Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Gain: 13 dB; Characteristic Impedance: 50 ohm;
Median Price
$3.683
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$2.805
100+ parts
-
1k+ parts
10k+ parts
Bristol Electronics
$4.560
$2.280
Chip Stock
Vyrian
Speed Components Ltd
ACDS - Activité Composants Distribution Service
Cogito LLC
Manotoh
Inventory MP
Component Sense
EPE Components Inc.
Lantek
Diverse Electronics
QIE Inc.
ComSIT Distribution GmbH
Aztec Data Supply Inc.
$1.446
Corohmni
$2.660
Advanced Electronics
$2.740
$2.603
Continental Prestige Electronics
$2.749
Argo Parts USA
AZTECH Wire
$9.437
Resion (Excess)
Perfect Parts
S.R.D Solutions
Futuretech Components
Kepictronics
Robosynatics
Lucentia Tech
Authorized Procurement Solutions
RF & Microwave Amplifiers TQP3M9028 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Triquint Semiconductor
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Merger of RFMD and TriQuint is now Complete, Qorvo Emerges as a New Leader in RF Solutions GREENSBORO, N.C. and HILLSBORO, Ore. – January 2, 2015 – RF Micro Devices, Inc. and TriQuint Semiconductor, Inc. announced today they have completed their merger of equals to form Qorvo™ (Nasdaq: QRVO), a new leader in RF solutions. Qorvo is expected to begin trading today on the NASDAQ Global Stock Market. "This is an important milestone for our Company, employees, customers, shareholders and our industry," said Qorvo President and CEO Bob Bruggeworth. "Qorvo brings under one roof all the critical RF building blocks needed to simplify design, reduce size and conserve power, while improving system performance across mobile, infrastructure, and aerospace and defense applications. Our goal is to build the most valuable company in our space, and the global Qorvo team is eager to deliver the value our stakeholders expect.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Devices
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Semiconductors
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
HMC441LP3
Analog Devices
HMC441LP3 by Analog Devices is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. Operating from 6.5 GHz to 13.5 GHz, it has a max input power of 15 dBm and requires a 5V supply at 115 mA. Ideal for applications requiring high frequency amplification in RF and microwave systems.
XP1035-QH-0G0T
Mimix Broadband
WIDE BAND HIGH POWER; Maximum Operating Temperature: 85 Cel; Gain: 26 dB; Maximum Input Power (CW): 15 dBm; Minimum Operating Frequency: 5900 MHz; Minimum Operating Temperature: -55 Cel;
XP1039-QJ-0G00
M/a-com Technology Solutions
XP1039-QJ-0G00 by M/a-com Technology Solutions is a wide band high power RF & microwave amplifier with a gain of 15.5 dB. It operates in the frequency range of 5600 MHz to 7100 MHz and can handle a max input power of 25 dBm. This component is suitable for applications requiring high power amplification in RF and microwave systems.
ADL8121ACPZN
ADL8121ACPZN by Analog Devices is a PHEMT RF amplifier with 15dB gain, 32dBm CW input power, and 1.43 VSWR. Ideal for wideband low-power applications in the RF & microwave field, it operates from -40°C to 85°C with a frequency range of 25MHz to 12GHz.
HMC451LP3E
HMC451LP3E by Analog Devices is a GAAS RF amplifier with 12.5 dB gain, operating from 5V supply at frequencies ranging from 5-18000 MHz. With a max input power of 10 dBm, it is ideal for wide band low power applications in RF and microwave systems requiring surface mount components.
HMC441LC3B
Analog Devices' HMC441LC3B is a wide band medium power RF amplifier with 10 dB gain, operating from 6-18 GHz. It has a max input power of 15 dBm and operates on a 5V supply, drawing 115 mA. Ideal for RF & microwave applications requiring high performance in plastic/epoxy package.
HMC797LP5ETR
Hittite Microwave
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 10;
HMC414MS8GETR
NARROW BAND MEDIUM POWER; JESD-609 Code: e3; Maximum Operating Frequency: 2800 MHz; Maximum Input Power (CW): 17 dBm; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
ADL8106ACEZ-R7
WIDE BAND LOW POWER;
MGA-81563-TR1G
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 100 MHz;
HMC409LP4ETR
HMC409LP4ETR by Analog Devices is a RF amplifier with 28 dB gain, operating frequency range of 3.3-3.8 GHz, and max input power of 10 dBm. It is designed for narrowband medium power applications in RF & microwave systems requiring a characteristic impedance of 50 ohms. The component features a surface mount package body material made of plastic/epoxy, suitable for temperatures ranging from -40 to 85°C.
MAAM-011290-DIE
MAAM-011290-DIE by M/a-com Technology Solutions is a wide band medium power RF amplifier with 16.5 dB gain, operating from 5-20 GHz. It has a max input power of 10 dBm and VSWR of 1.58, suitable for surface mount applications in RF & microwave systems.
ALM-1412-BLKG
Broadcom
ALM-1412-BLKG by Broadcom is a GAAS RF amplifier with 11dB gain, operating from 0-1575MHz. It has a max input power of 15dBm and requires 1/2.85V supply. Ideal for wideband low-power applications due to its 50Ω impedance and plastic/epoxy package construction.
HMC8411LP2FE
Analog Devices' HMC8411LP2FE is a wide band low power RF amplifier with 11 dB gain and 20 dBm CW input power. Operating from 10 MHz to 10 GHz, it is ideal for RF & microwave applications requiring high performance in temperatures ranging from -40°C to 85°C.
HMC636ST89
HMC636ST89 by Analog Devices is a GAAS technology RF amplifier with 5dB gain, operating from 200MHz to 4GHz. It has a max input power of 16dBm and operates on a 5V power supply. Ideal for wideband low-power applications, this component is designed for surface mounting in RF and microwave systems.
RA35H1516M
Mitsubishi Electric
Mitsubishi Electric's RA35H1516M is a narrow band high power RF amplifier module with 20 dBm CW input power and VSWR of 3. Operating from -30°C to 110°C, it covers frequencies b/w 154-162 MHz. Ideal for applications requiring high-power amplification in the RF & microwave domain.
TQP3M9019
Triquint Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 4000 MHz; No. of Functions: 1;
XL1000-BD-000V
XL1000-BD-000V by M/a-com Technology Solutions is a GAAS RF amplifier with 12dB gain, operating b/w 20-40 GHz. It has a max input power of 12 dBm and requires a 5V power supply. Ideal for wideband low-power applications in RF & microwave systems due to its compact construction and temperature range of -55 to 85°C.
SKY65111-348LF
Skyworks Solutions
SKY65111-348LF by Skyworks Solutions is a narrow band medium power RF amplifier with 39.5 dB gain, operating from 600 MHz to 1100 MHz. It has a max input power of 10 dBm and VSWR of 8, suitable for applications requiring high-frequency amplification in the RF & Microwave domain. The component is designed for surface mount installation and operates within a temperature range of -40°C to 85°C.
CMD283C3
Qorvo
Qorvo's CMD283C3 is a wide band low power RF amplifier with 18 dB gain and 50 ohm impedance. It operates from 2-6 GHz, handles up to 20 dBm CW input power, and has a temperature range of -40 to 85°C. Ideal for RF & microwave applications requiring high performance in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TQP3M9028
The Qorvo TQP3M9028 is a wide band medium power RF amplifier with 13 dB gain and 50 ohm impedance. It operates from 50 MHz to 4000 MHz, with a max input power of 23 dBm. Suitable for surface mount applications in RF and microwave systems, it has a plastic/epoxy package body and requires a 5V power supply.
TQP3M9008
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Construction: COMPONENT;
TQP3M9008 by Qorvo is a wide band medium power RF amplifier with 19 dB gain and 50 ohm impedance. It operates from 50 MHz to 4000 MHz, with a max input power of 23 dBm. Ideal for RF applications requiring high performance in plastic/epoxy package.
TQP3M9009
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 150 mA;
TQP3M9009 by Qorvo is a wide band medium power RF amplifier with 20 dB gain and 50 ohm impedance. It operates from 50 MHz to 4000 MHz, with a max input power of 23 dBm. This component is ideal for applications requiring high frequency amplification in RF and microwave systems.
TQP3M9037
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 22 dBm; Minimum Operating Temperature: -40 Cel;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Characteristic Impedance: 50 ohm;
TQP3M9035
WIDE BAND MEDIUM POWER; Construction: COMPONENT; Maximum Input Power (CW): 23 dBm; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 50 MHz;
The Qorvo TQP3M9035 is a wide band medium power RF amplifier with 15 dB gain, suitable for frequencies ranging from 50 MHz to 6 GHz. It can handle up to 23 dBm of CW input power and operates in temperatures from -40°C to 85°C. Ideal for RF and microwave applications requiring high performance amplification.
TQP3M9018
The Qorvo TQP3M9018 is a wide band medium power RF amplifier with 19 dB gain and 50 ohm impedance. It operates from 50 MHz to 4000 MHz, handling up to 23 dBm CW input power. This component is ideal for applications requiring high frequency amplification in plastic/epoxy packages.
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 50 MHz; Minimum Operating Temperature: -40 Cel;
TQP3M9019 by Qorvo is a wide band medium power RF amplifier with a gain of 20 dB. It operates at frequencies ranging from 50 MHz to 4000 MHz and can handle a max input power of 23 dBm. This component, with its surface mount package, is commonly used in RF and microwave applications.
TQP369184
WIDE BAND LOW POWER; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 24 dBm; Minimum Operating Frequency: 0 MHz; Construction: COMPONENT; Gain: 19 dB;
Qorvo's TQP369184 is a wide band low power RF amplifier with 18.8 dB gain and 24 dBm max input power. Operating from -40 to 105°C, it covers frequencies from 0 to 6000 MHz, making it ideal for various RF and microwave applications.
TQP369180
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
TQP369182
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: NICKEL PALLADIUM GOLD;
TQP369185
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
TQP3M9038
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5; Minimum Operating Frequency: 50 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved