Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TQP3M9009 by Qorvo is a wide band medium power RF amplifier with 20 dB gain and 50 ohm impedance. It operates from 50 MHz to 4000 MHz, with a max input power of 23 dBm. This component is ideal for applications requiring high frequency amplification in RF and microwave systems.
Median Price
$7.700
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
RFMW
1+ parts
100+ parts
$4.540
1k+ parts
$3.060
10k+ parts
-
Nova Conductors
$2.785
Chip Stock
Cyclops Electronics Ltd
Martec Srl
Vyrian
Sensible Micro Corp
Cogito LLC
Speed Components Ltd
LWI Electronics Inc
Bristol Electronics
Component Sense
$3.647
Connect4Technologies Inc.
Sogenti Electronics
Advanced Electronics
$2.554
$2.324
$2.094
Corohmni
$2.705
Continental Prestige Electronics
$2.729
Argo Parts USA
Aztec Data Supply Inc.
$2.890
AZTECH Wire
$5.920
$5.690
$5.570
$5.460
RC Electronics
Kepictronics
S.R.D Solutions
Authorized Procurement Solutions
Netroflash
$2.646
$2.590
GreenTree Electronics
Futuretech Components
Formix International (Excess)
The plastic/epoxy material used in the package body makes this amplifier lightweight and durable, ideal for portable or rugged applications.
With a high maximum input power capacity of 23 dBm, this amplifier can handle strong input signals without distortion or damage.
Utilizing Gallium Arsenide (GaAs) technology, this amplifier offers high linearity and low noise performance for reliable signal amplification.
The 20 dB gain of this amplifier boosts the input signal strength significantly, making it suitable for applications requiring high signal amplification.
With a wide frequency range up to 4000 MHz, this amplifier is versatile and can be used in a variety of RF and microwave applications.
RF & Microwave Amplifiers TQP3M9009 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Qorvo
Additional Features:
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
TQP3M9009 RF & Microwave trade compliance attributes, and parameters.
ECCN
5A991.B
ECCN Governance
EAR
Your car. Your smartphone. Your wrist. Your heart. Even outer space. Qorvo products are at work connecting, protecting and powering the planet. We bring core radio frequency (RF) and power technologies and solutions to mobile, infrastructure, the IoT, defense/aerospace and power management markets. Transforming the way you live, work, play and communicate — that's what inspires us. Innovation. Product Leadership. Scale. Speed. At Qorvo, we are driven by the possibility of discovery — of new RF and power technologies and advancements in design, manufacturing and communications that make the world a better, cleaner and more connected place. We've been working on that for more than 30 years, both as innovators and as stewards of our planet. And we are just getting started.
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Electronic Devices
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
ADPA7006AEHZ
Analog Devices
ADPA7006AEHZ by Analog Devices is a RF & Microwave Amplifier with 20 dB gain, operating frequency range of 18-44 GHz. It has a max input power of 20 dBm and operates on a 5V power supply. Ideal for wide band medium power applications requiring high performance in surface mount configurations.
MMZ25332BT1
Freescale Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 12; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Supply Current: 412 mA;
HMC564LC4TR
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Input Power (CW): 5 dBm;
HMC414MS8GETR
NARROW BAND MEDIUM POWER; JESD-609 Code: e3; Maximum Operating Frequency: 2800 MHz; Maximum Input Power (CW): 17 dBm; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
NBB-310-T1
Qorvo
Qorvo's NBB-310-T1 is a ceramic RF amplifier with 20 dBm CW input power, 9 dB gain, and 50 ohm impedance. Ideal for wide band low power applications from 0 to 12000 MHz, it operates b/w -45°C to 85°C. Suitable for surface mount installations with a voltage supply of 5V.
ADPA7007AEHZ-R7
ADPA7007AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 18.5 dB gain, operating from 20-44 GHz. It features a max input power of 27 dBm and VSWR of 1.29, suitable for surface mount applications in RF & microwave systems requiring high performance amplification.
MSA-1105
Avantek
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 5.5;
RF5110GSR
Qorvo's RF5110GSR is a wideband medium power amplifier with 33dB gain, operating from 150MHz to 960MHz. It has a max input power of 13dBm and VSWR of 10, suitable for RF & microwave applications requiring high performance in a compact form factor. The hybrid construction and surface mount feature make it ideal for various communication systems.
HMC441LP3
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 6500 MHz;
ADL8106ACEZ-R7
WIDE BAND LOW POWER;
HMC465LP5E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
SGA-3363-TR1
Sirenza Microdevices
WIDE BAND LOW POWER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Input Power (CW): 5 dBm; Maximum Operating Frequency: 3600 MHz; Characteristic Impedance: 50 ohm; Gain: 15.5 dB;
MAX2232EEE+
Maxim Integrated
NARROW BAND MEDIUM POWER; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 1000 MHz; Minimum Operating Frequency: 800 MHz; Maximum Operating Temperature: 85 Cel;
NBB-400-D
Qorvo's NBB-400-D is a wide band low power RF amplifier with 15.5 dB gain, suitable for frequencies ranging from 0 to 8000 MHz. It can handle up to 20 dBm CW input power and has a VSWR of 1.9, making it ideal for various RF and microwave applications. Operating temperatures range from -45°C to 85°C, with a characteristic impedance of 50 ohms.
HMC636ST89ETR
Analog Devices' HMC636ST89ETR is a wide band low power RF amplifier with 5dB gain, operating from 200MHz to 4GHz. It has a max input power of 16dBm and operates on a 5V supply. Ideal for applications requiring surface mount construction in RF & microwave systems.
MAX2373ETC+T
NARROW BAND LOW POWER; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
MGA-81563-TR1G
Broadcom
Broadcom's MGA-81563-TR1G is a GAAS RF amplifier with 10.5 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 13 dBm and VSWR of 2, suitable for wideband low-power applications in temperatures ranging from -40°C to 85°C.
XP1050-QJ-0G0T
Mimix Broadband
WIDE BAND HIGH POWER; JESD-609 Code: e3; Maximum Input Power (CW): 25 dBm; Minimum Operating Temperature: -40 Cel; Terminal Finish: Matte Tin (Sn); Construction: COMPONENT;
TQP7M9106
Qorvo's TQP7M9106 is a wide band high power RF amplifier with 19 dB gain, operating from 50 MHz to 1500 MHz. It can handle up to 30 dBm CW input power and has a max VSWR of 10. Ideal for applications requiring high power amplification in RF & microwave systems.
HMC478ST89ETR
Analog Devices' HMC478ST89ETR is a wide band low power RF amplifier with 11 dB gain, operating from 0 to 4000 MHz. It has a max input power of 5 dBm and operates on a 5V supply with a current draw of 82 mA. Ideal for RF & microwave applications requiring high performance in plastic/epoxy package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TQP3M9028
Triquint Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Gain: 13 dB; Characteristic Impedance: 50 ohm;
The Qorvo TQP3M9028 is a wide band medium power RF amplifier with 13 dB gain and 50 ohm impedance. It operates from 50 MHz to 4000 MHz, with a max input power of 23 dBm. Suitable for surface mount applications in RF and microwave systems, it has a plastic/epoxy package body and requires a 5V power supply.
TQP3M9008
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Construction: COMPONENT;
TQP3M9008 by Qorvo is a wide band medium power RF amplifier with 19 dB gain and 50 ohm impedance. It operates from 50 MHz to 4000 MHz, with a max input power of 23 dBm. Ideal for RF applications requiring high performance in plastic/epoxy package.
TQP3M9009
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 150 mA;
TQP3M9037
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 22 dBm; Minimum Operating Temperature: -40 Cel;
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Characteristic Impedance: 50 ohm;
TQP3M9035
WIDE BAND MEDIUM POWER; Construction: COMPONENT; Maximum Input Power (CW): 23 dBm; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 50 MHz;
The Qorvo TQP3M9035 is a wide band medium power RF amplifier with 15 dB gain, suitable for frequencies ranging from 50 MHz to 6 GHz. It can handle up to 23 dBm of CW input power and operates in temperatures from -40°C to 85°C. Ideal for RF and microwave applications requiring high performance amplification.
TQP3M9018
The Qorvo TQP3M9018 is a wide band medium power RF amplifier with 19 dB gain and 50 ohm impedance. It operates from 50 MHz to 4000 MHz, handling up to 23 dBm CW input power. This component is ideal for applications requiring high frequency amplification in plastic/epoxy packages.
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Minimum Operating Frequency: 50 MHz; Minimum Operating Temperature: -40 Cel;
TQP3M9019
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 4000 MHz; No. of Functions: 1;
TQP3M9019 by Qorvo is a wide band medium power RF amplifier with a gain of 20 dB. It operates at frequencies ranging from 50 MHz to 4000 MHz and can handle a max input power of 23 dBm. This component, with its surface mount package, is commonly used in RF and microwave applications.
TQP369184
WIDE BAND LOW POWER; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 24 dBm; Minimum Operating Frequency: 0 MHz; Construction: COMPONENT; Gain: 19 dB;
Qorvo's TQP369184 is a wide band low power RF amplifier with 18.8 dB gain and 24 dBm max input power. Operating from -40 to 105°C, it covers frequencies from 0 to 6000 MHz, making it ideal for various RF and microwave applications.
TQP369185
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
TQP3M9038
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 5; Minimum Operating Frequency: 50 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved