Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV5219LG-MPB-E by Onsemi is a Graphics Display Driver with 49 terminals, BICMOS technology, and 2.6V nominal voltage. It operates b/w -30 to 85 °C and is suitable for LED display driver applications due to its very thin profile and fine pitch package style.
Median Price
$4.500
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$3.890
1k+ parts
$3.480
10k+ parts
$3.270
DigiKey
$5.110
Digiode
$4.313
Vyrian
$4.490
Corphita
$4.086
Component Stockers USA
$4.380
$4.120
$3.720
Corohmni
TANS Electronics
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
Kepictronics
UHIMA Technologies
Plastic and epoxy material ensures durability and reliability in various operating conditions.
Surface mount capability allows for easy installation and PCB design flexibility.
High maximum supply voltage provides compatibility with a wide range of power sources.
Square package shape allows for efficient use of space on the PCB.
Stable power supply at 2.6V ensures consistent performance of the graphics display driver.
Having 49 terminals allows for versatile connection options with other components.
Grid array package style with thin profile and fine pitch enables high-density mounting and efficient signal transmission.
Low minimum supply voltage makes the product energy-efficient and suitable for various power sources.
Wide operating temperature range of up to 85 °C ensures stable performance in different environments.
Low minimum operating temperature of -30 °C allows for use in extreme cold conditions.
Bottom terminal position facilitates easy PCB layout and connection with other components.
Low maximum seated height helps in space-saving and compact design of the graphics display driver.
Compact width of 5mm enables efficient placement and routing on the PCB.
Square shape with length of 5mm allows for a balanced and symmetrical design.
BICMOS technology offers a combination of high speed and low power consumption for efficient operation.
No lead terminal form meets environmental regulations and provides a reliable connection.
Low maximum supply current of 0.005 mA indicates energy efficiency and low power consumption.
Stable nominal supply voltage of 2.6V ensures consistent performance of the display driver.
Small terminal pitch of 0.65mm allows for high-density mounting and efficient signal routing.
MSL level 3 indicates the product can withstand exposure to moderate levels of moisture during handling and storage.
Designed specifically as an LED display driver for optimal performance and compatibility with LED displays.
Graphics Display Drivers LV5219LG-MPB-E attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LV5219LG-MPB-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z+T&R
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
STP16CP05TTR
STMicroelectronics
STP16CP05TTR by STMicroelectronics is a Graphics Display Driver with 16 segments, operating at 3-5.5V. It features serial data input mode, small outline package style, and automotive temperature grade. Ideal for LED display driver applications in automotive electronics due to its compact size and wide supply voltage range.
TLC5923DAPR
TLC5923DAPR by Texas Instruments is a graphics display driver with 32 terminals, operating voltage range of 3-5.5V, and serial data input mode. It is ideal for LED displays in industrial applications due to its small outline package style and dual terminal position. With a max temperature of 85°C, it offers reliable performance in various environments.
MAX6964AEG+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR;
FAN5702UC30X
Fairchild Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 16; Package Code: VFBGA; Package Shape: SQUARE;
PCA9633DP1,118
NXP Semiconductors
NXP Semiconductors' PCA9633DP1,118 is a graphics display driver with 4 segments and serial data input mode. Operating at -40 to 85°C, it has a supply voltage range of 2.3-5.5V and peak reflow temp of 260°C. Ideal for LED displays, this IC is in a small outline package with dual terminals and Gull Wing form factor.
TPS92518PWPT
TPS92518PWPT by Texas Instruments is a graphics display driver with 2 channels and serial data input mode. It operates b/w -40 to 125 °C, with a supply voltage range of 6.5-42 V. Ideal for automotive applications due to its small outline package style and high temperature grade.
LM3409MY/NOPB
National Semiconductor
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
LM3405AXMY/NOPB
LM3405AXMY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 22V and power supplies of 12V. It operates b/w -40 to 125°C, suitable for automotive applications. This LED display driver has a constant-current output and comes in a small outline package with dual terminals.
PCA9685PW
PCA9685PW by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 segments. It operates b/w -40 to 85 °C and supports supply voltages of 2.3-5.5 V, making it ideal for industrial applications requiring precise graphics display control.
CPC9909NE
IXYS Corporation
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR;
PCA9635PW,118
PCA9635PW,118 by NXP Semiconductors is a Graphics Display Driver with 16 segments. It operates b/w -40 to 85 °C and supports a serial data input mode. This LED display driver has a small outline package style and is suitable for industrial applications.
CAP1114-1-EZK-TR
Microchip Technology
CAP1114-1-EZK-TR by Microchip Technology is a SERIAL graphics display driver with 32 terminals, operating at temperatures from -40 to 125 °C. It has a max supply voltage of 3.6 V and a low supply current of 1 mA, making it ideal for automotive LED display driver applications.
PCF85162T/1Y
NXP Semiconductors' PCF85162T/1Y is a graphics display driver with dot matrix and segment display modes. It operates at 1.8-5.5V, suitable for industrial applications with a temperature range of -40 to 85°C. The IC features a serial data input mode, 16-digit display capability, and small outline package style for compact designs.
PCF85162T/1,118
NXP Semiconductors PCF85162T/1,118 is a Graphics Display Driver with 32 segments and 16 digits. It operates at a voltage range of 1.8V to 5.5V, making it suitable for industrial applications requiring multiplexed display capability. The driver features a small outline package with dual terminal position and Gull Wing form factor for easy surface mount installation.
ICM7218AIPI+
Analog Devices' ICM7218AIPI+ is a LED display driver with 8-digit segments, CMOS technology, and 5V nominal voltage. It supports multiplexed displays and operates in a temperature range of -20 to 85°C. Ideal for applications requiring precise graphics display drivers in various electronic devices.
MBI5324GLQ
Macroblock
MBI5324GLQ by Macroblock is a 48-terminal LED display driver with serial data input mode. It features constant-current output, Schmitt trigger input characteristics, and operates at a nominal voltage of 3.3V. Ideal for driving LED displays in various applications due to its low profile flatpack package style and quad terminal position.
LP5009PWR
LP5009PWR by Texas Instruments is a graphics display driver with 9 channels, operating at -40 to 85°C. It features a serial data input mode, 24 terminals in a small outline package, and supports true output polarity. Ideal for LED displays, it has a low profile design with a max supply voltage of 5.5V and terminal pitch of 0.65mm.
HEF4794BT,118
Nexperia
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
BCR420UFDQ-7
BCR420UFDQ-7 by Diodes Inc. is a graphics display driver with AEC-Q101 screening level. It features 6 terminals, small outline package style, and nickel palladium gold terminal finish. Ideal for LED display driver applications due to its compact size (2x2 mm) and surface mount capability.
AS1115-BSST
Ams Ag
AS1115-BSST by Ams Ag is a Graphics Display Driver with 8-DIGIT display, 7 segments, and SERIAL data input mode. Ideal for LED displays in industrial settings due to its wide operating temperature range of -40 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV5236VZ-TLM-H
LV5236VZ-TLM-H by Onsemi is a graphics display driver with 44 terminals and a supply voltage range of 4.5V to 5.5V. It operates in temperatures from -25°C to 75°C, suitable for LED display driver applications. This small outline package IC has a BICMOS technology, serial data input mode, and Gull Wing terminal form for efficient performance.
LV52204MUTBG
LV52204MUTBG by Onsemi is a Graphics Display Driver with 6 terminals, operating voltage range of 2.7V to 5.5V, and BICMOS technology. It is ideal for LED display driver applications due to its small outline package style and matte tin terminal finish, offering high performance in a compact design.
LV5207LP-E
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: QCCN; Package Shape: SQUARE;
LV5217GP-E
Display Drivers; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
LV52207NXB-VH
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: SQUARE;
LV52205MUTBG
Sanyo Semiconductor
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: SON; Package Shape: RECTANGULAR;
LV5217GP
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
LV5212VH-TLM-H
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e6; Terminal Finish: TIN BISMUTH;
LV5217GP-TE-L-E
LV5213LP
LV5213LP-E
LV5216CS-TE-L-E
Display Drivers; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 36; Package Code: FBGA; Package Shape: SQUARE;
LV5212VH-MPB-H
LV5207LP
LV5213LP-TE-L-E
LV5207LP-TE-L-E
LV5207LP-TE-L-E by Onsemi is a Graphics Display Driver with 24 terminals, BICMOS technology, and LED display driver interface. Operating voltage range of 3V to 4.5V makes it suitable for various applications requiring low power consumption and high performance in compact spaces. Ideal for driving LED segments in electronic displays due to its small form factor and surface-mount capability.
LV5215LF
Display Drivers; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: QCCN; Package Shape: SQUARE;
LV5215LF-TE-L-E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved