Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMA3004 by Onsemi is a wide band medium power RF amplifier with 20 dB gain and 2500 MHz max operating frequency. It operates at temperatures from -40 to 85 °C, with a max input power of 0 dBm. Ideal for applications requiring surface mount amplification in RF & microwave systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Problanco Electronics
Kulean Microsystems
TANS Electronics
Corphita
Corohmni
UHIMA Technologies
SupplyDigital Components
This material provides durability and protection for the internal components of the amplifier, ensuring long-term reliability.
The high maximum input power allows for strong signal amplification without risking damage to the amplifier.
The component-based construction ensures high performance and precision in signal amplification.
Operates on a standard voltage supply, making it easy to integrate into various systems.
The multiple terminals provide flexibility in connecting the amplifier to different components or devices.
Can operate efficiently in high-temperature environments, ensuring reliability in various conditions.
Can operate in extremely cold temperatures, making it suitable for use in a wide range of environments.
Low supply current requirement helps in reducing power consumption and heat dissipation.
Wide band medium power capabilities allow for amplification of signals across a broad frequency range.
Matches with standard impedance levels, ensuring optimal signal transfer and performance.
Offers significant signal amplification, improving the overall performance of the system.
Surface mount capability makes installation easy and efficient in various applications.
Can amplify signals up to a high frequency range, suitable for numerous RF and microwave applications.
RF & Microwave Amplifiers SMA3004 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Onsemi
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Maximum Supply Current:
SMA3004 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
Rugao Dachang Electronic
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
QPA9421TR13
Qorvo
NARROW BAND HIGH POWER;
HMC6981LS6
Analog Devices
Analog Devices' HMC6981LS6 is a wide band high power RF amplifier with 23 dB gain, operating from 15-20 GHz. It has a max input power of 18 dBm and operates on a 5.5V supply, drawing up to 1100 mA. Ideal for applications requiring high power amplification in the RF & Microwave domain.
HMC635LC4TR
Analog Devices' HMC635LC4TR is a wide band low power RF amplifier with 24 terminals, operating at temperatures from -55 to 70°C. Utilizing GaAs technology, it requires a 5V power supply and features a ceramic package for surface mount applications in RF & microwave systems.
TSS-53LNB+
Mini-circuits
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: E-PHEMT; Power Supplies (V): 5;
SMA3103-TL-E
Sanyo Semiconductor
WIDE BAND LOW POWER;
BGA231N7E6330XTSA1
Infineon Technologies
Infineon's BGA231N7E6330XTSA1 is a RF amplifier with 16dB gain, operating from 1550-1615MHz. It has a max input power of 0dBm and operates in temperatures ranging from -40 to 85°C. Ideal for narrowband low-power applications requiring a component construction.
HMC478MP86ETR
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SL,4GW-LD,.085CIR;
HMC797APM5E
HMC797APM5E by Analog Devices is a wide band medium power RF amplifier with 13 dB gain and 27 dBm max input power. With a VSWR of 7, it operates from 0 to 22000 MHz, making it ideal for high-frequency applications in RF and microwave systems. The component has a temperature range of -40 to 85°C and features nickel palladium gold terminal finish.
TGA2578-CP
TGA2578-CP by Qorvo is a GAN technology RF amplifier with 26 dB gain, operating from 2-6 GHz. It has a max input power of 25 dBm and VSWR of 10, suitable for wideband high-power applications. This module features -2.8V/28V power supplies, surface mounting, and requires 400mA supply current.
MGA-86576-STR
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: METAL; Technology: GAAS; Characteristic Impedance: 50 ohm;
AM-147-PIN
M/a-com Technology Solutions
WIDE BAND MEDIUM POWER; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 85 Cel; Maximum Voltage Standing Wave Ratio: 2; Gain: 15.5 dB; Construction: COMPONENT;
SST12LP08-QXBE
Silicon Storage Technology
NARROW BAND MEDIUM POWER; Maximum Input Power (CW): 5 dBm; Additional Features: HIGH RELIABILITY; Maximum Operating Frequency: 2484 MHz; Gain: 29 dB; Maximum Operating Temperature: 85 Cel;
ERA-50SM+
ERA-50SM+ by Mini-circuits is a wide band low power RF amplifier with 16 dB gain, operating from 0 to 1500 MHz. It has a max input power of 13 dBm and VSWR of 1.2, making it ideal for RF & microwave applications requiring surface mount amplification in the temperature range of -45 to 85°C.
NBB-310-T1
Qorvo's NBB-310-T1 is a ceramic RF amplifier with 20 dBm CW input power, 9 dB gain, and 50 ohm impedance. Ideal for wide band low power applications from 0 to 12000 MHz, it operates b/w -45°C to 85°C. Suitable for surface mount installations with a voltage supply of 5V.
RFPA3800TR7
The Qorvo RFPA3800TR7 is a GAAS wide band high power amplifier with 12 dB gain, operating from 150 MHz to 960 MHz. It has a max input power of 28 dBm and VSWR of 5, suitable for RF & microwave applications requiring up to 700 mA at 7V supply voltage.
QPA9419
RF/Microwave Amplifiers;
ADL5535ARKZ-R7
ADL5535ARKZ-R7 by Analog Devices is a wide band low power RF amplifier with 14.9 dB gain, operating from 20 MHz to 1000 MHz. It can handle up to 20 dBm CW input power and operates b/w -40°C to 85°C. Ideal for RF and microwave applications requiring high gain and broad frequency coverage.
NPA1006A-TR0500
NPA1006A-TR0500 by M/a-com: RF amplifier with 12.5dB gain, 20-1000MHz frequency range, and 50 ohm impedance. Ideal for wideband high-power applications in temperatures from -40 to 85°C. Package material is plastic/epoxy, suitable for surface mount installation with 8 terminals.
QPL9547TR7
QPL9547TR7 by Qorvo is a wide band low power RF amplifier with 17.5 dB gain, operating from 100 MHz to 6000 MHz. It has a max input power of 22 dBm and VSWR of 1.54, suitable for surface mount applications in RF & microwave systems requiring high performance amplification.
CA70-2
Tyco Electronics M/a-com
WIDE BAND LOW POWER; Construction: COAXIAL; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -54 Cel; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 2.3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMA3107-TL-E
WIDE BAND LOW POWER; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6;
SMA3102-TL-H
WIDE BAND LOW POWER; JESD-609 Code: e6; Terminal Finish: Tin/Bismuth (Sn/Bi);
SMA3109
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
SMA3109-TL-E
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
SMA3101
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TSSOP6,.08;
SMA3103
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TSSOP6,.08; No. of Functions: 1;
SMA3117
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 28 mA; Maximum Operating Temperature: 85 Cel;
SMA3101-TL-E
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Gain: 21.5 dB;
SMA3107
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
SMA3102TL
WIDE BAND LOW POWER; Gain: 21.5 dB; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
SMA3109TL
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Construction: COMPONENT;
SMA3006
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 0 dBm; Gain: 14 dB;
SMA3001
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3; Package Equivalence Code: TSSOP6,.08;
SMA3005
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 0 dBm; Maximum Supply Current: 8 mA;
SMA3102
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Gain: 21.5 dB; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel;
SMA3107TL
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Gain: 21 dB; Characteristic Impedance: 50 ohm;
Sanyo Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved