Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NSVMMBT5401WT1G by Onsemi is a PNP BJT with hFE of 50, VCE of 150V, and IC of 0.5A. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and fT of 100MHz.
Median Price
$0.080
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Rochester
1+ parts
$0.060
100+ parts
1k+ parts
10k+ parts
-
Arrow
$0.299
$0.115
$0.074
$0.053
Mouser Electronics
$0.300
$0.075
$0.052
DigiKey
Avnet
$0.033
Future Electronics
$0.048
Verical
$0.058
$0.050
Element14
$0.101
$0.061
Chip1Stop
Digiode
$0.028
Nova Conductors
IBS Electronics
NAC Semi
$0.098
Chip Stock
Vyrian
Ampacity Inc.
$0.025
Corphita
$0.027
Corohmni
$0.030
Semicontronic
$0.056
$0.055
$0.054
Bastille Electronics
$0.071
$0.068
$0.067
Argo Parts USA
$0.073
Continental Prestige Electronics
$0.378
$0.146
$0.065
$0.041
Advanced Electronics
$0.596
$0.567
Aztec Data Supply Inc.
$0.994
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
Authorized Procurement Solutions
TANS Electronics
UHIMA Technologies
This material provides durability and protection to the transistor, ensuring long-term reliability.
PNP transistors are commonly used in amplification and switching applications, offering versatility in circuit design.
The single configuration simplifies circuit design and makes the transistor easier to integrate into existing systems.
Surface mount capability allows for easy and secure mounting on PCBs, saving space and reducing assembly time.
Rectangular shape facilitates efficient placement and orientation of the transistor on the PCB.
Gull wing terminals provide strong mechanical attachment and enhanced thermal performance during operation.
Three terminals allow for easy connections in the circuit and provide versatility in circuit design.
Small outline package style saves space on the PCB and enables compact and efficient circuit designs.
High DC current gain ensures efficient amplification and control of current flow in the circuit.
High collector-emitter voltage rating provides flexibility and safety margin in various circuit applications.
Silicon material offers high performance, low power consumption, and reliability in transistor operation.
The maximum collector current rating allows the transistor to handle moderate current levels in the circuit.
Matte tin finish provides good solderability and reliability in the terminal connections during assembly.
Dual terminal position allows for flexible mounting and connection options in the circuit layout.
Short reflow time ensures quick and efficient soldering process during PCB assembly.
High peak reflow temperature capability enables reliable soldering and thermal performance in operation.
Compliance with AEC-Q101 standard ensures high reliability and quality for automotive applications.
High transition frequency allows for fast switching speeds and high-frequency operation in various circuit applications.
Small Signal Bipolar Junction Transistors (BJT) NSVMMBT5401WT1G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
Nominal Transition Frequency (fT):
NSVMMBT5401WT1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Changes 09/Sep/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BC846BW,115
Nexperia
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
2N3906
Jiangsu Changjiang Electronics Technology
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; Transistor Element Material: SILICON;
2N2222AUA
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .8 A; Maximum Turn Off Time (toff): 300 ns; Transistor Element Material: SILICON;
BC847C
Promax-johnton
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .1 A; No. of Elements: 1; JESD-609 Code: e0;
2N3904TFR
2N3904TFR by Onsemi is a NPN BJT transistor with max. power dissipation of 0.35W, hFE of 30, and fT of 300MHz. Ideal for switching applications due to its max. collector-emitter voltage of 40V and max. collector current of 0.2A. Operates in temp range -55 to 150°C, with turn on time of 70ns and turn off time of 250ns.
BC817-40
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .8 A;
Samsung
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .8 A; Terminal Position: DUAL;
BC847CLT1G
BC847CLT1G by Onsemi is a NPN BJT transistor with VCEsat of 0.6V, hFE of 420, and fT of 100MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package.
JANTX2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Transistor Application: SWITCHING; Package Style (Meter): CYLINDRICAL;
MMBT3906
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; No. of Terminals: 3;
BC547-B
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified;
MMBT2222A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .6 A;
JANTX2N2222AUA
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Terminal Form: NO LEAD;
2N3904
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .2 A;
BC547CTA
BC547CTA by Onsemi is a NPN BJT transistor with hFE of 420, IC of 0.1A, and VCE of 45V. Ideal for switching applications due to its high transition frequency of 300MHz and max power dissipation of 0.625W in a cylindrical package. Suitable for various electronic circuits requiring low-power amplification or signal processing.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; Transistor Element Material: SILICON;
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
2N2219A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .8 W; Maximum Collector Current (IC): .8 A;
MMBT3904TT1G
MMBT3904TT1G by Onsemi is a NPN BJT transistor with 3 terminals, hFE of 30, and max. power dissipation of 0.15W. Ideal for amplifier applications, it has a max. collector-emitter voltage of 40V and operates up to 150°C. With a transition frequency of 300MHz, it offers fast turn-on/off times for efficient performance in small outline packages.
BC847B
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NSVMMBT2222ATT1G
Small Signal Bipolar Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
NSVMMBT2907AWT1G
NSVMMBT2907AWT1G by Onsemi is a PNP BJT transistor with 60V VCEO, 0.6A IC, and 200MHz fT. Ideal for amplifier applications due to its small outline package style and high transition frequency. Features Gull Wing terminals and operates up to 150°C, meeting AEC-Q101 standard.
NSVMMBT2907AM3T5G
NSVMMBT2907AM3T5G by Onsemi is a PNP BJT transistor with VCEsat of 1.6V, hFE of 50, and IC of 0.6A. Ideal for amplifier applications, it has a max operating temp of 150°C and fT of 200MHz. Suitable for surface mount with a package style of small outline.
NSVMMBT3906TT1G
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; Maximum Turn Off Time (toff): 300 ns;
NSVMMBT2222AM3T5G
NSVMMBT2222AM3T5G by Onsemi is a NPN BJT transistor with max VCEsat of 1V, hFE of 75, and IC of 0.6A. Ideal for amplifier applications due to its small outline package style and high transition frequency of 300MHz. Suitable for surface mount designs with operating temperatures ranging from -55°C to 150°C.
NSVMMUN2232LT1G
NSVMMUN2232LT1G by Onsemi is a NPN BJT with max power dissipation of 0.4W, min hFE of 15, and max IC of 0.1A. Ideal for surface mount applications in small signal circuits due to its silicon element material and matte tin terminal finish.
NSVMMBT5401LT3G
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; No. of Elements: 1;
NSVMMBT5550LT1G
NSVMMBT5550LT1G by Onsemi is a NPN BJT transistor with VCEsat of 0.25V, hFE of 20, and IC of 0.6A. It is used in automotive applications due to AEC-Q101 standard compliance and can operate b/w -55 to 150°C.
NSVMMUN2235LT1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Terminal Position: DUAL; Maximum Collector-Emitter Voltage: 50 V;
NSVMMBTA05LT1G
Small Signal Bipolar Transistors; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
NSVMMBT5551M3T5G
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .06 A; Maximum Collector-Emitter Voltage: 160 V; Transistor Element Material: SILICON;
NSVMMBT6429LT1G
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .2 A;
NSVMMUN2112LT1G
NSVMMUN2112LT1G by Onsemi is a PNP BJT transistor with max power dissipation of 0.4W, min hFE of 60, and max IC of 0.1A. Ideal for surface mount applications in electronics requiring low current amplification and switching capabilities.
NSVMMBT5087LT1G
Small Signal Bipolar Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
NSVMMBT6520LT1G
NSVMMBT6520LT1G by Onsemi is a PNP BJT with 350V VCEO, 0.5A IC, and 40MHz fT. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and 150°C max operating temp.
NSVMMBT4401WT1G
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .6 A;
NSVMMUN2232LT3G
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .4 W; Maximum Collector Current (IC): .1 A; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
NSVMMBT589LT1G
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .71 W; Maximum Collector Current (IC): 1 A;
NSVMMBT5087LT3G
Small Signal Bipolar Transistors; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved