Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV5207LP-TE-L-E by Onsemi is a Graphics Display Driver with 24 terminals, BICMOS technology, and LED display driver interface. Operating voltage range of 3V to 4.5V makes it suitable for various applications requiring low power consumption and high performance in compact spaces. Ideal for driving LED segments in electronic displays due to its small form factor and surface-mount capability.
Median Price
$1.663
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.600
1k+ parts
$1.330
10k+ parts
$1.180
DigiKey
$2.000
Verical
$1.475
Digiode
$1.244
Chip Stock
Vyrian
Corphita
$1.179
Corohmni
$1.310
AZTECH Wire
$19.390
Continental Prestige Electronics
$1.250
A-Z Elektronik GmbH
Microchip USA
SupplyDigital Components
Alle Elektronik GmbH
Problanco Electronics
Authorized Procurement Solutions
Kepictronics
Kulean Microsystems
TANS Electronics
UHIMA Technologies
The PLASTIC/EPOXY material used in the package body provides durability and protection for the graphics display driver.
The high maximum supply voltage of 4.5 V allows for flexibility in power supply options for the graphics display driver.
The wide range of minimum operating temperature of -30 °C ensures the graphics display driver can function in various environments.
Utilizing BICMOS technology in the graphics display driver provides a balance between performance and power efficiency.
The LED display driver interface IC type ensures compatibility with LED displays, making it a suitable choice for LED-based applications.
Graphics Display Drivers LV5207LP-TE-L-E attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Minimum fmax:
LV5207LP-TE-L-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 21/Apr/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Semiconductor
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
TPS92518HVPWPR
Texas Instruments
TPS92518HVPWPR by Texas Instruments is a 24-terminal LED display driver with serial data input mode. It operates b/w -40 to 125 °C and supports a max supply voltage of 65 V. Ideal for automotive applications, it features a small outline package style and Gull Wing terminal form.
TLC5916INE4
TLC5916INE4 by Texas Instruments is a LED display driver with 8 segments, operating at 3-5.5V. It features constant-current output, serial data input mode, and a max supply current of 22mA. Ideal for automotive applications due to its temperature grade and through-hole terminal form.
LT3474EFE-1#PBF
Analog Devices
LT3474EFE-1#PBF by Analog Devices is a graphics display driver with a supply voltage range of 4V to 36V. It features a small outline package style with 16 terminals and operates in industrial temperature grades from -40°C to 85°C. Ideal for LED displays, this IC has a peak reflow temperature of 260°C and matte tin terminal finish.
LED1642GWQTR
LED1642GWQTR by STMicroelectronics is a SERIAL graphics display driver with 24 terminals, operating b/w -40 to 85 °C. It has a supply voltage range of 3-5.5 V, suitable for industrial applications requiring LED display drivers with a max frequency of 30 MHz and compact chip carrier package style.
PCF8566T/1,118
NXP Semiconductors
PCF8566T/1,118 by NXP Semiconductors is a 40-terminal graphics display driver with serial data input mode. It operates at supply voltages of 2.5V to 3.5V and supports multiplexed display capability for industrial temperature grade applications. The IC features a segment display mode and Gull Wing terminal form, making it suitable for liquid crystal displays in various electronic devices.
PCA9685PW,112
PCA9685PW,112 by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 segments. It operates b/w -40 to 85 °C and supports a supply voltage range of 2.3-5.5 V. Ideal for industrial applications due to its small size and low power consumption.
NSI45060JDT4G
NSI45060JDT4G by Onsemi is a small outline LED display driver with 3 terminals, matte tin finish, and gull wing terminal form. It has a peak reflow temperature of 260°C and is suitable for graphics display applications due to its compact size and surface mount capability.
LM3409HVMY
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE;
STCS2ASPR
STCS2ASPR by STMicroelectronics is a LED display driver with 10 terminals, operating voltage range of 4.5V to 40V, and BICMOS technology. Ideal for automotive applications due to its small outline package style and wide temperature range (-40°C to 125°C).
STP08DP05MTR
STP08DP05MTR by STMicroelectronics is a Graphics Display Driver with 8 segments, serial data input mode, and 5.5V max supply voltage. Ideal for LED display driver applications in automotive industry due to its small outline package style and dual terminal position.
LM3530UME-40/NOPB
LM3530UME-40/NOPB by Texas Instruments is a graphics display driver with 10 segments, operating voltage of 2.7V to 5.5V, and serial data input mode. It features a grid array package style with very thin profile and fine pitch, suitable for LED display driver applications in various electronic devices.
LT3952AHFE#PBF
Analog Devices' LT3952AHFE#PBF is a LED display driver with 16 segments, suitable for graphics applications. It operates b/w 3V to 42V, making it versatile for various voltage requirements. The small outline package with dual terminals and matte tin finish ensures compact design and reliable performance.
LM3409HVMYX/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
BCR401RE6327HTSA1
Infineon Technologies' BCR401RE6327HTSA1 is a LED display driver with 2 segments, operating at a nominal voltage of 10V and max supply voltage of 18V. This small outline, thin profile package with gull wing terminals is designed for graphics display applications.
FAN5702UC30X
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 16; Package Code: VFBGA; Package Shape: SQUARE;
LP5521YQX/NOPB
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
LT3599EFE#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR;
MAX6958BAEE
Maxim Integrated
MAX6958BAEE by Maxim Integrated is a 16-terminal LED display driver with serial data input mode, suitable for automotive applications. It operates at supply voltages of 3-5.5V, with a max temperature of 125°C. This CMOS technology IC supports multiplexed displays and has 4-digit capability in a small outline package.
CAT4237TD-GT3
CAT4237TD-GT3 by Onsemi is a Graphics Display Driver with 5.5V max supply voltage, 2.8V min supply voltage, and 85°C max operating temp. Ideal for LED display driver applications due to its compact size, CMOS technology, and industrial temperature grade suitability.
LM3410XMFX/NOPB
LM3410XMFX/NOPB by Texas Instruments is a small outline LED display driver with 5 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 2.7V to 5.5V. The package style is low profile and surface mountable, making it ideal for graphics display drivers in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV5236VZ-TLM-H
LV5236VZ-TLM-H by Onsemi is a graphics display driver with 44 terminals and a supply voltage range of 4.5V to 5.5V. It operates in temperatures from -25°C to 75°C, suitable for LED display driver applications. This small outline package IC has a BICMOS technology, serial data input mode, and Gull Wing terminal form for efficient performance.
LV52204MUTBG
LV52204MUTBG by Onsemi is a Graphics Display Driver with 6 terminals, operating voltage range of 2.7V to 5.5V, and BICMOS technology. It is ideal for LED display driver applications due to its small outline package style and matte tin terminal finish, offering high performance in a compact design.
LV5207LP-E
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: QCCN; Package Shape: SQUARE;
LV5217GP-E
Display Drivers; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
LV52207NXB-VH
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 9; Package Code: VFBGA; Package Shape: SQUARE;
LV52205MUTBG
Sanyo Semiconductor
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: SON; Package Shape: RECTANGULAR;
LV5217GP
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
LV5212VH-TLM-H
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e6; Terminal Finish: TIN BISMUTH;
LV5217GP-TE-L-E
LV5213LP
LV5219LG-MPB-E
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 49; Package Code: VFLGA; Package Shape: SQUARE;
LV5213LP-E
LV5216CS-TE-L-E
Display Drivers; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 36; Package Code: FBGA; Package Shape: SQUARE;
LV5212VH-MPB-H
LV5207LP
LV5213LP-TE-L-E
LV5215LF
Display Drivers; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: QCCN; Package Shape: SQUARE;
LV5215LF-TE-L-E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved