Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Onsemi's AR0238CSSC12SHRA0-DR is a 3x3 um CMOS image sensor with 1928H x 1088V pixels, offering a dynamic range of 96 dB. Operating at -30 to 85 °C, it has a max supply voltage of 1.95 V and supports a frame rate of 60 fps. Ideal for applications requiring high-resolution imaging in compact devices.
Median Price
$12.168
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$10.630
1k+ parts
$9.510
10k+ parts
$8.950
DigiKey
$13.990
Farnell
$11.050
Verical
$13.287
$11.887
$11.188
Vyrian
Digiode
$11.780
Chip Stock
Native Components
$1.344
Northwest PG Solutions
$1.478
Corohmni
Corphita
$11.160
Continental Prestige Electronics
SupplyDigital Components
TANS Electronics
Problanco Electronics
Kulean Microsystems
Authorized Procurement Solutions
UHIMA Technologies
Smaller pixel size allows for higher resolution images with greater detail.
Higher maximum supply voltage allows for better performance and flexibility in various applications.
High master clock frequency enables fast data readout and processing speed.
Compact body width allows for easy integration into a variety of devices or systems.
CMOS image sensors are known for low power consumption and high image quality, making them a popular choice in various applications.
Low body height enables slim and compact designs for devices or systems.
Square package shape allows for efficient use of space and easy mounting.
Lower minimum supply voltage helps in saving power and extending battery life in portable devices.
High maximum operating temperature ensures reliable performance in a wide range of environments.
High horizontal pixel count enables capturing detailed images with high resolution.
Wide output range allows for versatile signal output suitable for various applications.
Digital current output simplifies signal processing and enhances accuracy.
Low minimum operating temperature ensures reliable operation even in extreme cold environments.
High maximum operating current supports power-hungry applications and ensures reliable performance under load.
Plastic housing provides a lightweight and cost-effective solution for the sensor.
High dynamic range allows for capturing a wide range of light intensities without losing detail or contrast.
High vertical pixel count contributes to the overall image quality and detail of the captured images.
Compact body length/diameter allows for easy integration and mounting in space-constrained designs.
Standard optical format for compatibility with various lenses and imaging systems.
Solder termination ensures secure electrical connections for reliable operation.
2-wire interface simplifies connectivity and communication with other devices or systems.
High frame rate allows for capturing fast-moving objects or scenes with smooth and clear motion.
Frame array type enables capturing complete frames for each image, leading to better image quality and processing.
Surface mounting feature allows for easy and secure attachment to PCBs or other surfaces.
Image Sensors AR0238CSSC12SHRA0-DR attributes and parameters. Explore more Image Sensors devices from Onsemi
Additional Features:
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Dynamic Range:
Frame Rate:
Horizontal Pixel:
Housing:
Master Clock:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Output Interface Type:
Output Range:
Output Type:
Package Shape or Style:
Pixel Size (um):
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Vertical Pixel:
PCN Obsolescence/ EOL - Mult Dev EOL 30/Jun/2022
PCN Design/Specification - AR0238 Doc Update 5/Feb/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Solid State Devices
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
MT9P001I12-N4005-DR
The Onsemi MT9P001I12-N4005-DR is a CMOS image sensor with 2592x1944 pixels, 70.1 dB dynamic range, and 48 MHz master clock. It operates at -30 to 70 °C, with output range of 2.60-22.30mA for digital current applications like surveillance cameras and industrial imaging systems.
AR0144CSSC00SUKA0-CPBR
The Onsemi AR0144CSSC00SUKA0-CPBR is a 1/4 inch CMOS image sensor with 1280x800 resolution, 3x3 um pixel size, and 60 fps frame rate. It features a rectangular package shape for surface mount applications.
KAF-1402ME
Image Sensors;
TC285SPD-B0
TC285SPD-B0 by Texas Instruments is an 8x8 um Image Sensor with 1004 horizontal and 1002 vertical pixels. It operates at -10 to 55 °C, powered by a 14V supply. Ideal for THROUGH HOLE MOUNT applications in various industries.
NOIP1FN5000A-LTI
NOIP1FN5000A-LTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592x2048 pixels, offering a dynamic range of 60 dB and sensitivity of 7.5 V/lx.s. It operates b/w -40 to 85 °C, has a max supply voltage of 1.9 V, and supports a frame rate of 100 fps. Ideal for applications requiring high-resolution imaging in various lighting conditions.
MT9J003I12STCV2-TP
MT9J003I12STCV2-TP by Onsemi is a CMOS image sensor with 3856x2764 pixels, 1.67um pixel size, and 65.2dB dynamic range. It operates at -30 to 70°C, has a digital output interface, and is ideal for high-resolution imaging applications requiring fast frame rates up to 60fps.
KAI-01050-CBA-FD-AE
Onsemi's KAI-01050-CBA-FD-AE is a 5.5x5.5 um CCD image sensor with 1024x1024 pixels, offering a dynamic range of 64 dB. It operates b/w -50 to 70 °C and has a supply voltage range of 14.5V to 15.5V. Ideal for digital imaging applications requiring high-quality output in a compact square package.
MT9D112D00STCK15AC1
AR0330SR1C00SUKA0-CR
The Onsemi AR0330SR1C00SUKA0-CR is a 1/3 inch CMOS image sensor with 2304 (H) x 1296 (V) pixels. It operates at a max supply voltage of 1.9V and offers a dynamic range of 69.5 dB. Ideal for applications requiring high-resolution imaging, such as surveillance cameras and industrial machine vision systems.
KAF-0402-AAA-CB-AE
The Onsemi KAF-0402-AAA-CB-AE is a CCD image sensor with 9x9 um pixel size, offering 768 horizontal and 512 vertical pixels. It operates at a supply voltage range of 14.75V to 15.5V, providing a dynamic range of 76 dB. This rectangular package sensor has a data rate of 10 Mbps and is suitable for full-frame imaging applications.
AS0140AT
AS0140AT by Onsemi is an image sensor with 3x3 um pixel size, 1.7-1.98V supply voltage range, and 27 MHz master clock. Ideal for applications requiring a 1280x800 linear array sensor with a digital voltage output interface, such as surveillance cameras and industrial imaging systems.
KAC-00401-CBC-LB-A0
Onsemi's KAC-00401-CBC-LB-A0 Image Sensor features 6.7X6.7um pixel size, 3.3V power supply, and operates b/w -40 to 105 °C. With 768x488 pixels, it is ideal for surface mount applications in various imaging systems.
KAI-50140-AXA-JD-B1
KAI-50140-AXA-JD-B1 by Onsemi is an image sensor with 4.5X4.5 um pixel size, 60 MHz master clock, and 10440 horizontal pixels. It operates b/w -50 to 60 °C and has a dynamic range of 60 dB. Ideal for applications requiring high-resolution imaging in various industries.
KAE-04471-ABA-JP-FA
The Onsemi KAE-04471-ABA-JP-FA is a 7.4x7.4 um CCD image sensor with 2096 (H) x 2096 (V) pixels, offering a dynamic range of 72 dB. Operating b/w -30 to 40 °C, it has a voltage output and supports up to 20 Mbps data rate. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
KAI-08050-AAA-JR-BA
KAI-08050-AAA-JR-BA by Onsemi is an image sensor with 5.5x5.5 um pixel size, 15.5V max supply voltage, and 3296 horizontal pixels. Ideal for applications requiring a CCD image sensor with a dynamic range of 64 dB, such as industrial machine vision systems or medical imaging devices.
KAI-4010CM
TCD1304DG(8Z,AW)
Toshiba
Toshiba's TCD1304DG(8Z,AW) is an 8X200 um CCD image sensor with a 2 MHz master clock. Operating at 3-5.5V, it offers a spectral response of 400-1200nm and sensitivity of 160 V/lx.s. Ideal for applications requiring high-resolution imaging in industrial automation and scientific instruments.
KAI-02170-FBA-JD-BA
KAI-02170-FBA-JD-BA by Onsemi is an image sensor with 1920x1080 resolution, 7.4um pixel size, and 70.2dB dynamic range. It operates b/w -50 to 70 °C and has a supply voltage range of 14.5V to 15.5V. Ideal for applications requiring high-quality imaging in various environmental conditions.
MT9V034C12STC-DP1
Onsemi's MT9V034C12STC-DP1 is a 6x6 um CMOS image sensor with 752H x 480V pixels, offering a dynamic range of 100 dB. Operating at 3-3.6 V, it has a max frame rate of 60 fps and uses a digital current output interface. Ideal for applications requiring high-resolution imaging in varying lighting conditions.
NOIP1SE1300A-QTI
NOIP1SE1300A-QTI by Onsemi is an image sensor with 4.80x4.80 um pixel size, 72 MHz master clock, and 1/2 inch optical format. It operates b/w -40 to 85 °C and has a dynamic range of 60 dB. Ideal for applications requiring high-speed digital imaging with a frame rate of 210 fps.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AR0234CSSM00SUKA0-CP1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Maximum Supply Voltage: 1.26 V;
AR0234CSSC00SUKA0-CP1
The Onsemi AR0234CSSC00SUKA0-CP1 image sensor features 1920x1200 resolution, 3x3 um pixel size, and 71.4 dB dynamic range. It is ideal for applications requiring high-quality digital imaging such as surveillance cameras, automotive vision systems, and drones due to its compact rectangular package and 120 fps frame rate.
AR0234CSSC28SUKA0-CP1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Optical Format (inch): 1/2.6;
AR0234CSSM00SUKA0-CP
Onsemi's AR0234CSSM00SUKA0-CP is a CMOS image sensor with 1920x1200 resolution, 3x3 um pixel size, and 71.4 dB dynamic range. It operates at -40 to 85 °C, outputs digital voltage from 0.4-1.26V, and has a frame rate of 120 fps. Ideal for applications requiring high-resolution imaging in automotive or surveillance systems.
AR0234CSSM28SUKA0-CP1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Dynamic Range: 71.4 dB;
AR0234CSSC00SUKA0-CP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Frame Rate: 120 fps;
AR0234CSSC28SUKA0-CP
AR0234CSSC28SUKA0-CP by Onsemi is a CMOS image sensor with 1920x1200 resolution, 3x3 um pixel size, and 71.4 dB dynamic range. It operates at -40 to 85 °C and has a frame rate of 120 fps. Ideal for applications requiring high-quality digital imaging in automotive, surveillance, or industrial settings.
AR0231AT7C00XUEA0-DPBR-E
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: RECTANGULAR; Array Type: LINEAR; Output Interface Type: 2-WIRE INTERFACE;
AR0233AT2B17XUEA0-DRBR-E
Onsemi's AR0233AT2B17XUEA0-DRBR-E is a CMOS image sensor with 2048x1280 resolution, 41.58 dB dynamic range, and MIPI output interface. Ideal for applications requiring high-quality imaging at 60 fps, such as surveillance cameras and automotive vision systems.
AR0234CSSM00SUKA0-CR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Termination Type: SOLDER;
AR0234CSSC00SUKA0-CR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Pixel Size (um): 3X3;
AR0234CSSC28SUKA0-CR
AR023ZMCSC00SUEA0-DRBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.50V; Body Width: 10 inch;
AR0239SRSC00SUEA0-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; JESD-609 Code: e1; Vertical Pixel: 1188; Pixel Size (um): 3X3; Output Interface Type: 2-WIRE INTERFACE;
AR0230CSSC00SUEA0-DRBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.50V; Output Interface Type: 2-WIRE INTERFACE;
AR0238CSSC12SHRA0-DP1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: SQUARE; Output Range: -22-22mA; Minimum Operating Temperature: -30 Cel;
AR0239SRSC00SUEA0-DPBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Frame Rate: 90 fps; Vertical Pixel: 1188; Pixel Size (um): 3X3; Array Type: SINGLE FRAME;
AR0220AT4R00XUEA1-TPBM
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Array Type: FRAME;
AR0221SR2C00SUEA0-DRBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Frame Rate: 60 fps; Array Type: FRAME; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
AR0220AT3R00XUEA0-DRBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.20V; Body Width: 9 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved