Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TND308TD by Onsemi is an 8-terminal peripheral driver with a supply voltage of 18V. It features CMOS technology, operates in automotive-grade temperatures (-40 to 125 °C), and has a small outline package for surface mounting applications. Ideal for driving peripherals in automotive electronics due to its high voltage tolerance and compact design.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
SupplyDigital Components
TANS Electronics
Problanco Electronics
Corphita
Kulean Microsystems
Corohmni
UHIMA Technologies
Lightweight and durable material for easy handling and long-lasting product life.
Easy to install and saves space on PCB.
Suitable for various applications requiring a power supply of 18 volts.
Can withstand high operating temperatures without affecting performance.
Can operate in low temperature environments without issues.
Ideal for use in automotive applications where temperature fluctuations are common.
Uses Complementary Metal-Oxide-Semiconductor technology for efficient operation.
Matches the power supply voltage requirement for seamless integration.
Provides sufficient control and flexibility for driving peripheral devices.
Peripheral Drivers TND308TD attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Driver No. of Bits:
JESD-30 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
TND308TD Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Telcom Semiconductor
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
Hitano Enterprise
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semicoa
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
IRS21531DSPBF
Infineon Technologies
IRS21531DSPBF by Infineon is a CMOS half bridge peripheral driver with 8 terminals. It operates b/w -40 to 125 °C and has built-in under voltage protection. With a supply voltage range of 10.1V to 15.4V, it is ideal for automotive applications requiring source and sink output current flow direction.
IRS21844MPBF
International Rectifier
IRS21844MPBF by International Rectifier is a peripheral driver with 20V max supply voltage, 15V power supplies, and 2.3A output current limit. Ideal for automotive applications, it features transient protection and operates b/w -40 to 125 °C.
IRS21844STRPBF
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
VND5E160JTR-E
STMicroelectronics
VND5E160JTR-E by STMicroelectronics is a peripheral driver with a small outline package shape and dual terminal position. It operates at power supplies of 8/28V and has a max time at peak reflow temperature of 30s. This CMOS technology-based IC is commonly used as a half bridge-based peripheral driver for sink output current flow direction applications.
AUIR3315STRL
AUIR3315STRL by Infineon is a 5-terminal peripheral driver with built-in protections for automotive applications. It operates b/w -40 to 150 °C, with a supply voltage range of 6-32 V and max output current of 14 A. This small outline package features gull wing terminals and offers fast turn-on/off times suitable for buffer or inverter-based interfaces.
BTS3110NHUMA1
BTS3110NHUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, and thermal issues. It features a small outline, low profile package style with 4 terminals in a gull wing form. This interface IC type has a nominal output peak current limit of 7.5A and is suitable for applications requiring sink output current flow direction.
PTPS1HC100BQPWPRQ1
PTPS1HC100BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 14 terminals, operating voltage range of 3-28V, and AEC-Q100 screening. It offers built-in protections for transient and over current events. Ideal for automotive applications due to its high side driver feature and compact rectangular package design.
VND5050KTR-E
VND5050KTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates within a supply voltage range of 4.5V to 36V and has 24 terminals in a small outline package style. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
LMD18200-2D/883
National Semiconductor
HB BASED PERIPHERAL DRIVER WITH PWM; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
L293DNEE4
L293DNEE4 by Texas Instruments is a half bridge based peripheral driver with 2 functions, 16 terminals, and a max output current of 1.2A. It operates b/w -40 to +70°C and is ideal for driving inductive loads in robotics and motor control applications.
L6201PS
L6201PS by STMicroelectronics is a full bridge peripheral driver with 5A output current limit, suitable for applications requiring source and sink flow direction. It operates at supply voltages ranging from 12V to 48V, featuring built-in thermal protection. The small outline package with gull wing terminals makes it ideal for compact designs in various electronic systems.
TPS22916CNYFPR
TPS22916CNYFPR by Texas Instruments is a peripheral driver with max supply voltage of 5.5V, min supply voltage of 1V, and industrial temp grade. It has built-in transient protections and is ideal for buffer or inverter based applications requiring source current flow direction.
FSFR2100XS
FSFR2100XS by Onsemi is a half bridge peripheral driver with 9 terminals in a rectangular package. It offers over current, over voltage, thermal, and under voltage protection. Ideal for applications requiring source and sink output current flow control.
UDN2987LW
Allegro MicroSystems
Allegro MicroSystems' UDN2987LW is a peripheral driver with 8 functions, operating voltage range of 7-35V, and built-in protections. Ideal for applications requiring source output current flow direction, this small outline driver has a turn-on time of 0.6us and nominal output peak current limit of 0.5A.
MIC94090YC6-TR
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
L298P
L298P by STMicroelectronics is a full bridge peripheral driver with 2 functions, operating at a supply voltage range of 4.5V to 46V. It features built-in protections for over current and thermal issues, making it suitable for various applications requiring source and sink output current flow direction. The package style is small outline with heat sink, ideal for space-constrained designs.
PTPS1H200AQDGNRQ1
PTPS1H200AQDGNRQ1 by Texas Instruments is a Peripheral Driver with 8 terminals, operating voltage range of 4-40V, and built-in protections against transient, over current, and thermal issues. It is designed for automotive applications with a small outline package style and AEC-Q100 screening level.
BTS432E2E3062A
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Built-in Protections: OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE; Package Style (Meter): SMALL OUTLINE;
LM3525MX-H/NOPB
LM3525MX-H/NOPB by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections for transient, over current, thermal, and under voltage. It has an output current limit of 1A and is ideal for automotive applications due to its temperature grade.
VN750PT-E
STMicroelectronics' VN750PT-E is a 5-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TND321VD-TL-E
HALF BRIDGE BASED PERIPHERAL DRIVER; JESD-609 Code: e6; Terminal Finish: Tin/Bismuth (Sn/Bi); Moisture Sensitivity Level (MSL): 1;
Sanyo Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER;
TND321VD-TL-H
HALF BRIDGE BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6;
TND314S-TL-2H
HALF BRIDGE BASED PERIPHERAL DRIVER; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 1;
TND321VD
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: FLAT; No. of Terminals: 8; Package Code: VSOF; Package Shape: RECTANGULAR;
TND30SS
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TND314S-TL-E
TND314S-TL-E by Onsemi is a CMOS peripheral driver with 8 terminals, operating b/w -40°C to 125°C. It has a power supply range of 4.5V to 25V and is suitable for automotive applications due to its tin/bismuth terminal finish and small outline package style.
TND311S
Peripheral Drivers; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TND315S
TND315S-TL-2H
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TND316S-TL-E
TND314S
TND312S
TND315S-TL-E
TND316S
TND307TD
Peripheral Drivers; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
TND309TD
TND313S
TND316S-TL-2H
TND308TD
Sanyo Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved