Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV5232VH-MPB-H by Onsemi is a BICMOS LED display driver with 28 terminals, operating at -25 to 70 °C. It has a supply voltage of 5V and is surface mountable. Ideal for graphics displays, it offers high performance in various applications.
Median Price
$3.925
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$3.140
1k+ parts
$2.810
10k+ parts
$2.650
DigiKey
$4.140
Verical
$3.513
$3.313
Digiode
$3.325
Chip Stock
Vyrian
Corphita
$3.150
Corohmni
$3.500
Component Stockers USA
$3.570
$3.360
$3.030
AZTECH Wire
$11.290
QUARKTWIN TECHNOLOGY LTD
Microchip USA
TANS Electronics
Authorized Procurement Solutions
Kulean Microsystems
Continental Prestige Electronics
$3.320
Problanco Electronics
SupplyDigital Components
UHIMA Technologies
The use of plastic/epoxy for the package body material provides a lightweight and durable solution for the display driver.
Being surface mountable allows for easy and efficient installation on circuit boards, saving space and enabling automated assembly processes.
Operating at 5 volts makes this display driver compatible with a wide range of systems and power sources.
Having 28 terminals allows for more flexibility in connecting the display driver to other components in the system.
The capability to operate at temperatures up to 70 °C ensures reliability and stability in various environmental conditions.
With a minimum operating temperature of -25 °C, this display driver can function effectively even in cold environments.
The tin/bismuth terminal finish provides excellent solderability and reliability for secure connections.
Utilizing BICMOS technology offers a combination of the advantages of both bipolar and CMOS technologies, leading to improved performance and efficiency.
Having a nominal supply voltage of 5 volts ensures compatibility with standard power sources and simplifies integration into existing systems.
With an MSL level of 3, this display driver can withstand moderate exposure to moisture during storage and operation.
The LED display driver interface IC type ensures seamless communication and control of LED displays, making it ideal for various display applications.
Graphics Display Drivers LV5232VH-MPB-H attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
LV5232VH-MPB-H Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 24/Jul/2015
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Rochester Electronics
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Semiconductor
DS18B20Z
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
Lite-on Semiconductor
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
ICM7218BIPI
General Electric Solid State
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
TPS92612DBVR
Texas Instruments
TPS92612DBVR by Texas Instruments is a graphics display driver with 5 terminals, operating b/w -40 to 125°C. It supports constant-current output and has a max supply voltage of 40V. Ideal for automotive applications due to its small outline package style and nickel palladium gold terminal finish.
TLC5927IPWPR
TLC5927IPWPR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage of 3-5.5V, and constant-current output for LED displays. It features a serial data input mode, small outline package style, and dual terminal position. Ideal for automotive applications due to its wide temperature range (-40 to 125°C) and moisture sensitivity level of 2.
MAX20090ATP/VY+T
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Screening Level: AEC-Q100; Peak Reflow Temperature (C): 260;
LT3518IUF#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
LP5030RJVR
LP5030RJVR by Texas Instruments is a SERIAL graphics display driver with 30 channels and segments. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 2.7V to 5.5V, it offers a max frequency of 0.4 MHz for LED displays.
MIC2293-15YML-TR
Microchip Technology
MIC2293-15YML-TR by Microchip is a LED display driver with 8 terminals, operating from -40 to 125 °C. It has a supply voltage range of 2.5V to 10V and is suitable for automotive applications due to its nickel palladium gold finish and compact square package design.
MAX16834AUP+T
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
HVLED807PF
HVLED807PF by STMicroelectronics is a LED display driver with 16 terminals, operating at 14V. It features a small outline package shape, Gull Wing terminal form, and Nickel/Palladium/Gold finish. Ideal for graphics displays requiring a supply voltage of 14V and surface mount installation.
PTPS92520QDADRQ1
PTPS92520QDADRQ1 by Texas Instruments is a graphics display driver with 32 terminals and operates in automotive applications. It features a serial data input mode, supports a max supply voltage of 5.3V, and has an operating temperature range from -40 to 125°C.
TLE4242GATMA3
Infineon Technologies
TLE4242GATMA3 by Infineon Technologies is a LED display driver with a max supply voltage of 42V and min supply voltage of 4.5V. This small outline package IC has 7 terminals, gull wing terminal form, and is suitable for graphics display applications.
CAT4016Y-T2
CAT4016Y-T2 by Onsemi is a graphics display driver with 16 segments. It operates at 3-5.5V, -40 to 85°C, and has a max fmax of 25MHz. Ideal for LED displays, it features a small outline package with dual terminals and matte tin finish.
LP5569RTWR
LP5569RTWR by Texas Instruments is a 24-terminal LED display driver with 9 channels and segments. It operates b/w -40 to 85 °C, with a supply voltage range of 2.5V to 5.5V. Ideal for industrial applications requiring serial data input mode and surface mount compatibility in compact spaces.
PCF8577CT/3,118
NXP Semiconductors
PCF8577CT/3,118 by NXP Semiconductors is a graphics display driver with dot matrix display mode and serial data input. It operates b/w -40 to 85 °C with a supply voltage range of 2.5-6 V, suitable for industrial applications requiring multiplexed display capability.
HV5523K7-G
HV5523K7-G by Microchip Technology is a graphics display driver with SERIAL data input mode. It operates b/w -40 to 85 °C and has a max supply voltage of 5.5 V. Ideal for industrial applications, it features 32 segments, true output polarity, and a terminal pitch of 0.5 mm.
MC14489BPE
MC14489BPE by NXP Semiconductors is a 5V LED display driver with 8 segments and 5-digit capability. It operates in serial data input mode, suitable for graphics displays requiring multiplexed capabilities. The rectangular package has 20 terminals, making it ideal for applications needing high-quality segment display control.
LM3555TLE/NOPB
LM3555TLE/NOPB by Texas Instruments is a graphics display driver with 12 terminals, operating voltage range of 2.5V to 3.6V, and max supply voltage of 5.5V. It features a serial data input mode and is suitable for LED display driver applications due to its thin profile package style and standard input characteristics.
STP16CP05MTR
STP16CP05MTR by STMicroelectronics is a graphics display driver with 16 segments, serial data input mode, and 30 MHz min fmax. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage range of 3-5.5 V. This small outline package features a Gull Wing terminal form and is suitable for LED display driving in various devices.
TPS61160DRVTG4
TPS61160DRVTG4 by Texas Instruments is a LED display driver with 6 terminals, operating voltage range of 2.7V to 18V, and low supply current of 1.8mA. Ideal for graphics displays, it has a small outline package style and industrial temperature grade suitability.
ZXLD1371EST16TC
Diodes Incorporated
ZXLD1371EST16TC by Diodes Inc. is a graphics display driver with a max supply voltage of 60V and power supplies of 12V. It is used as an LED display driver in automotive applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV5236VZ-TLM-H
LV5236VZ-TLM-H by Onsemi is a graphics display driver with 44 terminals and a supply voltage range of 4.5V to 5.5V. It operates in temperatures from -25°C to 75°C, suitable for LED display driver applications. This small outline package IC has a BICMOS technology, serial data input mode, and Gull Wing terminal form for efficient performance.
LV52204MUTBG
LV52204MUTBG by Onsemi is a Graphics Display Driver with 6 terminals, operating voltage range of 2.7V to 5.5V, and BICMOS technology. It is ideal for LED display driver applications due to its small outline package style and matte tin terminal finish, offering high performance in a compact design.
LV5207LP-E
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: QCCN; Package Shape: SQUARE;
LV5217GP-E
Display Drivers; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
LV52207NXB-VH
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: SQUARE;
LV52205MUTBG
Sanyo Semiconductor
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: SON; Package Shape: RECTANGULAR;
LV5217GP
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
LV5212VH-TLM-H
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e6; Terminal Finish: TIN BISMUTH;
LV5217GP-TE-L-E
LV5213LP
LV5219LG-MPB-E
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 49; Package Code: VFLGA; Package Shape: SQUARE;
LV5213LP-E
LV5216CS-TE-L-E
Display Drivers; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 36; Package Code: FBGA; Package Shape: SQUARE;
LV5212VH-MPB-H
LV5207LP
LV5213LP-TE-L-E
LV5207LP-TE-L-E
LV5207LP-TE-L-E by Onsemi is a Graphics Display Driver with 24 terminals, BICMOS technology, and LED display driver interface. Operating voltage range of 3V to 4.5V makes it suitable for various applications requiring low power consumption and high performance in compact spaces. Ideal for driving LED segments in electronic displays due to its small form factor and surface-mount capability.
LV5215LF
Display Drivers; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: QCCN; Package Shape: SQUARE;
LV5215LF-TE-L-E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved