Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMA3109-TL-E by Onsemi is a RF & Microwave Amplifier with 6 terminals, operating from -40 to 85°C. It has a supply voltage of 3V and max current of 20.5mA. Ideal for surface mount applications in various electronic devices requiring amplification in the RF & microwave range.
Median Price
$0.162
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.129
Verical
Chip1Stop
$0.136
Farnell
$0.258
$0.176
$0.169
Element14
$0.408
$0.271
$0.225
Rochester
$0.187
$0.155
$0.138
Vyrian
Digiode
$0.145
Flip Electronics
Chip Stock
Bristol Electronics
Corohmni
Corphita
Advanced Electronics
$3.507
$3.191
$2.876
Perfect Parts
Infinite Electronics LLP (Excess)
Lixinc
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
TANS Electronics
Continental Prestige Electronics
$0.192
$0.125
Kulean Microsystems
Problanco Electronics
UHIMA Technologies
SupplyDigital Components
PLASTIC/EPOXY material provides good thermal stability and mechanical strength, making the amplifier durable and reliable in various operating conditions.
Operating at a low power supply of 3V allows for energy efficiency and lower power consumption, ideal for applications where power efficiency is important.
Having 6 terminals provides more connection options and flexibility in circuit design, making the amplifier versatile for various applications.
With a maximum operating temperature of 85 °C, the amplifier can perform reliably in high-temperature environments without the risk of overheating.
The wide range of minimum operating temperature (-40 °C) ensures that the amplifier can function effectively even in extreme cold conditions, making it suitable for diverse applications.
Tin/Bismuth terminal finish offers good solderability and corrosion resistance, ensuring stable connections and overall longevity of the amplifier.
Operating at a maximum supply current of 20.5 mA ensures efficient power consumption and prevents overloading, enhancing the amplifier's performance and longevity.
The surface mounting feature simplifies installation and integration into circuit boards, saving space and making it easier to incorporate the amplifier into compact designs.
RF & Microwave Amplifiers SMA3109-TL-E attributes and parameters. Explore more RF & Microwave Amplifiers devices from Onsemi
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Sub-Category:
Maximum Supply Current:
Terminal Finish:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Lite-on Semiconductor
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
Philips Components
HMC451LP3E
Hittite Microwave
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 5000 MHz;
NBB-400-D
Rf Micro Devices
WIDE BAND LOW POWER; Minimum Operating Temperature: -45 Cel; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Maximum Voltage Standing Wave Ratio: 1.9;
XP1035-QH-0G00
XP1035-QH-0G00 by M/a-com is a GAAS technology RF amplifier with 26 dB gain, operating from 5900 MHz to 9500 MHz. It has a max input power of 15 dBm and operates on a 6V power supply. Ideal for wideband medium-power applications, it features surface mounting and can withstand temperatures from -55°C to 85°C.
HMC478MP86
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SL,4GW-LD,.085CIR;
MAX2659ELT/V+T
Analog Devices
MAX2659ELT/V+T by Analog Devices is a RF amplifier with 1.8/3.3V power supplies, BICMOS technology, and 5.6mA max supply current. It operates b/w -40 to 85°C, has AEC-Q100 screening level, and comes in a plastic/epoxy package. Ideal for RF & microwave applications requiring surface mounting feature.
HMC794LP3ETR
WIDE BAND LOW POWER;
MW7IC930NR1
Freescale Semiconductor
NARROW BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: MOS; Minimum Operating Frequency: 920 MHz; Package Equivalence Code: FLNG,.67"H.SPACE; JESD-609 Code: e3;
ADL5611ARKZ-R7
ADL5611ARKZ-R7 by Analog Devices is a wide band low power RF amplifier with 14.3 dB gain, operating from 30 MHz to 6 GHz. It has a max input power of 20 dBm and operates on a 5V supply, making it suitable for various RF and microwave applications. The component is constructed using plastic/epoxy material and features surface mounting for easy installation in electronic systems.
MMG3014NT1
NXP Semiconductors
MMG3014NT1 by NXP Semiconductors is a RF & Microwave Amplifier with 15 dBm CW input power, 18.5 dB gain, and 50 ohm impedance. It operates from 40 MHz to 4000 MHz, suitable for wide band medium power applications. This component has a plastic/epoxy package body material and requires a 5V power supply with max current of 160 mA.
SST13LP05-MLCF
SST13LP05-MLCF by Microchip Technology is a wide band medium power RF amplifier with 28 dB gain. It operates b/w 2400-2500 MHz, ideal for wireless communication applications. The component has 16 terminals, matte tin finish, and can handle temperatures from -40 to 85°C.
HMC794LP3E
HMC794LP3E by Analog Devices is a wide band low power RF amplifier with a max operating frequency of 2 GHz and characteristic impedance of 50 ohm. It can handle up to 13 dBm CW input power, making it suitable for various RF and microwave applications requiring high performance in temperature range from -40°C to 85°C.
MD7IC2012GNR1,528
NARROW BAND HIGH POWER;
TQP3M9037
Triquint Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Characteristic Impedance: 50 ohm;
HMC429LP4E
Analog Devices' HMC429LP4E is a RF & Microwave Amplifier with VSWR of 2, operating from -40°C to 85°C. It's a narrow band low power device with 50 ohm impedance, covering frequencies from 4450 MHz to 5000 MHz. Ideal for applications requiring precise amplification in RF and microwave systems.
MGA-53543-BLKG
Broadcom
Broadcom's MGA-53543-BLKG is a wide band low power RF amplifier with 14 dB gain. Operating from 50 MHz to 6 GHz, it handles up to 13 dBm CW input power and has a VSWR of 2. Ideal for RF applications requiring a compact component with a characteristic impedance of 50 ohms.
RDA1005LTR7
Qorvo
Qorvo's RDA1005LTR7 is a wide band low power RF amplifier with 15.5 dB gain, operating from 50 MHz to 4000 MHz. It has a max input power of 20 dBm and operates on a 5V power supply. Ideal for applications requiring surface mount components in RF & microwave systems.
HMC561LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC564LC4
Analog Devices' HMC564LC4 is a wideband low power RF amplifier with 14dB gain, operating from 7-14GHz. It has a max input power of 20dBm and operates on a 3V supply, drawing 75mA. This ceramic-packaged component is ideal for high-frequency applications requiring surface mount installation.
HMC7950LS6
Analog Devices' HMC7950LS6 is a wide band low power RF amplifier with 13 dB gain, operating from 2-28 GHz. It can handle up to 20 dBm CW input power and operates b/w -40°C to +85°C. Ideal for RF & microwave applications requiring high frequency amplification in a compact form factor.
HMC797LP5E
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -55 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMA3107-TL-E
Sanyo Semiconductor
Onsemi
WIDE BAND LOW POWER; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6;
SMA3103-TL-E
SMA3102-TL-H
WIDE BAND LOW POWER; JESD-609 Code: e6; Terminal Finish: Tin/Bismuth (Sn/Bi);
SMA3109
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
SMA3101
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TSSOP6,.08;
SMA3103
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: TSSOP6,.08; No. of Functions: 1;
SMA3117
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 28 mA; Maximum Operating Temperature: 85 Cel;
SMA3101-TL-E
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Gain: 21.5 dB;
SMA3107
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
SMA3102TL
WIDE BAND LOW POWER; Gain: 21.5 dB; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
SMA3109TL
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Characteristic Impedance: 50 ohm; Construction: COMPONENT;
SMA3006
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 0 dBm; Gain: 14 dB;
SMA3004
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Frequency: 2500 MHz; Maximum Supply Current: 8 mA;
SMA3001
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3; Package Equivalence Code: TSSOP6,.08;
SMA3005
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Input Power (CW): 0 dBm; Maximum Supply Current: 8 mA;
SMA3102
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Gain: 21.5 dB; Construction: COMPONENT; Minimum Operating Temperature: -40 Cel;
SMA3107TL
WIDE BAND LOW POWER; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Gain: 21 dB; Characteristic Impedance: 50 ohm;
SMA3109-TL
Sanyo Electric
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: FL6,.06,25; Maximum Supply Current: 20.5 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved