Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX2691EWS+T by Analog Devices is a BICMOS RF amplifier with 13.1 dB gain, operating at 1.8/3.3V. It is a wide band low power device suitable for surface mount applications in RF & Microwave systems, offering a characteristic impedance of 50 ohm and temperature range from -40 to 85°C.
Median Price
$3.600
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
100+ parts
$2.706
1k+ parts
$2.372
10k+ parts
$2.257
DigiKey
$4.170
$3.141
$2.756
$2.623
Mouser Electronics
$2.900
$2.560
$2.500
Newark
$4.300
$3.230
$2.840
-
Verical
$1.781
Farnell
$2.350
$2.010
Element14
$3.590
$3.080
$2.930
Nova Conductors
$1.670
Digiode
$2.328
Cyclops Electronics Ltd
Vyrian
Anansix
Aztec Data Supply Inc.
$1.130
MARBEL Systems
$1.271
Texas Native Microelectronics
$1.461
$1.403
$1.359
$1.286
Aranea Global
$1.637
$1.571
Argo Parts USA
Kenton Components
$1.753
$1.543
Ampacity Inc.
$2.120
Semicontronic
$2.067
$2.056
Corphita
$2.205
Corohmni
$2.621
Qasali Group International
$3.945
$3.669
$3.471
Microchip USA
$10.480
$10.410
$10.380
$10.350
Continental Prestige Electronics
$1.480
$1.290
Plastic/Epoxy material provides durability and protection for the internal components of the amplifier, ensuring a long lifespan.
Offers flexibility in power supply options, making it suitable for a variety of applications with different voltage requirements.
Having 4 terminals allows for easy and secure connection to other components in the circuit, enhancing the overall reliability of the amplifier.
With a high maximum operating temperature, this amplifier can withstand extended periods of operation under various environmental conditions without overheating.
The low minimum operating temperature ensures reliable performance even in cold environments, making it suitable for use in a wide range of settings.
The combination of tin, silver, copper, and nickel terminal finishes provides excellent conductivity and corrosion resistance, ensuring stable and efficient signal transmission.
Utilizing BICMOS technology allows for high-speed operation and low power consumption, making this amplifier ideal for applications where efficiency is critical.
Being a wideband low power amplifier, it can effectively amplify signals across a broad frequency range while consuming minimal power, making it suitable for wireless communication systems.
Having a characteristic impedance of 50 ohms ensures optimal matching with other RF components, reducing signal loss and reflections for improved performance.
With a gain of 13.1 dB, this amplifier can boost the strength of incoming signals, improving the overall signal-to-noise ratio and enhancing communication quality.
The surface mounting feature simplifies the installation process and allows for compact integration into circuit boards, saving space and facilitating mass production.
RF & Microwave Amplifiers MAX2691EWS+T attributes and parameters. Explore more RF & Microwave Amplifiers devices from Analog Devices
Characteristic Impedance:
Construction:
Gain:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
Bytesonic Electronics
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Eic Semiconductor
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Dc Components
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Vishay Telefunken
GALI-51+
Mini-circuits
GALI-51+ by Mini-circuits is a wide band low power RF amplifier with 14 dB gain and 1.7 VSWR. It operates from 0 to 4000 MHz, suitable for various RF applications. With a compact plastic/epoxy package, it can handle up to 13 dBm input power and supports surface mounting.
HMC903LP3E
Analog Devices
Analog Devices' HMC903LP3E is a GAAS RF amplifier with 17.5 dB gain, operating from 6-17 GHz. It has a max input power of 10 dBm and draws 110 mA at 3.5 V. Ideal for wideband low-power applications, this component offers high performance in plastic/epoxy packaging for surface mount assembly.
MMZ09312BT1
NXP Semiconductors
The NXP Semiconductors MMZ09312BT1 is a wide band medium power RF amplifier with 29 dB gain, operating from 400 MHz to 1000 MHz. It has a max input power of 14 dBm and requires a 5V power supply with a max current draw of 83 mA. Ideal for applications requiring surface mount components in RF and microwave systems.
CMPA0060002F1
Wolfspeed
WIDE BAND HIGH POWER;
CHA3666-QAG
United Monolithic Semiconductor Sas
CHA3666-QAG by United Monolithic is a wide band low power RF amplifier with 19 dB gain. It operates b/w 5800-17000 MHz, handling up to 10 dBm CW input power. Ideal for RF applications, it can withstand temperatures from -40°C to 85°C.
CMPA601C025D
MGA-87563-BLKG
Broadcom
Broadcom's MGA-87563-BLKG is a GAAS RF amplifier with 50 ohm impedance, operating from 500 MHz to 4 GHz. It has a CW input power of 13 dBm and VSWR of 1.8, suitable for wideband low-power applications in temperatures ranging from -40°C to 85°C. The component features a surface-mount package with matte tin terminals, making it ideal for various RF and microwave systems.
MGA-86576-TR1G
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: METAL; Technology: GAAS; JESD-609 Code: e3;
760
Ms Kennedy
RF/Microwave Amplifiers; No. of Terminals: 8; Package Body Material: METAL; Technology: HYBRID; Screening Level: 38535Q/M;38534H;883B; Power Supplies (V): +-15;
GALI-6
The Mini-circuits GALI-6 is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handling up to 20 dBm CW input power. Ideal for surface mount applications in RF & microwave systems, it offers VSWR of 2 and operates b/w -45°C to +85°C.
HMC561LP3E
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC462LP5E
HMC462LP5E by Analog Devices is a wide band low power RF amplifier with 10 dB gain. It operates from 2-20 GHz, handling up to 18 dBm CW input power. This component, made of GaAs technology, is ideal for RF and microwave applications requiring surface mounting features.
GRF2071
Guerrilla Rf
GRF2071 by Guerrilla Rf is a PHEMT technology RF amplifier with 18 dB gain, operating from 700 MHz to 2700 MHz. It has a max input power of 23 dBm and VSWR of 2, suitable for wideband low-power applications in RF & microwave systems. The component is surface-mountable and operates b/w -40°C to 105°C.
MGA-61563-BLKG
Broadcom's MGA-61563-BLKG is a GAAS RF amplifier with 6.9dB gain, operating from 100MHz to 6GHz. It has a max input power of 18dBm and VSWR of 2, suitable for wideband low-power applications in RF & microwave systems. With a compact plastic/epoxy package and surface mounting feature, it offers high performance with 48mA supply current at 3/5V.
HELA-10+
HELA-10+ by Mini-circuits is a wideband medium power RF amplifier with 9.5 dB gain, operating from 50 MHz to 1000 MHz. It has a max input power of 20 dBm and VSWR of 1.22, suitable for applications requiring high-frequency amplification in RF & microwave systems.
RF5110GTR7
Qorvo
Qorvo's RF5110GTR7 is a wide band medium power amplifier with 33 dB gain, operating from 150 MHz to 960 MHz. It has a max input power of 13 dBm and VSWR of 10, suitable for RF & microwave applications. With a construction of hybrid technology and surface mounting feature, it operates at temperatures ranging from -40°C to 85°C.
HMC455LP3
NARROW BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 1700 MHz;
MGA-23003-BLKG
Broadcom's MGA-23003-BLKG is a RF & Microwave Amplifier with 32 dB Gain, operating b/w 3300-3800 MHz. It has a Max Input Power of 15 dBm and operates on a 3.3V power supply. Ideal for narrowband medium power applications due to its GaAs technology and surface mounting feature.
RF3827TR7
Qorvo's RF3827TR7 is a GAAS wide band medium power amplifier with 20.5 dB gain, operating from 5 MHz to 1500 MHz. It has a max input power of 13 dBm and VSWR of 20, suitable for surface mount applications in RF & microwave systems requiring up to 8V supply voltage.
QPA9426TR13
Qorvo's QPA9426TR13 is a narrow band high power RF amplifier with 30.5 dB gain, operating from 2500 MHz to 2700 MHz. It has a max input power of 10 dBm and VSWR of 10, suitable for applications requiring high power amplification in the RF & Microwave domain. The component is designed for surface mount installation and operates within a temperature range of -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
MAX2659ELT+T
Analog Devices' MAX2659ELT+T is a BICMOS RF amplifier with 1.8/3V supplies, 6 terminals, and 5.6mA max supply current. It operates b/w -40°C to 85°C, features gold nickel terminal finish, and is ideal for surface mount applications in RF & microwave circuits.
Maxim Integrated
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Minimum Operating Temperature: -40 Cel;
MAX2640EUT+T
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: MATTE TIN;
MAX2640EUT-T
MAX2640EUT-T by Maxim Integrated is a wide band low power RF amplifier with gain of 12.8 dB, operating from 300 MHz to 1500 MHz. It has a max input power of 5 dBm and operates on 3/5 V supplies. Ideal for RF & microwave applications requiring surface mount construction and characteristic impedance of 50 ohm.
Analog Devices' MAX2640EUT+T is a wideband low power RF amplifier with 12.8 dB gain, operating from 300 MHz to 1500 MHz. It has a max input power of 5 dBm and operates on 3/5 V supplies. Ideal for applications requiring surface mount construction in RF & microwave systems.
MAX2232EEE
NARROW BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3/5; Construction: COMPONENT;
MAX2232EEE+
Analog Devices' MAX2232EEE+ is a RF amplifier with 23.9 dB gain, operating b/w 800-1000 MHz. It has a max input power of 10 dBm and VSWR of 1.5, ideal for narrowband medium power applications in temperatures ranging from -40 to 85°C.
NARROW BAND MEDIUM POWER; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 1000 MHz; Minimum Operating Frequency: 800 MHz; Maximum Operating Temperature: 85 Cel;
MAX2691EWS+T
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; No. of Functions: 1;
MAX2640AUT+T
MAX2640AUT+T by Analog Devices is a wide band low power RF amplifier with 12.8 dB gain, operating from 300 MHz to 1500 MHz. It has a max input power of 5 dBm, operates on 3/5 V supplies, and draws a max current of 7.8 mA. This component is ideal for RF and microwave applications requiring surface mounting in temperatures ranging from -40°C to 125°C.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
MAX2659ELT/V+T
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Screening Level: AEC-Q100;
MAX2659ELT/V+
NARROW BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Screening Level: AEC-Q100;
MAX2244EBL-T
NARROW BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 9; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
MAX2611EUS+T
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Maximum Voltage Standing Wave Ratio: 1.6; Minimum Operating Temperature: -40 Cel;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Additional Features: LOW NOISE; JESD-609 Code: e3;
MAX2611EUS-T
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 1100 MHz; Power Supplies (V): 3.8;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved