Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TND316S by Onsemi is a CMOS peripheral driver with 8 terminals in a small outline package. It operates b/w -40 °C to 125°C, suitable for automotive applications. With dual terminal position and gull wing form, it supports power supplies from 4.5V to 25V.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Problanco Electronics
SupplyDigital Components
TANS Electronics
Corphita
UHIMA Technologies
Kulean Microsystems
Corohmni
The use of plastic/epoxy material makes the product durable and resistant to damage, ensuring longevity and reliability.
Being surface mountable, this product is compact and easy to install, saving space and facilitating efficient PCB design.
With a wide range of power supply options (4.5V to 25V), this product can be compatible with various voltage requirements, offering flexibility in application.
The rectangular package shape allows for easy integration into electronic circuits, optimizing space usage and enhancing design aesthetics.
With a high maximum operating temperature of 125 °C, this product can function reliably in demanding environments without overheating or performance degradation.
CMOS technology ensures low power consumption and high noise immunity, making this product energy-efficient and suitable for noise-sensitive applications.
Peripheral Drivers TND316S attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Driver No. of Bits:
JESD-30 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
TND316S Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Daco Semiconductor
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
VNB14NV04TR-E
STMicroelectronics
VNB14NV04TR-E by STMicroelectronics is a Peripheral Driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 18A and turn-on time of 4.5us. This small outline package driver is ideal for applications requiring sink output current flow direction.
L6201PSTR
L6201PSTR by STMicroelectronics is a full bridge peripheral driver with 1A output current, 48V max supply voltage, and built-in transient protection. It is ideal for applications requiring source and sink output current flow direction in a compact small outline package.
BSP772TXT
BSP772TXT by Infineon is a Peripheral Driver with built-in protections for transient, over current, over voltage, and under voltage. It operates at a max supply voltage of 34V and has a nominal output peak current limit of 17A. Ideal for industrial applications requiring a small outline package style with sink output current flow direction.
TPS22916BYFPR
TPS22916BYFPR by Texas Instruments is a 4-terminal peripheral driver with a supply voltage range of 1V to 5.5V. It offers transient protection, operates in industrial temperature range (-40°C to 85°C), and has a peak reflow temperature of 260°C. Ideal for buffer or inverter applications requiring source current flow direction.
SN6507DGQR
SN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates b/w -55 to 125°C, making it suitable for various industrial applications requiring buffer or inverter-based interface ICs in compact designs.
VN808CM-32-E
STMicroelectronics' VN808CM-32-E is a peripheral driver with 8 functions, operating at 10.5-32V, offering thermal and under voltage protection. Ideal for automotive applications, it has a max supply voltage of 45V, turn-on time of 100us, and turn-off time of 150us.
NCP51810AMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
SN75451BP
SN75451BP by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It has open-collector output polarity and can handle up to 0.5A of current flow. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature environments.
LMD18200T
LMD18200T by Texas Instruments is a peripheral driver with a max supply voltage of 55V and built-in protections for transient, thermal, and under voltage. It has a max output current of 6A and operates in automotive temperature grades. This HB-based peripheral driver with PWM is ideal for applications requiring high current sourcing and sinking capabilities.
UDN2987A-6-T
Allegro MicroSystems
Allegro MicroSystems' UDN2987A-6-T is a 20-terminal peripheral driver with built-in transient, over current, and thermal protections. Operating at 4.75-35 V, it offers a max output current of 0.35 A and turn-on/off time of 1 us. Ideal for applications requiring sink flow direction in buffer or inverter-based interface ICs.
BTS442E2E3062AXT
BTS442E2E3062AXT by Infineon Technologies is a peripheral driver with a max supply voltage of 42V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This MOS technology-based device has a nominal output peak current limit of 70A and is commonly used as a buffer or inverter based peripheral driver.
TPS272C45ARHFR
TPS272C45ARHFR by Texas Instruments is a peripheral driver with 2 functions, operating at 6-36V. It offers built-in protections against transient, over current, and over voltage. Ideal for automotive applications due to its high side driver and low turn-on/off times.
AUIR2085STR
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NUD3112LT1G
NUD3112LT1G by Onsemi is a CMOS technology-based peripheral driver with a max output current of 0.5A. It features built-in transient protection and operates in industrial temperature grade range (-40 to 85°C). This small outline, thin profile device is ideal for applications requiring sink output current flow direction.
TPS4H160BQPWPRQ1
TPS4H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It features built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver capability.
MIC5891YWM-TR
Microchip Technology
MIC5891YWM-TR by Microchip Tech is a Peripheral Driver with 8 bits, 12V max supply voltage, and 5V min supply voltage. It has a small outline package style and operates in industrial temperature range. Ideal for buffer or inverter-based peripheral driver applications due to its open-emitter output characteristics and built-in transient protection.
VNQ5160KTR-E
STMicroelectronics' VNQ5160KTR-E is a peripheral driver with 4 functions, operating at 8-36V. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a compact design and fast turn-on/off times like automotive systems.
L293DDWP
L293DDWP by Texas Instruments is a half bridge peripheral driver with 2 functions, operating at 5V nominal voltage. It offers built-in transient and thermal protections, with a max supply voltage of 36V. Ideal for applications requiring source and sink output current flow direction in commercial temperature grade environments.
VND830SP-E
VND830SP-E by STMicroelectronics is a 2-function peripheral driver with max supply voltage of 36V. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a source output current flow direction and nominal output peak current limit of 9A.
ITS4300SSJDXUMA1
Infineon Technologies' ITS4300SSJDXUMA1 is a peripheral driver with a max supply voltage of 34V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This small outline package (4mm x 5mm) is suitable for applications requiring buffer or inverter based interface ICs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TND321VD-TL-E
HALF BRIDGE BASED PERIPHERAL DRIVER; JESD-609 Code: e6; Terminal Finish: Tin/Bismuth (Sn/Bi); Moisture Sensitivity Level (MSL): 1;
Sanyo Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER;
TND321VD-TL-H
HALF BRIDGE BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6;
TND314S-TL-2H
HALF BRIDGE BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1;
TND321VD
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: FLAT; No. of Terminals: 8; Package Code: VSOF; Package Shape: RECTANGULAR;
TND30SS
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TND308TD
Peripheral Drivers; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
TND314S-TL-E
TND314S-TL-E by Onsemi is a CMOS peripheral driver with 8 terminals, operating b/w -40°C to 125°C. It has a power supply range of 4.5V to 25V and is suitable for automotive applications due to its tin/bismuth terminal finish and small outline package style.
TND311S
Peripheral Drivers; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TND315S
TND315S-TL-2H
TND316S-TL-E
TND314S
TND312S
TND315S-TL-E
TND307TD
TND309TD
TND313S
TND316S-TL-2H
Sanyo Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved