Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Diodes Inc.'s AL8861QMP-13 is an LED display driver with a supply voltage range of 4.5V to 40V, AEC-Q100 screening, and operating temperature from -40°C to 125°C. It comes in a small outline package with 8 terminals and is suitable for automotive graphics displays due to its high reliability and wide supply voltage range.
Median Price
$0.450
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.720
100+ parts
$0.402
1k+ parts
$0.374
10k+ parts
-
Newark
$0.742
$0.413
$0.353
DigiKey
$0.316
RS (Exports)
$0.504
Verical
$0.370
Arrow
$0.278
Farnell
$0.550
$0.375
$0.334
Element14
$0.397
$0.394
Nova Conductors
$0.379
Vyrian
Chip Stock
Sensible Micro Corp
Bristol Electronics
$0.314
$0.234
$0.218
NAC Semi
$0.388
Dan-Mar Components
VNN
Ampacity Inc.
$0.235
Semicontronic
$0.229
$0.228
Argo Parts USA
$0.367
Netroflash
$0.360
$0.352
Corohmni
$2.436
Advanced Electronics
$5.557
$5.279
Aztec Data Supply Inc.
$12.340
Continental Prestige Electronics
$0.425
$0.290
$0.256
iodParts Technologies Inc.
Authorized Procurement Solutions
GreenTree Electronics
Lixinc
Glotronic Ltd.
The use of plastic/epoxy material makes the package lightweight and durable, suitable for portable and rugged applications.
With a high maximum supply voltage, this product can handle a wide range of power sources, making it versatile for various setups.
The square package shape allows for efficient use of board space, making it easier to incorporate multiple drivers in a compact design.
The nominal supply voltage of 16V is a common standard in many applications, ensuring compatibility with a wide range of systems.
With a high maximum operating temperature, this display driver can withstand extended periods of use without overheating, ensuring reliable performance.
Graphics Display Drivers AL8861QMP-13 attributes and parameters. Explore more Graphics Display Drivers devices from Diodes Incorporated
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
AL8861QMP-13 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Microsemi
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Lite-on Semiconductor
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138W-7-F
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Taiwan Semiconductor
PAM2863ECR
PAM2863ECR by Diodes Inc. is a graphics display driver with 8 terminals, operating b/w -40 to 85°C. It supports LED displays with 5 segments, a supply voltage range of 4.5-40V, and compact dimensions of 4.9mm x 3.9mm for industrial applications.
LP5521YQ/NOPB
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
TLC5916ID
TLC5916ID by Texas Instruments is a graphics display driver with 16 terminals, operating voltage range of 3-5.5 V, and constant-current output. It features serial data input mode for segment display applications in automotive industry, with small outline package style and Gull Wing terminal form for surface mount assembly.
TLC5928PWPRG4
TLC5928PWPRG4 by Texas Instruments is a graphics display driver with 16 segments, operating at 35 MHz. It features a serial data input mode, terminal pitch of 0.65 mm, and supports supply voltages of 3.3/5 V. Ideal for LED displays in industrial applications due to its compact size and high temperature tolerance up to 85°C.
PCA9632DP2Z
NXP Semiconductors
PCA9632DP2Z by NXP Semiconductors is a LED display driver with 10 terminals, operating voltage range of 2.3V to 5.5V, and serial data input mode. It has a small outline package style suitable for graphics displays applications, with standard input characteristics and max frequency of 1MHz.
TLC59116ITPWRQ1
TLC59116ITPWRQ1 by Texas Instruments is a graphics display driver with 16 channels, operating at -40 to 105 °C. It features a serial data input mode, small outline package style, and nickel palladium gold terminal finish. Ideal for LED displays in industrial applications due to its low min supply voltage of 3 V and max supply voltage of 5.5 V.
LM3914V
LM3914V by Texas Instruments is a LED display driver with 10-digit segments. It operates b/w 3-20 V, ideal for bar graph displays in commercial applications. This chip carrier package has 20 terminals and supports parallel data input mode.
PLP5012PWR
Display Drivers; Temperature Grade: INDUSTRIAL; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
BCR401UW6Q-7
Diodes Incorporated's BCR401UW6Q-7 is a graphics display driver with a max supply voltage of 40V. This LED display driver has 2 segments and operates at a nominal voltage of 10V. With AEC-Q101 screening level, it is ideal for automotive applications due to its small outline package style and dual terminal position.
AL8860WT-7
Diodes Inc.'s AL8860WT-7 is a LED display driver with 3 segments, operating at -40 to 85 °C. It has a supply voltage range of 4.5V to 40V and comes in a small outline package suitable for industrial applications. The terminal finish is matte tin, with dual position gull wing terminals on a rectangular body measuring 1.6mm wide by 2.9mm long and seated at 1mm height.
ICM7224IPL
Rochester Electronics
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
HV9910BNG-G-M934
HV9910BNG-G-M934 by Microchip Technology is a graphics display driver with a max supply voltage of 450V. It has a small outline package style and is suitable for automotive applications.
PCF85162T/1Y
NXP Semiconductors' PCF85162T/1Y is a graphics display driver with dot matrix and segment display modes. It operates at 1.8-5.5V, suitable for industrial applications with a temperature range of -40 to 85°C. The IC features a serial data input mode, 16-digit display capability, and small outline package style for compact designs.
PCA9624PW,118
PCA9624PW,118 by NXP Semiconductors is a Graphics Display Driver with 24 terminals. It operates b/w -40 to 85°C and supports a serial data input mode. Ideal for LED displays, it has a max supply voltage of 5.5V and small outline package style.
MAX7221EWG-T
Maxim Integrated
MAX7221EWG-T by Maxim Integrated is a graphics display driver with 8-digit display capability. It operates on a supply voltage range of 4V to 5.5V, making it suitable for industrial applications. With a serial data input mode and multiplexed display feature, it is ideal for LED display driver interface ICs.
IS31FL3731C-SALS2
Integrated Silicon Solution
IS31FL3731C-SALS2 by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. It operates b/w -40 to 85 °C and supports up to 144 segments. Ideal for industrial applications requiring small outline, surface mount package style.
TPS92518HVPWPT
TPS92518HVPWPT by Texas Instruments is a graphics display driver with 2 channels, operating at -40 to 125 °C. It features a serial data input mode, small outline package style, and supports a max supply voltage of 65 V. Ideal for automotive applications requiring LED display drivers in compact designs.
MAX6955AAX+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX7221EWG+T
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
ILD4001E6327HTSA1
Infineon Technologies
Infineon's ILD4001E6327HTSA1 is a LED display driver with 6 terminals, suitable for graphics applications. It operates b/w 4.5V to 42V, making it versatile for various display projects. With a compact rectangular package style and gull wing terminal form, it offers efficient performance in small outline designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AL8860QMP-13
LED DISPLAY DRIVER; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
AL8860MP-13
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
AL8861WT-7
Diodes Inc.'s AL8861WT-7 is a LED display driver with 5 terminals, operating from -40 to 85 °C. It supports a supply voltage range of 4.5V to 40V and has an open-drain output. Ideal for industrial applications requiring small outline, thin profile packages with surface mount capability.
AL8861MP-13
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
AL8871QT16E-13
AL8871QT16E-13 by Diodes Inc. is a graphics display driver with 16 terminals, operating from -40 to 125 °C. It has a supply voltage range of 8-60 V and is suitable for automotive applications due to its small outline package style and matte tin terminal finish.
AL8805W5-7
AL8805W5-7 by Diodes Inc. is a LED display driver with 8 segments, operating at 6-30V. It has a small outline package style, suitable for automotive applications due to its wide temperature range of -40 to 125°C. The terminal finish is matte tin with dual position gull wing terminals.
AL8861Y-13
Diodes Inc. AL8861Y-13 is a LED display driver with 5 terminals, operating voltage range of 4.5V to 40V, and industrial temperature grade up to -40°C to 85°C. It comes in a small outline package suitable for graphics displays, offering high reliability and performance for various applications.
AL8862SP-13
AL8862SP-13 by Diodes Inc. is a LED display driver with 8 terminals, operating from -40 to 105 °C. It supports supply voltage range of 5-60 V and comes in small outline package suitable for industrial applications.
AL8807MP-13
AL8807MP-13 by Diodes Inc. is a LED display driver with 8 terminals, operating voltage range of 6-30V, and temp grade for automotive applications. It comes in a small outline package with matte tin finish, suitable for graphics displays requiring high temperature tolerance up to 125°C.
AL8843QSP-13
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
AL8863SP-13
AL8863SP-13 by Diodes Inc. is a LED display driver with 8 terminals, operating voltage range of 4.5V to 60V, and temp grade for automotive applications. It features small outline package style, matte tin terminal finish, and dual terminal position for efficient performance in graphics displays.
AL8843SP-13
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
AL8806MP8-13
AL8806MP8-13 by Diodes Inc. is a LED display driver with 8 segments, operating at 6-30V. Its small outline package has dual terminals and matte tin finish, suitable for graphics displays requiring a nominal 12V power supply. With a compact size of 3x3.1mm and peak reflow temp of 260°C, it's ideal for space-constrained applications.
AL8862FF-7
LED DISPLAY DRIVER; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4; Peak Reflow Temperature (C): 260;
AL8808WT-7
AL8808WT-7 by Diodes Inc. is a graphics display driver with 5 terminals, operating at -40 to 125 °C. It has a supply voltage range of 6-30 V and is ideal for automotive LED display applications due to its constant-current output characteristics.
AL8807W5-7
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
AL8807BMP-13
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Package Body Material: PLASTIC/EPOXY;
AL8853S-13
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved