Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DTA1C by Onsemi is a TRIAC with 1A RMS current, 200V repetitive peak off-state voltage, and 125 °C max operating temp. Ideal for AC power control applications due to its low leakage current of 0.01mA, high holding current of 10mA, and trigger device type.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$0.826
Northwest PG Solutions
$0.909
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Problanco Electronics
Corphita
Corohmni
UHIMA Technologies
Low maximum on-state voltage helps in reducing power consumption and heat dissipation, resulting in energy efficiency.
Higher maximum DC gate trigger current ensures reliable and consistent switching of the TRIAC.
Low maximum leakage current ensures minimal power loss during off state, contributing to efficiency.
Wide operating temperature range allows for versatile applications in various environments.
Being a TRIAC, the product can control both positive and negative AC currents, making it suitable for AC power control applications.
High maximum RMS on-state current rating allows the TRIAC to handle heavy loads effectively.
Low maximum DC gate trigger voltage ensures efficient triggering of the TRIAC.
High repetitive peak off-state voltage makes the TRIAC suitable for high voltage applications.
Adequate maximum holding current ensures stable operation of the TRIAC in the on-state.
Triode For Alternating Current (TRIAC) DTA1C attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
Maximum Leakage Current:
Maximum On-state Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Trigger Device Type:
DTA1C Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
261
Deltrol Controls
Other Relays;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Infinex
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
Z0107MN0
NXP Semiconductors
Z0107MN0 by NXP Semiconductors is a single TRIAC with 4 terminals, capable of handling up to 1A RMS on-state current and 600V repetitive peak off-state voltage. It operates at a max temperature of 125°C and is designed as a surface-mount device for applications requiring 4-quadrant logic level triggering.
T1635H-8I
STMicroelectronics
SNUBBERLESS TRIAC;
TIC206D
Texas Instruments
TIC206D by Texas Instruments is a TRIAC with 3 terminals, max. RMS on-state current of 3A, and max. DC gate trigger voltage of 2V. It operates b/w -40 to 110°C, ideal for AC power control in various applications like dimmers and motor speed controllers.
BT139-600E,127
BT139-600E,127 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 16A max RMS on-state current. It has a 10mA max DC gate trigger current and operates at up to 125°C. Ideal for applications requiring precise control of AC power in various electronic devices.
BCR08AM-14A#BD0
Integrated Device Technology
TRIAC;
BT139X-600E,127
BT139X-600E,127 by NXP Semiconductors is a TRIAC with 16A RMS current and 600V repetitive peak off-state voltage. It has a max DC gate trigger current of 10mA and operates at temperatures up to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
T435-600B
T435-600B by STMicroelectronics is a snubberless TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It has a max DC gate trigger current of 35mA and operates b/w -40 to 125°C. Ideal for AC power control applications requiring high reliability in compact designs.
MAC8N
MAC8N by Onsemi is a TRIAC with 3 terminals, max. RMS on-state current of 8A, and max. DC gate trigger voltage of 1.5V. It is used in applications requiring AC switching such as dimmers, motor speed control, and heating control systems.
BTA316-800B0
Ween Semiconductors
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
TIC225C
TIC225C by Texas Instruments is a TRIAC with 8A RMS current, 300V repetitive peak off-state voltage, and 15mA max DC gate trigger current. It operates b/w -40 to 110°C and is ideal for AC power control applications due to its high reliability and low leakage current of 2mA.
BTB16-600CWRG
BTB16-600CWRG by STMicroelectronics is a single TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125°C, suitable for snubberless applications requiring up to 35mA DC gate trigger current. The package style is flange mount with through-hole terminals, ideal for AC power control in various electronic devices.
BTA16-600BRG
BTA16-600BRG by STMicroelectronics is a single TRIAC with 3 terminals and a max RMS on-state current of 16A. It operates in temperatures ranging from -40 to 125°C, with a max DC gate trigger voltage of 1.3V. Ideal for applications requiring precise control over AC power switching.
DTB3C
The Onsemi DTB3C is a TRIAC with max on-state voltage of 1.5V, DC gate trigger current of 30mA, and leakage current of 1mA. It operates b/w -40 to 110 °C, suitable for AC applications requiring max RMS on-state current of 3A. Ideal for controlling power in various electronic devices.
MAC223A8FP
MAC223A8FP by Onsemi is a single TRIAC with 25A RMS on-state current, 50mA DC gate trigger current, and 600V repetitive peak off-state voltage. Ideal for applications requiring 4-quadrant logic level TRIACs in temperatures ranging from -40 °C to 125°C.
BT131-600
Unisonic Technologies
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Shape: ROUND;
MAC4DLM-1G
MAC4DLM-1G by Onsemi is a 4 QUADRANT LOGIC LEVEL TRIAC with max RMS On-state Current of 4A and Repetitive Peak Off-state Voltage of 600V. Ideal for AC applications, it has a DC Gate Trigger Current of 3mA and operates b/w -40 to 110 °C, making it suitable for various electronic devices.
T2535T-8G-TR
SNUBBERLESS TRIAC; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
BTB12-600BW3G
BTB12-600BW3G by Onsemi is a TRIAC with 12A RMS current, 600V repetitive peak off-state voltage, and 50mA DC gate trigger current. Ideal for applications requiring precise AC power control in various electronic devices.
T1235H-6G-TR
T1235H-6G-TR by STMicroelectronics is a snubberless TRIAC with a max RMS on-state current of 12A and a repetitive peak off-state voltage of 600V. It is commonly used in applications requiring AC power control, such as lighting dimmers and motor speed control.
BTA06-400CRG
BTA06-400CRG by STMicroelectronics is a TRIAC with 1.5V max on-state voltage, 25mA max DC gate trigger current, and 6A max RMS on-state current. It is ideal for applications requiring precise AC power control such as dimmer switches, motor speed controllers, and heating control systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DTA1
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 2 V; Repetitive Peak Off-state Voltage: 400 V; Maximum DC Gate Trigger Current: 5 mA; Maximum On-state Voltage: 1.5 V;
DTA10C
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 3 V; Repetitive Peak Off-state Voltage: 200 V; Maximum RMS On-state Current: 10 A; Maximum Leakage Current: 2 mA;
DTA10E
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 1.5 V; Maximum RMS On-state Current: 10 A; Maximum On-state Voltage: 1.4 V; Minimum Operating Temperature: -40 Cel;
DTA10F
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Voltage: 1.5 V; Maximum DC Gate Trigger Current: 30 mA; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -40 Cel;
DTA10G
TRIAC; Surface Mount: NO; Minimum Operating Temperature: -40 Cel; Maximum Leakage Current: 2 mA; Maximum DC Gate Trigger Voltage: 1.5 V; Maximum Operating Temperature: 150 Cel;
DTA12C
TRIAC; Surface Mount: NO; Maximum Leakage Current: 2 mA; Maximum DC Gate Trigger Current: 50 mA; Maximum On-state Voltage: 1.4 V; Maximum RMS On-state Current: 12 A;
DTA12E
TRIAC; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Maximum Leakage Current: 2 mA; Maximum DC Gate Trigger Voltage: 3 V; Maximum DC Gate Trigger Current: 50 mA;
DTA12F
TRIAC; Surface Mount: NO; Maximum On-state Voltage: 1.4 V; Repetitive Peak Off-state Voltage: 500 V; Maximum DC Gate Trigger Current: 50 mA; Maximum DC Gate Trigger Voltage: 3 V;
DTA12G
TRIAC; Surface Mount: NO; Maximum On-state Voltage: 1.4 V; Maximum RMS On-state Current: 12 A; Repetitive Peak Off-state Voltage: 600 V; Maximum DC Gate Trigger Current: 50 mA;
DTA16C
TRIAC; Surface Mount: NO; Maximum Leakage Current: 2 mA; Maximum Operating Temperature: 125 Cel; Repetitive Peak Off-state Voltage: 200 V; Maximum RMS On-state Current: 16 A;
DTA16E
TRIAC; Surface Mount: NO; Repetitive Peak Off-state Voltage: 400 V; Maximum DC Gate Trigger Current: 50 mA; Maximum DC Gate Trigger Voltage: 3 V; Maximum RMS On-state Current: 16 A;
DTA16F
TRIAC; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; Maximum On-state Voltage: 1.4 V; Maximum DC Gate Trigger Voltage: 3 V; Maximum Leakage Current: 2 mA;
DTA16G
TRIAC; Surface Mount: NO; Maximum Operating Temperature: 125 Cel; Maximum On-state Voltage: 1.4 V; Repetitive Peak Off-state Voltage: 600 V; Maximum RMS On-state Current: 16 A;
DTA1E
TRIAC; Surface Mount: NO; Maximum DC Gate Trigger Current: 5 mA; Maximum DC Gate Trigger Voltage: 2 V; Repetitive Peak Off-state Voltage: 400 V; Maximum Leakage Current: .01 mA;
DTA1C
Sanyo Electric
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Elements: 1;
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Qualification: Not Qualified;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved