Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
Median Price
$0.927
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Element14
1+ parts
100+ parts
$0.605
1k+ parts
$0.515
10k+ parts
-
Mouser Electronics
$0.960
$0.548
$0.491
Newark
$0.968
$0.553
$0.479
Farnell
$1.027
$0.629
$0.481
$0.442
Future Electronics
$0.335
Arrow
$0.345
Verical
$0.389
Nova Conductors
$0.418
Maritex
$0.777
$0.458
$0.439
Chip Stock
Vyrian
NAC Semi
$0.627
VNN
IBS Electronics
$0.455
Ampacity Inc.
$0.279
Semicontronic
$0.272
$0.271
Argo Parts USA
$0.405
Netroflash
$0.410
Aztec Data Supply Inc.
$4.100
Modulus Dynamics
$8.137
Corohmni
$9.209
Lixinc
Robosynatics
Lucentia Tech
$5.557
$5.443
Continental Prestige Electronics
$0.495
$0.407
Graphics Display Drivers AL8843QSP-13 attributes and parameters. Explore more Graphics Display Drivers devices from Diodes Incorporated
Interface IC Type:
JESD-609 Code:
Peak Reflow Temperature (C):
Terminal Finish:
AL8843QSP-13 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Gec Plessey Semiconductors
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1554216004
Molex
WIRE AND CABLE;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
PCA9532PW,118
NXP Semiconductors
PCA9532PW,118 by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 segments. It operates b/w -40 to 85 °C and has a supply voltage range of 2.3-5.5 V. This small outline IC is ideal for industrial applications requiring precise graphics display control.
LM3414HVMRX/NOPB
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
LTC3219EUD#PBF
Analog Devices
LTC3219EUD#PBF by Analog Devices is a graphics display driver with serial data input mode. It operates b/w 2.9V to 5.5V, suitable for LED display drivers in applications requiring a min fmax of 1.05MHz and operating temperatures from 0°C to 85°C.
FAN5702UMP15X
FAN5702UMP15X by Onsemi is a SERIAL graphics display driver with 16 terminals, operating voltage range of 2.7V to 5.5V, and industrial temperature grade up to 85°C. Ideal for LED display driver applications due to its compact square package style and low power consumption at 0.4 MHz frequency.
TLC5922DAP
TLC5922DAP by Texas Instruments is a graphics display driver with 16 segments, operating at 3-5.5V. It features serial data input mode, constant-current output, and a max supply current of 65mA. Ideal for LED display applications requiring small outline packaging and standard interface IC type.
BCR450E6327HTSA1
Infineon Technologies
Infineon's BCR450E6327HTSA1 is a 6-terminal LED display driver with a max supply voltage of 27V and min of 8V. Its small outline, thin profile package makes it ideal for graphics applications requiring precise control over LED displays. The device features bipolar technology, gull wing terminals, and is surface mountable for compact designs.
TLC5925IDWRG4
TLC5925IDWRG4 by Texas Instruments is a graphics display driver with 16 segments, serial data input mode, and constant-current output. Ideal for LED displays in automotive applications due to its small outline package style and dual terminal position. Operating temperature ranges from -40 to 125°C.
FAN5640S7X
FAN5640S7X by Onsemi is a LED display driver with 4 segments, operating voltage range of 6-20V. It has a compact thin profile package suitable for industrial applications. With dual terminals and matte tin finish, it can handle temperatures from -40 to 85°C efficiently.
LT3797ELXE#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE;
PCF8551ATT/AY
PCF8551ATT/AY by NXP Semiconductors is a Graphics Display Driver with DOT MATRIX display mode, SERIAL data input mode, and 18-DIGIT capacity. It operates at 1.8-5.5V, -40 to 85°C temperature range, suitable for LIQUID CRYSTAL DISPLAY applications requiring multiplexed display capability in compact designs.
MAX6964AEG+
MAX6964AEG+ by Analog Devices is a graphics display driver with a serial data input mode. It operates at a max supply voltage of 3.6V and has 24 terminals in a small outline, shrink pitch package style. This IC is commonly used as an LED display driver in automotive applications.
TLC5926IDBQRG4
TLC5926IDBQRG4 by Texas Instruments is a graphics display driver with 16 segments. It operates at a supply voltage range of 3V to 5.5V and has a max operating temperature of 85°C. This LED display driver is commonly used in industrial applications for driving graphics displays efficiently.
LT3518IUF#PBF
LT3518IUF#PBF by Analog Devices is a graphics display driver with a package body material of PLASTIC/EPOXY. It has a max supply voltage of 30V and operates in temperatures ranging from -40 to 125 °C. This LED display driver is commonly used in automotive applications.
TL4242TDRJRQ1
TL4242TDRJRQ1 by Texas Instruments is a graphics display driver with a max supply voltage of 42V and power supplies of 13.5V, suitable for LED display driver applications. It operates in industrial temperature range (-40 to 105°C) and has constant-current output characteristics, making it ideal for various automotive electronics.
LT3797EUKG#TRPBF
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 52; Package Code: HVQCCN; Package Shape: RECTANGULAR;
PCA9633PW,112
NXP Semiconductors' PCA9633PW,112 is a serial LED display driver with 16 terminals and a supply voltage range of 2.3V to 5.5V. It operates in industrial temperatures (-40°C to 85°C) and has a max frequency of 1MHz. Ideal for graphics displays, this small-outline IC supports up to four segments and features a gull-wing terminal form for surface mounting applications.
LT3763EFE#TRPBF
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR;
LM3414SDX/NOPB
LM3414SDX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and power supplies of 24V. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With constant-current output characteristics, this LED display driver has a small outline package style and dual terminal position.
TLC5917IDR
TLC5917IDR by Texas Instruments is a graphics display driver with 16 terminals, operating voltage range of 3-5.5 V, and constant-current output. It features serial data input mode for segment display applications in automotive industry, with small outline package style and peak reflow temperature of 260°C.
LM3409MYX/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AL8860WT-7
Diodes Inc.'s AL8860WT-7 is a LED display driver with 3 segments, operating at -40 to 85 °C. It has a supply voltage range of 4.5V to 40V and comes in a small outline package suitable for industrial applications. The terminal finish is matte tin, with dual position gull wing terminals on a rectangular body measuring 1.6mm wide by 2.9mm long and seated at 1mm height.
AL8860QMP-13
LED DISPLAY DRIVER; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
AL8860MP-13
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
AL8861WT-7
Diodes Inc.'s AL8861WT-7 is a LED display driver with 5 terminals, operating from -40 to 85 °C. It supports a supply voltage range of 4.5V to 40V and has an open-drain output. Ideal for industrial applications requiring small outline, thin profile packages with surface mount capability.
AL8861MP-13
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
AL8861QMP-13
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE; No. of Functions: 1;
AL8871QT16E-13
AL8871QT16E-13 by Diodes Inc. is a graphics display driver with 16 terminals, operating from -40 to 125 °C. It has a supply voltage range of 8-60 V and is suitable for automotive applications due to its small outline package style and matte tin terminal finish.
AL8805W5-7
AL8805W5-7 by Diodes Inc. is a LED display driver with 8 segments, operating at 6-30V. It has a small outline package style, suitable for automotive applications due to its wide temperature range of -40 to 125°C. The terminal finish is matte tin with dual position gull wing terminals.
AL8861Y-13
Diodes Inc. AL8861Y-13 is a LED display driver with 5 terminals, operating voltage range of 4.5V to 40V, and industrial temperature grade up to -40°C to 85°C. It comes in a small outline package suitable for graphics displays, offering high reliability and performance for various applications.
AL8862SP-13
AL8862SP-13 by Diodes Inc. is a LED display driver with 8 terminals, operating from -40 to 105 °C. It supports supply voltage range of 5-60 V and comes in small outline package suitable for industrial applications.
AL8807MP-13
AL8807MP-13 by Diodes Inc. is a LED display driver with 8 terminals, operating voltage range of 6-30V, and temp grade for automotive applications. It comes in a small outline package with matte tin finish, suitable for graphics displays requiring high temperature tolerance up to 125°C.
AL8863SP-13
AL8863SP-13 by Diodes Inc. is a LED display driver with 8 terminals, operating voltage range of 4.5V to 60V, and temp grade for automotive applications. It features small outline package style, matte tin terminal finish, and dual terminal position for efficient performance in graphics displays.
AL8843SP-13
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
AL8806MP8-13
AL8806MP8-13 by Diodes Inc. is a LED display driver with 8 segments, operating at 6-30V. Its small outline package has dual terminals and matte tin finish, suitable for graphics displays requiring a nominal 12V power supply. With a compact size of 3x3.1mm and peak reflow temp of 260°C, it's ideal for space-constrained applications.
AL8862FF-7
LED DISPLAY DRIVER; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4; Peak Reflow Temperature (C): 260;
AL8808WT-7
AL8808WT-7 by Diodes Inc. is a graphics display driver with 5 terminals, operating at -40 to 125 °C. It has a supply voltage range of 6-30 V and is ideal for automotive LED display applications due to its constant-current output characteristics.
AL8807W5-7
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
AL8807BMP-13
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Package Body Material: PLASTIC/EPOXY;
AL8853S-13
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved