Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMA3117 by Onsemi is a RF & Microwave Amplifier with 6 terminals and a max supply current of 28mA. It operates b/w -40 °C to 85°C, suitable for various applications requiring a power supply of 5V. The package body material is made of PLASTIC/EPOXY, featuring surface mounting feature.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
TANS Electronics
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
UHIMA Technologies
Corohmni
Corphita
This material is lightweight and durable, making the amplifier easy to handle and resistant to damage.
Operating at a lower voltage helps in reducing power consumption and increasing efficiency.
Having more terminals allows for better connectivity options and flexibility in the setup of the amplifier.
With a high maximum operating temperature, this amplifier can handle intense usage without overheating or malfunctioning.
The wide operating temperature range ensures that the amplifier can function in various environmental conditions.
The low supply current requirement helps in efficient power usage and prevents overheating.
Surface mount installation makes it easy to integrate this amplifier into existing circuits or setups with minimal effort.
RF & Microwave Amplifiers SMA3117 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Onsemi
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Sub-Category:
Maximum Supply Current:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Daco Semiconductor
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Gec Plessey Semiconductors
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
HMC383LC4TR
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 5;
HMC478MP86E
Analog Devices
Analog Devices' HMC478MP86E is a wide band low power RF amplifier with 11 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handles up to 5 dBm input power, and has a compact surface mount package ideal for RF applications in temperatures ranging from -40 to 85°C.
AH202-F
Triquint Semiconductor
AH202-F by Triquint Semiconductor is a wide band medium power RF amplifier with 14 dB gain. It operates b/w 30 MHz to 2200 MHz, handling up to 16 dBm CW input power. This component, housed in a plastic/epoxy package, is ideal for applications requiring high frequency amplification in RF and microwave systems.
HMC565LC5
Analog Devices' HMC565LC5 is a wide band low power RF amplifier with 16 dB gain and 50 ohm impedance. Operating from 6-20 GHz, it handles up to 10 dBm CW input power. Ideal for applications requiring high frequency amplification in compact designs.
BGA616H6327XTSA1
Infineon Technologies
Infineon's BGA616H6327XTSA1 is a wide band low power RF amplifier with 18dB gain and 10dBm CW input power. Operating from -65°C to 150°C, it covers frequencies from 0MHz to 2700MHz. Ideal for applications requiring high performance in RF & microwave amplification.
MAX2640AUT+T
MAX2640AUT+T by Analog Devices is a wide band low power RF amplifier with 12.8 dB gain, operating from 300 MHz to 1500 MHz. It has a max input power of 5 dBm, operates on 3/5 V supplies, and draws a max current of 7.8 mA. This component is ideal for RF and microwave applications requiring surface mounting in temperatures ranging from -40°C to 125°C.
HMC372LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
AD8350ARZ20-REEL7
AD8350ARZ20-REEL7 by Analog Devices is a wide band medium power RF amplifier with 19 dB gain and 1000 MHz max operating frequency. It can handle up to 8 dBm CW input power, making it suitable for various RF and microwave applications requiring high performance in temperatures ranging from -40°C to 85°C.
ADA-4643-BLKG
Agilent Technologies
WIDE BAND LOW POWER; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1; Power Supplies (V): 3.5; Terminal Finish: Tin (Sn);
SGA-3363
Sirenza Microdevices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1;
HMC505LP4
NARROW BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; JESD-609 Code: e0;
MMG20241HT1
NXP Semiconductors
The NXP Semiconductors MMG20241HT1 is a GAAS RF amplifier with 18.4 dB gain, operating from 450 MHz to 3800 MHz. It has a max input power of 23 dBm and requires a 5V power supply, making it ideal for wideband medium-power applications in RF and microwave systems. The component is surface-mountable with matte tin terminals and a characteristic impedance of 50 ohms.
BGU6005/N2X
BGU6005/N2X by NXP Semiconductors is a narrow band low power RF amplifier with 17.5 dB gain and 50 ohm impedance. It operates b/w 1559-1610 MHz, handles up to 10 dBm input power, and has a max VSWR of 1.43. This component is ideal for applications requiring surface mounting in RF & microwave systems.
SP9711
Spectrum Control
WIDE BAND LOW POWER; Maximum Voltage Standing Wave Ratio: 2; Minimum Operating Frequency: 1000 MHz; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 85 Cel;
HMC392ALC4
HMC392ALC4 by Analog Devices is a RF & Microwave Amplifier with 20 dBm CW input power, 14.5 dB gain, and 3500-8000 MHz frequency range. It operates at temperatures from -40 to 85°C and requires a 5V power supply. Ideal for wideband low-power applications due to its GaAs technology and surface mounting feature.
HMC342LC4TR
HMC342LC4TR by Analog Devices is a wide band low power RF amplifier with 1 function and 24 terminals. It operates at temperatures ranging from -40 to 85°C and requires a power supply of 3V. This ceramic package surface mount device is suitable for RF and microwave applications.
HMC963LC4
Analog Devices' HMC963LC4 is a wide band low power RF amplifier with 16.5 dB gain, operating from 6-26.5 GHz. It can handle up to 0 dBm CW input power, ideal for RF & microwave applications requiring high frequency amplification in temperatures ranging from -40°C to 85°C.
XP1039-QJ-0G0T
M/a-com Technology Solutions
XP1039-QJ-0G0T by M/a-com Technology Solutions is a wide band high power RF amplifier with 15.5 dB gain, operating from 5600 MHz to 7100 MHz. It can handle up to 25 dBm CW input power and operates in temperatures ranging from -40°C to 85°C. Ideal for applications requiring high power amplification in RF and microwave systems.
A64
WIDE BAND LOW POWER; No. of Terminals: 4; Package Body Material: METAL; Package Equivalence Code: CAN4,.3; Power Supplies (V): 15; Minimum Operating Frequency: 10 MHz;
ZX60-2411BM-S+
Mini-circuits
Mini-circuits' ZX60-2411BM-S+ is a COAXIAL RF amplifier with 9 dB Gain, operating from 1900 MHz to 2400 MHz. It has a Max Input Power of 16 dBm and VSWR of 1.65, making it ideal for NARROW BAND LOW POWER applications in RF & Microwave systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMA3107-TL-E
Sanyo Semiconductor
WIDE BAND LOW POWER;
WIDE BAND LOW POWER; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6;
SMA3103-TL-E
SMA3102-TL-H
WIDE BAND LOW POWER; JESD-609 Code: e6; Terminal Finish: Tin/Bismuth (Sn/Bi);
SMA3109
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
SMA3109-TL-E
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
SMA3101
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TSSOP6,.08;
SMA3103
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TSSOP6,.08; No. of Functions: 1;
SMA3101-TL-E
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Gain: 21.5 dB;
SMA3107
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
SMA3102TL
WIDE BAND LOW POWER; Gain: 21.5 dB; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
SMA3109TL
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Construction: COMPONENT;
SMA3006
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 0 dBm; Gain: 14 dB;
SMA3004
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 2500 MHz; Maximum Supply Current: 8 mA;
SMA3001
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3; Package Equivalence Code: TSSOP6,.08;
SMA3005
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 0 dBm; Maximum Supply Current: 8 mA;
SMA3102
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Gain: 21.5 dB; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel;
SMA3107TL
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Gain: 21 dB; Characteristic Impedance: 50 ohm;
SMA3117TL
Sanyo Electric
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Power Supplies (V): 5;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved