maximum voltage rating of 8V, it can handle a wide range of voltage levels in the circuit.
Silicon-based transistors offer high performance and reliability, ensuring long-term functionality.
Matte tin finish provides good conductivity and solderability, ensuring secure connections.
Dual terminal position allows for easy installation and soldering on the circuit board.
MSL level 3 indicates that the transistor can withstand moderate exposure to moisture during assembly and operation.
30-second maximum time at peak reflow temperature ensures proper soldering and prevents overheating.
With a peak reflow temperature of 260°C, it can withstand high-temperature soldering processes without damage.
High transition frequency of 8000 MHz ensures fast and efficient signal amplification, ideal for high-frequency applications.
RF Small Signal Bipolar Junction Transistors (BJT) HFA3127BZ96 attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Renesas Electronics
Additional Features:
Maximum Collector-Emitter Voltage:
Configuration:
Highest Frequency Band:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
HFA3127BZ96 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Semitronics
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Fairchild Semiconductor
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
B340A-13-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BF224
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 850 MHz; Maximum Collector Current (IC): .05 A; No. of Elements: 1;
BFU530WX
NXP Semiconductors
The NXP Semiconductors BFU530WX is an RF BJT transistor with NPN polarity, suitable for amplifier applications in the L Band. It has a max operating temperature of 150°C, a collector-emitter voltage of 12V, and a transition frequency of 11GHz. This small outline transistor comes in a plastic/epoxy package with gull wing terminals for surface mount assembly.
BFR193FH6327XTSA1
Infineon Technologies
BFR193FH6327XTSA1 by Infineon Technologies is a NPN RF BJT transistor with 3 terminals, suitable for L Band applications. It has a max collector-emitter voltage of 12V, max collector current of 0.08A, and transition frequency of 8000MHz. Ideal for amplifier circuits in automotive electronics due to AEC-Q101 compliance.
2N3904
Thomson-csf Semiconductors
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Qualification: Not Qualified; Terminal Position: BOTTOM;
15GN01CA-TB-E
RF Small Signal Bipolar Transistors; Terminal Finish: Tin/Bismuth (Sn/Bi); Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e6;
BF771E6327HTSA1
Infineon's BF771E6327HTSA1 is a NPN BJT transistor with 12V VCEO, 8000MHz fT, and 0.08A IC. Ideal for amplifier applications, it comes in a small outline package with Gull Wing terminals for surface mount assembly. Operating up to 150°C, it features low collector-base capacitance of 1pF.
BF495C
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .03 A;
2N3866
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .4 A; Package Body Material: METAL; JESD-30 Code: O-MBCY-W3;
2N2369A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Power Dissipation (Abs): .36 W; Maximum Collector Current (IC): .2 A;
2N4996
2N4996 by Texas Instruments is an NPN RF BJT with a max. collector-emitter voltage of 18V, ideal for amplifier applications in the VHF band. It has a min. DC current gain of 50 and operates at up to 150°C, with a transition frequency of 600MHz for high-frequency performance.
2N3866A
Advanced Power Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 800 MHz; Maximum Collector Current (IC): .4 A; Package Style (Meter): CYLINDRICAL;
START540
START540 by STMicroelectronics is an NPN RF BJT designed for amplifier applications. It features a max collector current of 40 mA, operates up to 150 °C, and boasts a nominal transition frequency of 45 GHz. Its compact surface mount design ensures efficient performance in C band communications.
934056947115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 7000 MHz; Maximum Collector Current (IC): .2 A; JESD-30 Code: R-PSSO-F3;
2N2857
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1000 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .04 A;
TIS63A
TIS63A by Texas Instruments is an NPN BJT transistor with a max fT of 500 MHz. It has a max IC of 0.03 A and hFE of 30, ideal for amplifier applications. The package is cylindrical with 3 terminals, suitable for very high frequency band circuits.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 500 MHz; Maximum Collector Current (IC): .4 A; JEDEC-95 Code: TO-205AD;
MSC2295-BT1
The Onsemi MSC2295-BT1 is an NPN RF BJT transistor with 3 terminals, ideal for amplifier applications. It has a max operating temp of 150 °C, fT of 150 MHz, and hFE of 70. The package is small outline with gull wing terminals, suitable for surface mount assembly.
BFT92W
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 5000 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .025 A;
SD1143-1
NPN; Surface Mount: NO; Transistor Element Material: SILICON;
BFR92PE6327
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 5000 MHz; Maximum Collector Current (IC): .03 A; Terminal Position: DUAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HFA3046BZ
Integrated Device Technology
NPN; Configuration: COMPLEX; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Qualification: Not Qualified;
Renesas Electronics
Renesas Electronics' HFA3046BZ is an NPN RF BJT with 5 elements and 14 terminals. Operating in the ultra-high frequency band at 8V, it's ideal for amplifier applications. This complex transistor has a max transition frequency of 8000MHz and is surface mountable with a small outline package style.
Intersil
NPN; Configuration: COMPLEX; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Maximum Collector-Emitter Voltage: 8 V;
HFA3127BZ
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Terminal Finish: MATTE TIN; Maximum Collector-Emitter Voltage: 8 V;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; JEDEC-95 Code: MS-012AC;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Minimum DC Current Gain (hFE): 40;
HFA3127RZ
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Moisture Sensitivity Level (MSL): 2; Terminal Form: NO LEAD;
HFA3127RZ96
HFA3127RZ96 by Renesas Electronics is an NPN RF transistor with a max collector-emitter voltage of 8V. It has a nominal transition frequency of 8000MHz, making it suitable for amplifier applications in the ultra-high frequency band. This surface-mount transistor comes in a square chip carrier package with 16 terminals.
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Package Body Material: PLASTIC/EPOXY;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; JESD-609 Code: e3;
HFA3127BZ96
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Transistor Application: AMPLIFIER;
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Maximum Time At Peak Reflow Temperature (s): 30;
HFA3096BZ96
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; JESD-30 Code: R-PDSO-G16;
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Transistor Application: AMPLIFIER; Maximum Time At Peak Reflow Temperature (s): 30;
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Maximum Collector-Emitter Voltage: 8 V;
HFA3096BZ
HFA3096BZ by Renesas Electronics is a RF BJT with NPN and PNP channels, 5 elements, and ultra-high frequency band. It is used for amplifier applications in small outline packages with 16 terminals. With a max fT of 8000 MHz, it offers high performance in compact designs.
NPN AND PNP; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Package Style (Meter): SMALL OUTLINE;
HFA3127B96
NPN; Configuration: SEPARATE, 5 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 8000 MHz; Maximum Collector Current (IC): .037 A; Terminal Finish: TIN LEAD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved