Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi 2SB1143S is a PNP Power BJT with hFE of 140, VCE of 50V, and IC of 4A. Ideal for switching applications, it has a fT of 150MHz and comes in a plastic/epoxy package with through-hole terminals.
Median Price
$0.314
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.277
1k+ parts
$0.230
10k+ parts
$0.205
DigiKey
$0.350
Flip Electronics (Authorized)
Digiode
$0.217
Vyrian
$0.228
Nova Conductors
$0.507
DigiKey Marketplace
ACDS - Activité Composants Distribution Service
R&J Components
Flip Electronics
LittleDiode
Corphita
Corohmni
Native Components
$0.248
$0.238
Northwest PG Solutions
$0.273
$0.241
Continental Prestige Electronics
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Kulean Microsystems
TANS Electronics
Problanco Electronics
Perfect Parts
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
SupplyDigital Components
UHIMA Technologies
Assy Fe
Durable and lightweight material, suitable for a variety of applications.
Suitable for applications where PNP transistors are required.
Simplified circuit design and easy to use in single transistor applications.
Ideal for switching applications due to its design and specifications.
Compact shape allows for efficient use of space on a circuit board.
Easy to install and secure on a circuit board.
Simple to connect in a circuit setup.
Can be securely mounted on a surface for stability.
Provides consistent and reliable amplification of current in a circuit.
Suitable for applications where high voltage tolerance is required.
High performance and reliable material for transistor applications.
Capable of handling high current loads in a circuit.
Resistant to corrosion and provides good conductivity for terminals.
Simplified terminal configuration for easier setup.
Capable of handling high frequency operations in a circuit.
Power Bipolar Junction Transistors (BJT) 2SB1143S attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
2SB1143S Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
261
Deltrol Controls
Other Relays;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Toshiba
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
JAN2N3055
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Transistor Application: SWITCHING; Minimum DC Current Gain (hFE): 20;
TIP127G
Changzhou Galaxy Century Microelectronics
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; Package Style (Meter): FLANGE MOUNT;
D44H8
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 10 A; JESD-609 Code: e0; Transistor Element Material: SILICON;
BD243C
Rectron
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
BDX53C
Power Innovations
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 8 A; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): FLANGE MOUNT;
TIP42A
Onsemi
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
TIP47
TIP47 by Texas Instruments is a NPN Power BJT with 40W power dissipation, 250V max collector-emitter voltage, and 1A max collector current. Ideal for applications requiring high-power amplification in electronic circuits. Features single configuration, through-hole terminals, and silicon transistor element material.
TIP111
Fairchild Semiconductor
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Package Shape: RECTANGULAR;
PN2907AT&A
Continental Device India
PN2907AT&A by Continental Device India is a PNP BJT transistor with 60V VCEsat, 1.6V VCEsat, and 100 hFE. Ideal for switching applications due to its fast rise/fall times of 40/30ns and high transition frequency of 200MHz. With a power dissipation of 1.5W, it operates in temperatures ranging from -55 to +150°C.
TIP42C
Comset Semiconductors
TIP36C
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 25 A;
TIP117
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 2 A; No. of Elements: 1; Minimum Operating Temperature: -65 Cel;
MJE3055T
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 10 A;
TIP31C
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 3 A;
TIP32C
Kec
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 3 A; Terminal Position: SINGLE;
MJD112T4G
MJD112T4G by Onsemi is a NPN BJT with Darlington configuration, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 2A, and min DC current gain of 200. With a package style of small outline and surface mount capability, it operates up to 150°C making it suitable for various power applications.
TIP29C
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 2 A; No. of Terminals: 3; Transistor Element Material: SILICON;
TIP127
Central Semiconductor
PNP; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A;
TIP115
PNP; Surface Mount: NO; Maximum Collector Current (IC): 2 A; Package Style (Meter): FLANGE MOUNT; Minimum DC Current Gain (hFE): 1000; JESD-609 Code: e0;
2N3055
2N3055 by Texas Instruments is a NPN BJT transistor with 60V VCE, 15A IC, and 115W power dissipation. Ideal for amplifier applications due to its single configuration and silicon element material. Operates at up to 200°C with a transition frequency of 2.5MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2SB1022
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 7 A; Maximum Collector-Emitter Voltage: 60 V; Terminal Finish: TIN LEAD;
2SB1560
Allegro MicroSystems
PNP; Configuration: DARLINGTON WITH BUILT-IN RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 10 A;
Sanken Electric
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): 10 A; Package Shape: RECTANGULAR;
2SB1570
PNP; Configuration: DARLINGTON WITH BUILT-IN RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 150 W; Maximum Collector Current (IC): 12 A;
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): 12 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
2SB1166S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 8 A; No. of Terminals: 3;
2SB1165T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 5 A; No. of Terminals: 3;
2SB1144S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): 1.5 A; Package Body Material: PLASTIC/EPOXY;
2SB1168S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 4 A; No. of Elements: 1;
2SB1143T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): 4 A; Transistor Element Material: SILICON;
2SB1142T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 140 MHz; Maximum Collector Current (IC): 2.5 A; Case Connection: ISOLATED;
2SB1166T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 8 A; Terminal Position: SINGLE;
2SB1167S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 3 A; Terminal Finish: Tin/Copper/Silver/Nickel (Sn/Cu/Ag/Ni);
2SB1165S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 5 A; Package Body Material: PLASTIC/EPOXY;
2SB1167T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 3 A; JESD-30 Code: R-PSFM-T3;
2SB1140T
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 320 MHz; Maximum Collector Current (IC): 5 A; Transistor Element Material: SILICON;
2SB1142R
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 140 MHz; Maximum Collector Current (IC): 2.5 A; Transistor Application: SWITCHING;
2SB1140S
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 320 MHz; Maximum Collector Current (IC): 5 A; Maximum Collector-Emitter Voltage: 20 V;
2SB1203S-E-Q
Power Bipolar Transistors;
2SB1149M
Inchange Semiconductor
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): 3 A; Transistor Application: SWITCHING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved